Intergraph InterServe 80 SL Manual - Installing Qfe Software
6
2. When prompted, press
S
to specify a mass storage device other than those listed.
3. When prompted, select Other from the list of devices presented.
4. Follow the prompts to install the driver from the 2940
SCSIDRV
backup diskette. When
presented with a list of Adaptec SCSI controllers, select the entry for Windows NT 4.0.
Installing the InterCON-X RS-232 Adapter Driver
If you install an InterCON-X RS-232 adapter in your InterServe 80, be sure to install the
driver software for this adapter from the Microsoft Windows NT Server software CD-ROM.
Installing QFE Software
Quick-Fix Engineering (QFE) update software contains fixes for operating system problems or
limitations. If a system requires Quick-Fix Engineering (QFE) update software, it is installed
on the system before it leaves the factory. If QFE update software is installed on the system, a
QFE backup diskette is delivered with the system. You can also create a QFE backup diskette
using InterSite Version Manager.
If you reinstall the Windows NT 4.0 operating system, and the Windows NT 4.0 Service Pack
3 software, be sure to reinstall the QFE update software as well. Install the QFE update
software after you reinstall Service Pack 3 software. QFE update software contains post-
Service Pack 3 fixes.