Jcb AG2200 Safety And Operating Manual - 1. Spindle Lock Button

SO53 3LE

Customer Helpline 0845 600 5526 

touch until they have cooled.

1. sPINDLE LOCK ButtON 

Clean the grinder spindle and all 

parts to be mounted. For clamping 

and loosening the grinding tools, 

lock the grinder spindle (7) with the 

spindle lock button (4).

Actuate the spindle lock button (4) 

only when the grinder spindle is 

at a standstill!

2. GRINDING/CuttING DIsC

Pay attention to the dimensions 

of the grinding disc. the 

mounting hole diameter must fit 

the inner flange (6) without play. 

Do not use reducers or adapters.

When using a diamond cutting 

disc, take care that the direction-

of-rotation arrow on the diamond 

cutting disc and the direction of 

rotation of the machine (direction-of-

rotation arrow on the machine head) 

agree.

for mounting, see the Component 

list illustration page.

Screw on the outer flange (5) and 

tighten with the two-pin spanner (9). 

(See  2 )

3. ADJustABLE OutER 

fLANGE CLAMPING

The outer flange (5) should be 

adjusted to suit different disc 

thickness. For thinner cutting or 

diamond discs the raised part of 

the outer flange is fitted facing away 

from the disc (See  3 ). For thicker 

2

3