IBM Aptiva 2170 Hardware maintenance service manual - page 121
Manual is about: Hardware Maintenance Service
for Service Level A IBM Monitors 2235; 2236; 2237
of
252
Repair Information 87
NOTE: Replacing the Cover
•
To replace the tower cover, lower the cover down over the tower, pressing in
on the sides so the hooks inside the cover fit over the bottom ledge of the
tower. Slide the cover forward into place. Secure the tower cover by
replacing the screws you removed.
CAUTION: When you replace the cover, there are hooks inside the cover that
help fit it to the tower.
1
2