IBM Aptiva 2170 Hardware maintenance service manual - page 202
Manual is about: Hardware Maintenance Service
for Service Level A IBM Monitors 2235; 2236; 2237
of
252
168
ATTENTION: Make sure to turn off the power before manual disc eject
operation.
4
Headphone volume control
5
Emergency eject hole.
See CD-ROM Emergency-exit
Disc tray and emergency eject
See CD-ROM Emergency-exit
6
Audio Play
/
Skip track control button
CD-ROM Emergency-exit
If for any reason the tray does not eject automatically, insert
and press an eject-bar inside the emergency eject hole to
manually eject the tray. A straightened paper clip with a
diameter of 1.2 mm (typical) can be used as an eject-bar.
CD-ROM Emergency-exit
Locate the bottom edge of the disc tray. Gently
pry the disk tray open with a screwdriver.
When the disc tray opens, simply remove the
disc from the CD-ROM drive.
CD-ROM Front Panel Introduction