IBall baton iB-WRA300N3GT User Manual - page 38
300M Wireless-N ADSL2+ 3G & Broadband Router iB-WRA300N3GT
33
The following table describes the parameters and buttons in this page:
Field
Description
IP Address
It displays the IP address assigned to the DHCP
client from the router.
MAC Address
It displays the MAC address of the DHCP client.
Each Ethernet device has a unique MAC address.
The MAC address is assigned at the factory and it
consists of six pairs of hexadecimal character, for
example, 00-A0-C5-00-02-12.
Expired (s)
It displays the lease time. The lease time determines
the period that the host retains the assigned IP
addresses before the IP addresses change.
Refresh
Click it to refresh this page.
Close
Click it to close this page.
Click
Set VendorClass IP Range
in the
DHCP Mode
page, the page as shown in the
following figure appears. In this page, you can configure the IP address range based on
the device type.