Jabra FREEWAY User Manual - English
12
ENGLISH
JABRA FREEWAY
If your radio supports RDS it will automatically adjust to the new
frequency . If it doesn’t you have to manually set the radio to the
new frequency .
Note:
When in FM mode the volume controls on the FREEWAY are
disabled . Use the volume control on your car radio instead .
QUICK REFERENCE TABLE FOR MANUALLY CONTROLLING YOUR
JABRA FREEWAY
Function
Action
Entering pairing
mode
Press and hold the
Answer/end
button while sliding the Power switch
into the
On
position
Cancel pairing mode
Tap the
Answer/end
button
Answer call
Tap the
Answer/end
button
End a call
Tap the
Answer/end
button
Reject a call
Double tap the
Answer/end
button to
reject an incoming call
Initiate phone voice
dial*
Tap the
Voice
button when connected
and not on an active call .
Enable or disable
Voice Guidance and
commands
Press and hold the
Voice
button while
sliding the Power switch into the
On
position . You will hear ”Voice on” when
you enable and ”Voice off” when you
disable the voice features .
Reset to factory
default
Turn on the FREEWAY and press and
hold the
Answer/end
,
Voice
and
Mute
button together for about 6 seconds .
When the FREEWAY is reset it will
automatically go into pairing mode .
Night driving mode
When powered on you can tap the
Vol-
and
Vol+
simultaneously to
disable the LED’s . And again to enable
them again . The LED’s will be enabled
every time you reconnect or power on
the FREEWAY .
* Phone dependent