Icom IC-F521 Instruction Manual - page 2
RWARNING! NEVER
connect the transcever to an
AC outlet. Ths may pose a fire hazard or result n an electrc
shock.
RWARNING! NEVER
connect the transcever to a
power source of more than 16 V DC such as a 24 V battery.
Ths connecton wll run the transcever.
RWARNING! NEVER
cut the DC power cable be-
tween the DC plug and fuse holder. If an ncorrect connec-
ton s made after cuttng, the transcever mght be damaged.
RWARNING! NEVER
place the transcever where
normal operaton of the vehcle may be hndered or where t
could cause bodly njury.
CAUTION! NEVER
allow chldren to touch the trans-
cever.
CAUTION! NEVER
expose the transcever to ran,
snow or any lquds.
USE
suppled or optonal mcrophone only. Other mcro-
phones have dfferent pn assgnments and may damage the
transcever.
DO NOT
use or place the transcever n areas wth tem-
peratures below –22°F (–30°C) or above +140°F (+60°C), or
n areas subject to drect sunlght, such as the dashboard.
PRECAUTIONS
IMPORTANT
READ ALL INSTRUCTIONS
carefully and com-
pletely before usng the transcever.
SAVE THIS INSTRUCTION MANUAL —
Ths
nstructon manual contans mportant operatng nstructons for
the
IC-F521 VHF TRANSCEIVER and IC-F621 UHF TRANS-
CEIVER.
EXPLICIT DEFINITIONS
WORD
DEFINITION
RWARNING
Personal njury, fre hazard or electrc
shock may occur.
CAUTION
Equpment damage may occur.
NOTE
If dsregarded, nconvenence only. No rsk
of personal njury, fire or electrc shock.
Icom, Icom Inc. and the
logo are regstered trademarks of
Icom Incorporated (Japan) n the Unted States, the Unted Kng-
dom, Germany, France, Span, Russa and/or other countres.