Icom IC-PCR1000 Instruction Manual - Software Installation
1
INSTALLATION
5
■
Software installation
NOTE: Before using the program, make a backup copy of
the original disk. After making a backup copy, keep the
original disk in a safe place.
D
Windows 95
q
Boot up Windows.
- Quit all applications when windows is running.
w
Insert the backup disk 1 into the appropriate floppy drive.
e
Select ‘Run’ from the [Start] menu.
r
Type the setup program name with full path name, then
press the [Enter] key. (A:\SETUP [Enter])
t
Follow the prompts.
y
Program group ‘IC-PCR1000’ appears in the ‘Programs’
folder of the [Start] menu.
D
Windows 3.1
q
Boot up Windows.
- Quit all applications when windows is running.
w
Insert the backup disk 1 into the appropriate floppy drive.
e
Select ‘Run’ from the File menu of the Program Manager.
r
Type the setup program name with full path name, then
press the [Enter] key. (A:\SETUP [Enter])
t
Follow the prompts.
y
Program group ‘IC-PCR1000’ appears in the Program
Manager.
D
On-line help information
See the on-line help for software usage.
q
Click the [Contents] in the [Help] menu to bring up the on-
line help.
w
Click the desired information you want to know.
D
Software update information
Software update information will be available at the Icom
America home page:
http://www.icomamerica.com/
■
Serial port setting
Select the RS-232C serial port correctly if the title bar dis-
plays “COM port trouble?”.
q
Before launching the program make sure the IC-PCR1000
interface unit power is turned on (the LED lights when
power is on).
w
Launch the IC-PCR1000 software.
e
Click the [POWER] button in the tool bar to temporarily
pause the program.
r
Click the [PORT] button to bring up the [RS-232C PORT
Number] dialog box.
t
Click the desired port COM number to choose it.
y
Click the [OK] button.