I WARM 730 User And Installation Manual - Controls and Display

Controls and display 

(fig.1)

1. Symbol for heating system switched on mode.

2. Chosen heating zone No. display.

3. Current floor temperature in the chosen zone (°С).

4. Set temperature (°С) in the chosen zone.

5. "+" key for temperature increase.

6. "–" key for temperature decrease.

7. Key to shift the heating zones.

When the heating is on, a symbol for heating system

switched on mode appears on the screen. When the heating

is switched off the symbol disappears.

Capital figures show the actual current floor temperature

of the chosen zone (position 3); figures in top right show the

set floor temperature in this zone (position 4).

The set temperature may be changed by pressing "+" key

to increase (position 5), and "–" key for decrease (posi

tion 6).

6