Jcb AG2200 Safety And Operating Manual - Starting Operation

SO53 3LE

Customer Helpline 0845 600 5526 

stARtING OPERAtION

Your switch is locked off to prevent 

accidental starting. To switch on 

your tool, push the safety switch 

lever (B) forward and depress on/

off switch (A) fully. Now your tool is 

switched on. To switch off your tool, 

just release the On/Off switch.

If you wish to use the tool 

continuously, push the safety switch 

lever (B) forward and depress on/

off switch (A) fully, then push the 

safety switch lever (B) forward again 

and release the On/Off switch. Now 

your switch has been locked on for 

continuous use. To switch off your 

tool, simply depress On/Off switch 

fully, the safety On/Off switch will 

automatically release. (See  5 )

ACCIDENtAL 

REstARtING fEAtuRE.

The restarting protection feature 

prevents accidental restarting of the 

machine after an interruption in the 

power supply.

To restart the operation, switch the 

On/Off switch (A) to the Off position 

and start the machine again.

sOft stARt MOtOR 

Internal electronic components 

allow the motor speed to increase 

slowly, which reduces the “twisting” 

effect on your wrists due to the high 

power motor.

OPERAtION

5

B

A