Icom IC-F610 Instruction Manual - Panel Description
1
1
PANEL DESCRIPTION
■ Front panel
qAF VOLUME CONTROL KNOB
Rotate the knob to adjust the audio output level.
• Minimum audio level is pre-programmed.
wLEFT UP/DOWN [∫
∫]/[√
√] KEYS
Push to select the talk group on the LTR or PassPort sys-
tem.
eFUNCTION DISPLAY
Displays a variety of information, such as an operating
channel text, talk group text.
NOTE: The above functions depend on pre-programming.
rRIGHT UP/DOWN [
]/[
] KEYS
➥Push to select the operating system.
➥Push [
] key to send the most recently transmitted
DTMF code number during transmitting.
tDEALER-PROGRAMMABLE KEYS [P0] to [P4]
Desired functions can be programmed independently by
your dealer.
yPOWER SWITCH [POWER]
Push to turn the power ON and OFF.
• At power ON, a power-up alert tone sounds for about 1 sec. and
an opening message may appear. And the transceiver automati-
cally starts scanning if the scan function had been activated
before the power was turned OFF.
uMICROPHONE CONNECTOR
Connect the supplied microphone or optional DTMF micro-
phone.
NEVER connect non-specified microphones. The pin
assignments may be different and the transceiver may
be damaged.
D
D MICROPHONE
The supplied microphone has a PTT switch and a hanger
hook.
q
r
e
w
u
y
t
IC-F610_F620_F621-2.qxd 04.3.17 3:51 PM Page 1 (1,1)