IBall baton iB-WRA300N3GT User Manual - page 66
300M Wireless-N ADSL2+ 3G & Broadband Router iB-WRA300N3GT
61
The following table describes the parameters of this page:
Field
Description
ACS
URL
The URL of the auto-configuration server to connect to.
User Name
The user name for logging in to the ACS.
Password
The password for logging in to the ACS.
Periodic Inform
Enable
Select
Enable
to periodically connect to the ACS to check
whether the configuration updates.
Periodic Inform
Interval
Specify the amount of time between connections to ACS.
Connection Request
User Name
The connection username provided by TR-069 service.
Password
The connection password provided by TR-069 service.
Debug
Show Message
Select
Enable
to display ACS SOAP messages on the serial
console.
CPE sends
GetRPC
Select
Enable
, the router contacts the ACS to obtain
configuration updates.
Skip MReboot
Specify whether to send an MReboot event code in the inform
message.
Delay
Specify whether to start the TR-069 program after a short
delay.
Auto-Execution
Specify whether to automatically start the TR-069 after the
router is powered on.