Iclebo Arte YCR-M05 User Manual - ●
11
1.Use the direction button of
remote control to send the
robot cleaner to specific area.
3. If charging ( ) button
of the remote controller is
pressed, it finds and moves
to the charging station
and starts charging.
2. After the vacuum cleaning
robot started the cleaning,
if direction button is pressed,
it moves to the desired direction
while cleaning.
- When backward button is pressed, it turns 180 degree
to make the direction change.
- If the direction button is pressed right after pressing
power button, it moves without cleaning (suction) function.
BASE message is displayed on the display window
of the main body, and after returning to the
charging station, battery mark blinks.
2
1
3
1
2
3
2
1
3
1
2
3
※During the basic cleaning, robot performs the
cleaning in vision mapping method, and the robot
decides when to finish the cleaning. When the
robot decides that the cleaning is finsihed, it
returns to the starting point.
Selected Cleaning
: RANDOM, SPOT
(blinking)
, MAX, Wet Mop
A. RANDOM mode
It cleans with a random
method for the time set by
the user.
1. Press power button
2. Press MODE button to select RANDOM.
3. Set the cleaning time for robot in the display
window. (Default is 60 min. Adjust time with +, -
on remote controller.)
4. Check if light comes on RANDOM mode in the
display window.
5. Press START button.
B. SPOT mode
It uses AUTO mode to perform focused cleaning
within radius 1m area in zigzag mode.
1. Press POWER button.
2. Press SPOT button on the remote controller.
3. Check if AUTO mode is blinking in the display
window. Check display AUTO mode blinking
(SPOT mode setting is completed.)
4. Press START button.
- Robot completes the cleaning in SPOT mode and
returns to the starting point.
C. MAX mode
It starts the cleaning in AUTO mode, finishes the
cleaning in AUTO mode, then changes to
RANDOM mode, and cleans until the battery runs
out.
1. Press POWER button.
2. Press MAX button on the remote controller.
3. Check if lights come on AUTO mode and
RANDOM mode in the display window.
(MAX mode setting is completed.)
4. Press START button.
- Robot cleans until the battery runs out, and returns
to the starting point.
D. WET MOP mode
1. Attach wet mop on the robot.
2. Check if light comes on WET MOP button in the
display window. Deselecting CLIMB is
recommended.
3. Use MODE to select AUTO or RANDOM.
(During the setting of RANDOM mode, set
cleaning time using +,- button: Default is 60 min.)
※Spot mode(partial cleaning) and Max mode
(until battery runs out) are selected by a separate
button on the remote controller.
※In all mode selections, CLIMB is the default value.
If you want to turn it off, click CLIMB button on
the remote controller to turn off CLIMB mode.
(If you turn off CLIMB mode, robot will not go
over doorsills or climb on the carpet.)
●
Usa
ge of
r
obot c
leaner
Using move, charge function