Icom IP100H Instructions - page 2
PANEL DESCRIPTIONS
Front and side panels
D
[PWR/VOL] knob
Turns the communication terminal pow-
er ON or OFF and adjusts the audio out-
put level.
Function display
[ / ] jack
(External microphone/speaker jack)
Connect an optional speaker-micro-
phone or headset for hands-free, full-du-
plex operation.
CAUTION: Attach the jack cover when
optional equipment is not used.
Be sure to turn power OFF before con-
necting or disconnecting optional equip-
ment to or from the [ / ] jack.
Function keys
Internal speaker
When an optional speaker-microphone
or headset is connected, the internal
speaker is disabled.
[
] (Address) key
Repeatedly push to select an address
book from All, Group, Individual or Tele-
phone.
Selectable address book may differ depend-
•
ing on the IP1000C settings.
Push [
•
J]/[K] to select a desired address.
[ ] (Call History) key
Repeatedly push to select call history
from the TX log, RX log, TX MSG log, RX
MSG log, TX TEL log or RX TEL log.
Push [
•
J]/[K] to select a desired log.
[J] (Up)/[K] (Down) keys
Push to select a desired address (ID),
log, message, status or the Area Call
function.
[FUNC] key
After a desired address is selected, re-
peatedly push to select a message, sta-
tus or the Area Call function select sta-
tus.
Selectable functions may differ, depending
•
on the IP1000C settings.
Push [
•
J]/[K] to select a desired message,
status or the function setting.
[CLR•
](Clear•Lock)key
Push momentarily to select the stand-
•
by screen.
Hold down for 1 second to turn the Key
•
lock function ON or OFF.
Function keys
D
Antenna connector
Attach the supplied antenna.
Or, attach the supplied antenna connec-
tor cap, if the internal antenna is used.
CAUTION: NEVER HOLD just the at-
tached antenna when carrying the
communication terminal.
[Option] key
Push to hang up an telephone call.
Or, push to select one of the often used
messages or IDs, depending on the set-
tings.
Internal microphone
When the VOX function is used, the in-
ternal microphone is disabled.
[PTT] switch
In the simplex mode, hold down to trans-
mit, and release to receive.
In the full-duplex mode, push to make a
call.
Using the BC-202
D
The BC-202 rapidly charges a battery pack.
Charging time: Approximately 2 hours for the BP-271
Approximately 3.5 hours for the BP-272
The following item is required.
•Apoweradapter(Adifferenttype,ornopoweradapterissupplied,
depending on the charger versions).
Desktop charger
BC-202
AC outlet
Charging
indicator
Battery pack
Communication
terminal
+ battery pack
Tapping screws
3.5×30 mm
Turn OFF the power
Power adapter
Using the BC-211
D
The BC-211 rapidly charges up to 6 battery packs.
Charging time: Approximately 2 hours for the BP-271
Approximately 3.5 hours for the BP-272
The following item is required.
•Apoweradapter(notsuppliedwithsomeversions).
AC outlet
Power adapter
(BC-157S)
Multi-Charger
BC-211
Charging indicator
(one for each slot)
Battery pack
Communication
terminal
+ battery pack
Turn OFF the power
BATTERY CHARGING
CALLING PROCEDURES
Push [
q
] one or more times to select a desired address
book.
Select “All” for all stations call, “Group” for group call, “Individu-
•
al” for individual station call or “Telephone” for telephone call.
Selectable address book may differ according to the IP1000C's
•
setting.
Push [
w
J]/[K] one or more times to select a desired ID or
extension number.
Selectable ID or extension number may differ according to the
•
IP1000C's setting.
You can select a desired ID or extension number from call his-
•
tory by pushing [
] for easy recalling.
If you want to send a message or status, or make an Area
e
Call, push [FUNC] one or more times.
Select “Message” to transmit a message, “Status” to transmit a
•
status, or “Area Call” for an Area Call.
When Area Call is selected, push [
•
J]/[K] to select ON.
Push [PTT] to make a call.
r
Hold down [PTT], and speak at your normal voice level.
t
Release [PTT] to listen.
y
Repeat the steps
u
t
and y until you finish your conver-
sation.
To hang up the telephone call, push [Option].
i
For your information
When the VOX function or full-duplex mode is set in the
IP1000C, the steps t and y are not necessary.
When the VOX function is set, speak into the headset micro-
phone to transmit, then stop speaking to listen.
In full-duplex, you can speak and hear the other person at
the same times.
OPTIONS
BP-271/BP-272
•
Li-ion
battery
packs
BP-271: 7.4 V/1150 mAh (min.), 1200 mAh (typ.)
BP-272: 7.4 V/1880 mAh (min.), 2000 mAh (typ.)
BP-273
•
battery
case
For LR6 (AA) × 3 alkaline batteries
BC-202
•
desktop
charger
+ BC-123S
ac
adapter
BC-211
•
multi
-
charger
+ BC-157S
ac
adapter
MB-127
•
belt
clip
HM-153
•
earphone
microphone
+ OPC-2144
adapter
cable
HM-166
•
earphone
microphone
+ OPC-2144
adapter
cable
HM-153LS/HM-166LS
•
earphone
microphones
HM-186
•
speaker
-
microphone
+ OPC-2144
adapter
cable
HM-186LS
•
speaker
-
microphone
For simplex operation
HS-85
•
vox
unit
+ OPC-2144
adapter
cable
HS-94/HS-95
•
headsets
/
HS-97
throat
microphone
+ OPC-2006LS
adapter
cable
/
OPC-2328
ptt
switch
cable
HS-94:
Ear-hook type
HS-95:
Neck-arm type
OPC-2006LS:
For VOX operation
SP-13
•
earphone
+ OPC-2144
adapter
cable
LC-181
•
carrying
case
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incor-
porated (Japan) in Japan, the United States, the United Kingdom, Germany,
France, Spain, Russia and/or other countries.
All other products or brands are registered trademarks or trademarks of their
respective holders.
Morisawa font is used in this product.
Function display
D
1/23 12:34
All
1/23 12:34
Back to office ASA
Blinks
Scrolls
Standby screen
When a message is received
• Signal strength indicator
Displays the signal strength in 3 levels when your communi-
cation terminal is in a service area.
“ ” blinks when you are out of the service area, and “ ” ap-
pears if your communication terminal is not registered, or not
connected to the IP1000C.
• Call mode icon
: Appears when All or Group call is selected.
:
Appears when Individual call is selected.
: Appears when Telephone call is selected.
• Area Call function icon
Appears when the Area Call function is ON.
• Pocket beep function icon
Appears when the Pocket beep function is ON.
• P-Bell function icon
Appears when the P-Bell function is ON.
• Key lock function icon
Appears when the Key lock function is ON.
•
Battery indicator
Displays the attached battery pack's remaining battery charges.