J&M Corporation ROKKER JAMP-630HC06-SGP Installation and operation instructions

Summary of ROKKER JAMP-630HC06-SGP

  • Page 1

    Rokker® xxrp 630w amplifier kit for 2006-2013 harley® street glide with lower/rear speakers # jamp-630hc06-sgp installation and operation instructions.

  • Page 2

    Product description this new j&m rokker xxrp dsp controlled 4-channel 630 watt rms fairing/rear speaker amplifier kit has been designed specifically for use on the 2006-2013 harley® streetglide (not for 2011-2013 cvo) with the stock harley hk radio with rear-lid or lower-fairing speakers added. The ...

  • Page 3

    Move outside fairing brace remove fig. D 6. Relocate the large plugs from the inside of the fairing braces to the outside of the the fairing braces. (figure d) 7. Remove the (4) rubber grommets from the top of the factory radio. (figure d) fig. E 8. Position the j&m amp/bracket assembly above the ra...

  • Page 4

    Fl fr rl rr power harness front amplifier green green/ brown brown white/ brown right speaker gray/ red green/ black left speaker white/ orange green/ white white red white red right speaker left speaker front factory speaker harness gray/ red green/ black green/ white white/ orange right left orang...

  • Page 5

    Fig. H rokker® xxrp 630 full range class d amplifier output power (rms) @ 1% thd 1000hz 14.4v cea 2006 stereo @ 4ohms 4 x 157.5 watts – 630w rms total stereo @ 2ohms 4 x 157.5 watts – 630w rms total frequency response -3db 1hz - 69khz capable s/nratio separation >90db >74db input sensitivity .35v - ...