IBM Aptiva 2170 Hardware maintenance service manual - page 207
Manual is about: Hardware Maintenance Service
for Service Level A IBM Monitors 2235; 2236; 2237
of
252
173
Zip Drive Rear Panel Connectors and Jumpers
ATTENTION: Make sure to turn off the power before manual disc eject
operation.
Zip Drive Rear Panel Connectors and Jumpers
Item
Function
Connect to...
1
Power supply connector
Power supply
2
Configuration jumper.
CS
SL
MA
Description
--
--
On
Master
--
--
--
Slave.
On
--
--
Cable select
--
On
--
Reserved(do not use).
--
3
Interface connector
System board
2170: CN12
2171/2172: CN10
4
Emergency Eject Hole
--
Zip Drive Emergency-exit
If for any reason the tray does not eject automatically, insert
and press an eject-bar inside the emergency eject hole to
manually eject the tray. A straightened paper clip with a
diameter of 1.2 mm (typical) can be used as an eject-bar.