JabloCom JabloPhone GDP-04i User Manual - O������
XC_GDP-04i.ENG.MAN.Manual.15.A
- 6 -
EN
U
se
r‘
s
G
u
id
e
O
Some special functi ons are selectable under the
Options
menu in the normal operati ng mode.
Silent mode / Normal mode
This functi on allows switching to the silent mode where all sound alerts and rings are disabled. This allows a user to
stay connected to the network while not being disturbed by incoming calls or text messages.
Switch Off
This functi on turns off the phone. When turned off , the phone cannot make or receive any calls or text messages.
The batt ery charging functi on is acti ve whenever the power adaptor is connected, even when the phone is switched
off . The batt ery charger progress indicator on the display will be acti ve when the phone is off , if the batt ery is charg-
ing.
The phone can also be switched off by pressing
for more than 3 seconds.
In order to switch the phone back on, press and hold
unti l
“
The phone is star ting...
” message appears
on the display.
The phone will start automati cally when the power cable from the adaptor is re-connected into the phone.
Travel mode Off
This feature ensures that the phone will not be switched on accidentally. Travel mode is acti ve only when the phone
is powered from the batt ery only.
To switch the phone on again from the travel mode, press and hold
unti l the red light is acti vated and then
type the word “START” on the character keyboard or connect the power adaptor again.
Cell lock
If the cell lock functi on is available on your network and your GSM service provider acti vated it on your SIM card, you
can see a
icon while connected within the home locati on.
A
Some of the advanced call functi ons will not work properly unless they are supported by your GSM operator.
C W
The call waiti ng functi on indicates an incoming call even when another call is in progress.
To use the call waiti ng functi on, please check that you have acti vated it in the GSM network setti ng – see
chapter Setti ngs.
If a new incoming call is indicated, press
to answer the waiti ng call. Also you can select
Options
and
Switch
functi on by using the selecti on key. The fi rst call is put on hold. To switch between the calls press
again. Either call can be canceled by
.
C C
The conference call functi on is a network service that allows up to six people to take part in a conference call.
To arrange a conference call:
• Establish a call to the fi rst parti cipant
• To add new parti cipant into the conference call enter the phone number directly and press
or select the
contact from phonebook and press the
Select
selecti on key. You may put the fi rst call on hold if you want by
pressing the
Options
selecti on key and then the
Hold
selecti on key.
• When the new call has been answered, press
Options
and
Join calls
. The message
Conference
appears
on the display.
• To add another parti cipant to the conference call, repeat the previous steps. The maximum number of remote
parti es is 5.
• To have a private conversati on with one of the parti cipants, press the
Options
selecti on key and select
Pri-
vate #
. Scroll to the desired parti cipant and press the
Select
selecti on key. Once you have fi nished the private
conversati on, re-establish the conference by pressing the
Options
selecti on key and then the
Join calls
selecti on key.