JabloCom JabloPhone GDP-04i User Manual - Pc-���
XC_GDP-04i.ENG.MAN.Manual.15.A
- 12 -
EN
U
se
r‘
s
G
u
id
e
Warning:
Synchronize your GDP-04i’s phonebook data with PC before starti ng of fi rmware
update to prevent possible data loss!
UpdateTool will off er you all fi rmware versions available for your phone. Choose Bootloader, Soft ware and the Lan-
guages you want to upload into your phone and select
Apply
. The phone will automati cally switch to standby mode
as soon as the upload is fi nished.
PC-
You can use the GDP-04i as a PC-fax for sending/receiving your faxes from/to your PC.
To use the GDP-04i as a PC-fax, you have to install fax service (opti onal component of Microsoft Windows installa-
ti on). This will add FAX as printi ng device in the list of your printers. Open properti es of FAX and select GDP-04i as a
device for sending/receiving faxes during installati on of a fax feature of your operati ng system.
To acti vate automati c receiving of incoming faxes you have to set-up Fax Console (Start/All Programs/Accessories/
Communicati ons/Fax/Fax Console).
Warning:
Digital fax functi on may not work properly unless it is fully supported by your GSM
service provider.
C (GDP-04A )
The GDP-04Ai off ers you the possibility to connect a standard analog phone.
This feature allows you to operate an analog phone in a similar way as if it is connected to a standard fi xed line net-
work (PSTN), but over a GSM network.
You can dial a number from the GDP-04Ai as well as from the analog phone. They can not be used simultaneously.
The call is executed through your GSM connecti on in both cases.
An incoming call rings on the GDP-04Ai as well as on the att ached analog phone. The user can answer the call from
either phone.
To switch an ongoing call from the GDP-04Ai to the att ached analog phone, press the “Space” key (on the character
keyboard). You will hear the ringing signal of three short beeps. You will be disconnected once the analog phone
answers the call. You may hang up now.
To switch an ongoing call from the att ached analog phone to the GDP-04Ai, press the FLASH on the phone, wait for
the call to be answered on GDP-04Ai and then hang up.
Only one phone or master PBX line (home exchange unit) can be att ached.
Warning:
Never connect the GDP-04Ai into a wall socket of a fi xed line network (PSTN).
T
JABLOCOM is improving the GDP-04i phone soft ware as well as the JabloTool call management soft ware conti nu-
ously. If you fi nd an incorrect phone behavior, please check if you use the latest available fi rmware version within the
JabloTool (menu Tools, Update Firmware). Detail update instructi ons as well as the latest JabloTool version you can
fi nd on our website - www.jablocom.com/download.
Problem / Error message
Soluti on
No SIM card
Your SIM card is not placed in the SIM holder correctly or the phone does not support your SIM card type.
Check if the SIM card is placed in the holder correctly or contact your GSM service provider.
Registrati on to network failed!
The network refused to register your SIM card into the network. Contact your service provider.
Functi on executi on failed
The network did not correctly perform the USSD command you sent. Check the command syntax or contact
your service provider.
USSD code refused by network
The network refused the USSD command during USSD dialog. Repeat sending the command or contact your
service provider.
Unable to process
There is a confl ict between your request and the current phone status, for example during phonebook
import from SIM. Repeat your request.
Sending failed
Your text message was not sent to the network correctly. Check the phone number and try again. If the error
repeats, contact your service provider.
Analogue line error - deacti vated
Possible problem on the att ached analogue phone. Unplug the GDP-04i power adaptor, check your analog
phone and its cable and reconnect power adaptor to the GDP-04i.
Error
Wrong input or acti on was performed, for example an incorrect service code or an incorrect SIM toolkit
command. Confi rm you are using correct code.
Incorrect entry
An incorrect PIN was entered. Enter a correct one.
System error
Internal error of the phone. Switch the phone off , disconnect the internal batt ery for about 10 seconds and
then switch the phone on again. If the error repeats, return the phone for service.