Icom IC-F14 Instruction Manual - page 7
7
2
PANEL DESCRIPTION
2
6
2
PANEL DESCRIPTION
■
Front, top and side panels
q
CHANNEL SW/SELECTOR
• IC-F14S/F24S: Toggle the channel switch to select the pre-pro-
grammed channel 1 or 2.
• IC-F14/F24
: Rotate the channel selector to select the pre-
programmed memory channels.
w
VOLUME CONTROL [VOL]
Rotate to turn the power ON/OFF and adjust the audio level.
r
q
w
y
u
i
e
Microphone
Speaker
t
IC-F14S/F24S
IC-F14/F24
e
LED INDICATOR
(p. 8)
➥
Lights red while transmitting.
➥
Lights green while receiving a signal, or when the squelch is
open.
➥
Lights/blinks orange when the matched 2/5-tone code is re-
ceived, according to the pre-programming.
r
SPEAKER-MICROPHONE CONNECTOR [SP MIC]
Connects the optional speaker-microphone. (p. 31)
t
DEALER-PROGRAMMABLE KEY [Lower]
The desired function can be assigned by your dealer. (p. 9)
y
PTT SWITCH [PTT]
Push and hold to transmit; release to receive.
u
DEALER-PROGRAMMABLE KEY [Upper]
The desired function can be assigned by your dealer. (p. 9)
i
ANTENNA CONNECTOR
Connects the supplied antenna.
D
D
Programmable key reference
Upper
Lower
[SP MIC] jack cover
NOTE:
Attach the [SP MIC] jack
cover when the optional speak-
er-microphone is not used. (p. 4)
IC-F14_F24-2.qxd 04.7.22 0:57 PM Page 6 (1,1)