JALpower D-NS SERIES User Manual - page 4
03
04
3.2
.
2 Package
To allow dissipation of heat, and for convenience of dismantling, clearances around the inverter must be at least:
Upward
----------
300mm
Downward
--------
500mm
Front
-------------
300mm
Both sides
---------
200mm
Figure 3.3.1-2
Wall-mounted
Bracket
×
1
Inverter
×
1
DC PlugX2pair*
&
AC PlugX1*
or
3.3.1 Selecting the installation location
The following must be considered when selecting the best location for an inverter:
●
The mount and installation method must be appropriate for the inverter's weight and dimensions.
●
The location must be well ventilated and sheltered from direct sunlight.
●
The inverter must be installed vertical or with a backward tilt less than 15°. No sideways tilt is allowed. The connection
area must point downwards. Refer to Figure 3.3.1-1.
Figure 3.3.1-1
3.3 Inverter Installation
Max
15
°
300mm
500mm
200mm
200mm
300mm
User Manual
×
1
Quick Installation
Guide
×
1
User
manual
Quick
Installation
Guide
Antenna
×
1
Wi-Fi Connection
Guide
×
1
(
Wi-Fi model only)
Wi-Fi
Connection
Guide
AC Terminal×4*
Screw
×
4
Expansion Bolts
×
5
Terminal×1*
*
There is 1 pair of DC connectors in NS Series 1-3KW. and 2 pairs of DC connectors in NS Series 3.6-5KW and D-NS Series 3-5KW
;
*
AC connector is applied to both NS Series 3.6-5KW and D-NS Series 3-5KW;
*
AC terminal is applied to NS Series 1-3KW;
*
There are 2 terminals in Australian model
。
3.3.2 Mounting Procedure
(
1) Use the wall-mounted bracket as a template and drill holes in the wall, 10 mm in diameter and 80 mm deep. NS 1kW~3kW
referred to Figure 3.3.2-1, NS 3.6kW~5kW & D-NS 3kW~5kW referred to Figure 3.3.2-2.
(
2) Fix the wall mounting bracket on the wall using the expansion bolts in the accessories bag.
(
3) Hold the inverter by the side
groove as Figure 3.3.2-3.
(
4) Install the inverter on the wall-mounted bracket. NS 1kW~3kW referred to Figure 3.3.2-4, 3.3.2-5. NS 3.6kW~5kW & D-NS
3kW~5kW referred to Figure 3.3.2-6, Figure 3.3.2-7.
1. PV input terminals
2. DC Switch (Optional)
3. RS-485 port
or
USB port
4. Wi-Fi antenna port
(Optional)
5.
(Optional)
6. AC output terminal
7. LCD display
8. Indicator lights
9. Button
Anti Reverse Current Module
1
2
3 4
5
6
Figure 3.2.1-2
Figure
3.3
.
2-2
Figure
3.3
.
2-1
250mm
125mm
265mm
120mm
120mm
125mm
250mm
130mm
260mm
Figure
3.3
.
2-3
POWER
RUN
FAULT
9
7
8
POWER
RUN
FAULT
POWER
RUN
FAULT
POW
ER
RUN
FAULT