Ibanez Troubadour Owner's Manual - page 10

8

EN

G

LI

SH

Troubleshooting 

1. The power supply cannot be switched ON.

•Checkthatthepowercablehasbeenconnectedcorrectly.

•Trypluggingitintoadifferentpowersupplysocketandseeifthe

same problem occurs.

2.  The power supply can be turned ON, but no sound is 

produced.

•Check that the guitar and microphone have been connected cor-

rectly.

•Removetheeffectsbetweentheguitarandtheamplifierandcheck

to see if no sound is produced.

•Replace the shielded cable and check to see if no sound is pro-

duced.

•Checktoseeifthevolumeontheguitarissetto“0”.

•ChecktoseeifthemicrophoneswitchhasbeenturnedON.

•Checktoseeiftherearebatteriesintheguitar.Ifthereare,check

that they are OK.

•Useadifferentguitarandseeifnosoundisproduced.

•Checktoseeifthevolumeontheampissetto“0”.

3. Noise occurs

•Checktoseeifanythingintheimmediatevicinityisresonatingor

banging against the amplifier to produce the noise.

•Checktoseeiftheplugcoverontheshieldedcableisloose.

•Checkthatthestringaction(distancebetweenstringsandfrets)is

correctly adjusted (not too low).

•Checktoseeiftheguitarbatteriesaredepleted.

•Isthemicrophoneusedasunbalanced?Ifso,noiseoccurseasily.

•Useanotherguitar,microphone,effectsandcabletoseeifthesame

noise is produced.

In the case of defects

This product has passed exhaustive inspections before being shipped 

from  the  factory.  Ensure  that  the  above  procedures  are  carried  out 

when a problem is thought to exist. Contact your dealer in the unlikely 

event  that  an  abnormality  occurs  during  use.  Also,  ensure  that  the 

symptoms of the problem are explained in detail when requesting re-

pairs in order to facilitate swift handling.