Icom IC-F5062 Instruction Manual - Function Display
2
1
PANEL DESCRIPTION
■
Function display
I c o m
I n c .
!1
q
w
e
r
t
y
u
i
o
!0
q
SIGNAL STRENGTH INDICATOR
Displays relative signal strength level as shown below.
Weak
Receive Signal level
Strong
w
LOW POWER INDICATOR
Displayed when low output power is selected.
e
AUDIBLE INDICATOR
➥
Displayed when the channel is in the ‘audible’ (unmute)
condition.
➥
Displayed when the specified 2/5-Tone/BIIS*
1
/MDC*
2
code is received.
r
COMPANDER INDICATOR
Displayed when the compander function is activated.
t
SCRAMBLER INDICATOR
Displayed when the voice scrambler function is activated.
y
BELL INDICATOR
Displayed or blinks when the specific 2/5-Tone/BIIS*
1
/
MDC*
2
code is received, according to the presetting.
u
CALL CODE MEMORY INDICATOR
➥
Displayed when the call code memory is selected.
➥
Displayed when a phone call is received.*
3
i
SCROLL INDICATOR
Displayed when the SDM, includes more than 12 charac-
ters, is selected during the received message selection
mode*
1
.
o
SDM INDICATOR
Displayed when an SDM is received, or an SDM is se-
lected for transmission.*
1
!0
ALPHANUMERIC DISPLAY
➥
Displays an operating channel number, channel name,
Set mode contents, DTMF code, etc.
➥
The indication mode can be selected from 1 line or 2
lines. Ask your dealer for details.
• In this instruction manual, the LCD illustration is described
using the 2 lines indication mode.
!1
ACTIVATED KEY INDICATOR
Displayed above the key assigned as [Scan A Start/
Stop], [Scan B Start/Stop], [Scan Add/Del(Tag)], [Lock],
[Talk Around], [Surveillance] and [BIIS button]*
1
keys dur-
ing that key is activated.
*
1
BIIS operation only
*
2
MDC operation only
*
3
LTR
®
operation only
See the operating guide for details of BIIS, MDC, LTR
®
and
Digital system operations. Ask your dealer for details.