Jadever JCN User Manual - Set08
7
Ok: There will be a warning sound when the quantity of the articles is between the upper
and lower limit (including the upper and lower limits).
Lo:
There will be a warning sound when the material quantity is less than the lower limit,
and the weight of the material is more than 20 divisions.
Out: There will be a warning sound when the material quantity exceeds the upper
or
lower
limits, and the weight of the material is more than 20 divisions
no.beep: No sound alarm.
8)
SET07
external equipment setting: PC 、JMS、Godex 、BIRCH、ZEBRA、
GP、DMP、CK 、ET 、CX、
U.KEY.
PC: computer output
JMS: connect with weighing system
GODEX: Godex printer (paper size 5cm*3cm)
BIRCH: Birch printer(paper size 5cm*3cm)
ZEBRA: Zebra printer(paper size 5cm*3cm)
GP: Adhesive sticker label printer (paper size 5cmx3cm)
DMP: Dot matrix printer(SH-24)
CK: thermal printer (Chinese available)
ET: Large LED display
CX: CX large screen display (version 0.02)
EXCEL:
Work with the function of ―Use Serial Keys‖ in Windows in outputting the data to
Excel. Reference user manual: http://www.jadever.com.cn/Download.aspx
U.KEY: U.KEY connector works with PC to send the weighing data to computer
(WinXP/Win7) in form of Excel and so on.
Note: Special setting is needed by distributor if you want to print in Chinese.
9)
SET08
baud rate setting: 9600、4800、2400
10)
SET09
printing modes setting: key,stable,contin
contin:Printing continually
stable:
Printing automatically when get a stable weight (more than 20d)
key:Printing by pressing keys
11)
SET10
printing format setting: prt01~prt03