Interserve 800 late-breaking news june 1998 dha027720
Copyright 1998 intergraph computer systems. All rights reserved. This document contains information protected by copyright, trade secret, and trademark law. This document may not, in whole or in part, be reproduced in any form or by any means, or be used to make any derivative work, without written ...
1 general disk activity led on non-raid systems on non-raid systems, the raid disk array status led does not light to show non-raid disk activity. When the system is powered off, this led is not lit. This differs from the activity of this led as described in the system setup document. System bios no...
2 third channel for secondary raid controllers when expanding an interserve 800 to use the third channel of any secondary raid controllers, the internal cables extend from the pci slots to the third-channel ports above the i/o panel. Attach the internal third-channel cable from one of the additional...
3 ism server reset options on a system without redundant power supplies on an interserve 800 without redundant power supplies, intersite server monitor (ism) software does not support the following server reset options: u if the server poweroff option is selected, the server reboots. U if the server...
4 windows nt 4.0 installing qfe software quick-fix engineering (qfe) update software contains fixes for operating system problems or limitations. If a system requires quick-fix engineering (qfe) update software, it is installed on the system before it leaves the factory. If qfe update software is in...
