IBall baton iB-WRA300N3GT User Manual - 4.8.4 Dns
300M Wireless-N ADSL2+ 3G & Broadband Router iB-WRA300N3GT
67
Field
Description
Enable SNMP
Select it to enable SNMP function. You need to
enable SNMP, then you can configure the
parameters of this page.
Trap IP Address
Enter the trap IP address. The trap information is
sent to the corresponding host.
Community name
(Read-only)
The network administrators must use this password
to read the information of this router.
Community name
(Read-Write)
The network administrators must use this password
to configure the information of the router.
4.8.4 DNS
DNS
Choose
Access Management
>
DNS
>
DNS
, and the page shown in the following figure
appears.
The following table describes the parameters and buttons of this page:
Field
Description
Set DNS
Automatically
Select it, the router accepts the first received DNS assignment
from one of the PPPoA, PPPoE or MER enabled PVC(s) during
the connection establishment.