Jcb AG2200 Safety And Operating Manual - Operating

SO53 3LE

Customer Helpline 0845 600 5526 

SO53 3LE

Customer Helpline 0845 600 5526 

OPERAtING 

INstRuCtIONs

● Clamp the workpiece if it does 

not remain stationary due to its own 

weight.

● Do not strain the machine so 

heavily that it comes to a standstill.

● Grinding and cutting discs 

become very hot while working; do 

not touch until they have cooled.

● Remove the plug from the 

socket-outlet when not using the 

machine. With the plug inserted 

and mains voltage existing, the 

power tool still has low power 

consumption even when it switched 

off.

1. HAND GRIP AREAs

Always hold your angle grinder 

firmly with both hands when 

operating (See  6 ).

2. ROuGH GRINDING

The best roughing results are 

achieved when setting the machine 

at an angle of 30° to 40°. Move 

the machine back and forth with 

moderate pressure. In this manner, 

the workpiece will not become too 

hot, does not discolour and grooves 

are not formed.

warning! Never use a 

cutting disc for roughing.

3. CuttING

warning! For cutting metal, 

always work with the wheel 

6