Interface 9834 Instruction Manual - page 13
Page 10
OPERATING INSTRUCTIONS
TURN-ON INSTRUCTIONS
Reference Figures 3 and 4 for proper input and output signal wiring.
1. Apply power to the instrument.
2. Verify the instrument readout blanks momentarily, then displays
the value of the input signal.
PROGRAM INSTRUCTIONS
Four front panel switches (S1, S2, S3 and S4) allow the user to program Filter Window (bAnd),
Filter 1- (FILtEr), Decimal Point (dP), Calibration Number (CAL), Full Scale Number (FS),
Setpoint to Monitor (SP -), Setpoint to be (SP HI), Setpoint Value (Set SP), Hysteresis Low (HL)
and Hysteresis High (HH) values.
1. Depress MODE (S1) once.
The text
COdE
will be displayed. Depress the switches in the sequence shown.
S3 - S2 - S3
The text
CAL OFF
will be displayed This disables the CAL function of the
INCREMENT/CAL switch. To enable the CAL function depress the
INCREMENT or DECREMENT switch. The text
CAL ON
will be displayed.
Depressing the MODE switch will enable the CAL function. To exit the
MODE sequence without enabling the INCREMENT/CAL switch,
depress the RESET switch.
2. Depress MODE (S1) switch once.
The text
bAnd
followed by the current value of the Filter Window
will be displayed. Use S2, S3 and/or S4 to change the current value.
To store the selected value in non-volatile memory, depress the
MODE switch. To exit the MODE sequence, without storing the new
value in non-volatile memory depress the RESET switch. Reference
Filter Window in the Function Definitions section for more information.
3. Depress MODE (S1) switch once.
The text
FILtEr
followed by the current setting of the Filter value will
be displayed. Use S2, S3 and/or S4 to change the value.
To store the selected value in non-volatile memory, depress the MODE
switch. To exit the MODE sequence, without storing the new value in
non-volatile memory, depress the RESET switch. Reference Filter Value
in the Function Definitions section for more information.
MODE
TARE
CAL
CAL
TARE
SP1
SP2
SP1
SP2
Model 9834
DISP
RESET
REF
PK
VAL
S1 S2 S3 S4
S5
S7
S6