IBM Aptiva 2170 Hardware maintenance service manual - page 177
Manual is about: Hardware Maintenance Service
for Service Level A IBM Monitors 2235; 2236; 2237
of
252
143
Software Recovery Procedure
The Recovery CD includes an install program that can be used to restore the
original system software.
To recover the original software on the hard disk drive, use the following
procedures:
1. Insert the Aptiva recovery CD into the CD-ROM drive then restart computer.
2. Depress F1 while POST to enter BIOS Setup menu. Select and enter
“Startup Options”, set the first priority of boot sequence to CD-ROM. Save
and exit from BIOS Setup.
3. After system boots from recovery CD, you will be prompted with an “IBM
Product Recovery Program” menu, follow the instructions on the screen to
operate the software recovery procedure.