Interserve 800 sl late-breaking news november 1998 dha030140
Copyright 1998 intergraph computer systems. All rights reserved. This document contains information protected by copyright, trade secret, and trademark law. This document may not, in whole or in part, be reproduced in any form or by any means, or be used to make any derivative work, without written ...
1 general 450 mhz pentium ii processors systems are now shipping with 450 mhz pentium ii processors. If your system has 450 mhz pentium ii processors, please note that these processors may not be mentioned in your system’s documentation. Three-button primax mouse if your system was delivered with a ...
2 intrusion alert on initial system shipments on initial shipments of interserve 800 sl, the intrusion alert available through intersite hardware monitor was not enabled. If you need to use this feature and find it not functional, check the support pages on the world wide web (http://www.Intergraph....
3 see the system setup document delivered with the system for detailed information on using bios setup to change bios settings. In bios setup, go to the main screen, select the mps version, and change its setting to 1.1. Configuration utility for symbios scsi adapter on a system equipped with an opt...
4 windows nt 4.0 installing 3com network adapter driver software on a system with a 3com network adapter, the driver software is not preinstalled. You must install the driver software during operating system setup. To install 3com network adapter driver software during setup: 1. When prompted to ins...
5 go to devices/modems in the control panel, and use the modem wizard to auto-detect the pc card modem. Follow the directions displayed to select the proper driver software for the pc card modem..
6.
