Icom IC-F510 Instruction Manual - page 2
R
WARNING! NEVER
connect the transceiver to an
AC outlet. This may pose a fire hazard or result in an electric
shock.
R
WARNING! NEVER
connect the transceiver to a
power source of more than 16 V DC such as a 24 V battery.
This connection will ruin the transceiver.
R
WARNING! NEVER
cut the DC power cable be-
tween the DC plug and fuse holder. If an incorrect connection
is made after cutting, the transceiver might be damaged.
R
WARNING! NEVER
place the transceiver where
normal operation of the vehicle may be hindered or where it
could cause bodily injury.
CAUTION! NEVER
allow children to touch the trans-
ceiver.
CAUTION! NEVER
expose the transceiver to rain,
snow or any liquids.
USE
the supplied or optional microphone only. Other micro-
phones have different pin assignments and may damage the
transceiver.
DO NOT
use or place the transceiver in areas with tem-
peratures below –25°C or above +55°C or, in areas subject to
direct sunlight, such as the dashboard.
IMPORTANT
READ ALL INSTRUCTIONS
carefully and com-
pletely before using the transceiver.
SAVE THIS INSTRUCTION MANUAL —
This
instruction manual contains important operating instructions
for the
IC-F510 VHF TRANSCEIVER AND IC-F610 UHF
TRANSCEIVER
.
EXPLICIT DEFINITIONS
WORD
DEFINITION
R
WARNING
Personal injury, fire hazard or electric
shock may occur.
CAUTION
Equipment damage may occur.
NOTE
If disregarded, inconvenience only. No risk
of personal injury, fire or electric shock.
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incor-
porated (Japan) in Japan, the United states, the United Kingdom, Germany,
France, Spain, Russia and/or other countries.
PRECAUTIONS
i