Jadever JCN User Manual - 0 ~9
4
4-2-2 Keyboard
1)
0 ~9
numeric keys
Enter
specific values for tare; unit weight and other data entries.
2)
●
key
Decimal point
3)
SMPL
key Short press
to enter
the sampling mode. Long press
to close
ACAI
after sampling. And shift Units when
setting capacity
.
4)
G N/SET
key Shift the displays of Gross weight and Net weight after tare. Long press to
enter parameters setting. And turn on or
turn
off check weighing when entering HI, LO, OK
setting.
5)
UWS/ITEM
key Find out the unit weight in memory or
reset the unit weight again. Input
the indicated unit weight via numeric keys and press it to start counting function.
6)
M+/SAVE
key Accumulate the records of counting or weighing. Save the changing
parameter. Set the capacity and resolution.
7)
M-/HI
key Clear the input figures. Set the value of HI. Enable the blinking figure plus
one when inputting the figures.
8)
ZERO/ESC
key
Zero
the display (within 2% of max.capacity) or
cancel
Tare action.
Exit from the setting
without
saving.
9)
/MR
key
Recall and display
the total Accumulation data (weight, total count and
number of weightments ) and the first 10 records in details. Circle the choices in the
setting. Make the blinking spot shift leftwards when inputting the figures.
10)
PRINT/LO
key Press the key to print when printing manually is selected. Set the LO
value. Enable the blinking figure decrease one when inputting the figures.
11)
TARE/
key
Input
the weight of the object on the weighing pan as a Tare value ; Inputs
the indicated value entered via the numeric keys as a pre-set Tare value ; cancel tare
action.
Display
rightwards
the first 10 records in detail. Make the blinking spot shift
rightwards when inputting the figures.