Icom IC-PCR1000 Instruction Manual - page 10
2
PANEL DESCRIPTION
7
!3
BUSY indicator
Appears when receiving a signal or when signal noise opens
the squelch.
!4
Signal meter
Indicates the receive signal strength. Also indicates the S-
meter squelch receive level set via the [SQUELCH] scroll bar.
!5
Center indicators
Indicate the tuning level when selecting the 6 kHz or 15 kHz
IF filter in FM mode.
!6
STOP button
Cancels scan operation.
!7
PROG (program scan) button
Used to start/stop program scan. The indicator lamp lights
during scan and Program SCAN appears in the Condition in-
dicator window.
!8
II (scan pause) button
Used to pause/resume a scan. When a scan is paused,
Pause appears in the Condition indicator window.
!9
AUTO (auto memory write scan) button
Used to start/stop auto memory write scan. The indicator
lamp lights during scan and Auto MW SCAN appears in the
Condition indicator window.
@0
Condition indicator window
Indicates the scan function operating condition. When scan
temporarily pauses to receive a signal Busy Stop appears.
@1
MEMO (memory scan) button
Used to start/stop any of the memory scans. The indicator
lamp lights during scan and Memory SCAN appears in the
Condition indicator window.
@2
SET button
Shows/hides the [Setting] dialog box used to adjust settings
for scan functions, the band scope function and the automatic
mode function.
!3
!4
!5 !6!7!8 !9 @0 @1 @2
@3
@4@5
@6
@7
@8
@9
#0
#1
#2
#3
#4
#5
#6
#7
#8