1. DL manuals
  2. Jeep
  3. Automobile
  4. Grand Cherokee 2012
  5. Owner's Manual

Jeep Grand Cherokee 2012 Owner's Manual

Manual is about: Grand Cherokee 2012

Summary of Grand Cherokee 2012

  • Page 1

    Grand cherokee chrysler group llc o w n e r ’ s m a n u a l 2 0 12 g ra n d c h e ro k e e 12wk741-126-aa first edition printed in u.S.A. 2 0 1 2 907713 jeep cherokee om cover.Indd 1 3/10/11 1:09 pm.

  • Page 2

    Vehicles sold in canada with respect to any vehicles sold in canada, the name chrysler group llc shall be deemed to be deleted and the name chrysler canada inc. Used in substitution therefore. Driving and alcohol drunken driving is one of the most frequent causes of accidents. Your driving ability c...

  • Page 3

    Vehicles sold in canada with respect to any vehicles sold in canada, the name chrysler group llc shall be deemed to be deleted and the name chrysler canada inc. Used in substitution therefore. Driving and alcohol drunken driving is one of the most frequent causes of accidents. Your driving ability c...

  • Page 4

    Installation of radio transmitting equipment special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained personnel. The following must be obser...

  • Page 5: Table Of Contents

    Table of contents section page 1 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 things to know before starting your vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 3 understanding the featu...

  • Page 7: Introduction

    Introduction contents 䡵 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 䡵 rollover warning . . . . . . . . . . . . . . . . . . . . . . . 5 䡵 how to use this manual . . . . . . . . . . . . . . . . . . 6 䡵 warnings and cautions . . . . . . . . . . . . . . . . . . . 8 䡵 vehicle ide...

  • Page 8

    Introduction congratulations on selecting your new chrysler group llc vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This is a specialized utility vehicle. It can go places and perform tasks t...

  • Page 9

    Note: after reviewing the owner information, it should be stored in the vehicle for convenient referenc- ing and remain with the vehicle when sold. When it comes to service, remember that your authorized dealer knows your vehicle best, has factory-trained tech- nicians and genuine mopar 威 parts, and...

  • Page 10

    Failure to use the driver and passenger seat belts pro- vided is a major cause of severe or fatal injury. In fact, the u.S. Government notes that the universal use of existing seat belts could cut the highway death toll by 10,000 or more each year and could reduce disabling injuries by two million a...

  • Page 11

    1 introduction 7.

  • Page 12

    Warnings and cautions this owner’s manual contains warnings against op- erating procedures that could result in a collision or bodily injury. It also contains cautions against proce- dures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important info...

  • Page 13

    Note: it is illegal to remove or alter the vin. Vehicle modifications/alterations warning! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. Right front body vin location 1 introduct...

  • Page 15: Contents

    Things to know before starting your vehicle contents 䡵 a word about your keys . . . . . . . . . . . . . . . . . 14 ▫ wireless ignition node (win) . . . . . . . . . . . . 14 ▫ key fob . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 ▫ removing key fob from ignition . . . . . . . . . . 16 ▫ ...

  • Page 16

    ▫ using the panic alarm . . . . . . . . . . . . . . . . . 26 ▫ programming additional transmitters . . . . . . 26 ▫ transmitter battery replacement . . . . . . . . . . 26 ▫ general information . . . . . . . . . . . . . . . . . . . 29 䡵 remote starting system — if equipped . . . . . . . 29 ▫ how to u...

  • Page 17

    ▫ seat belt pretensioners . . . . . . . . . . . . . . . . . 61 ▫ supplemental active head restraints (ahr) . . 61 ▫ enhanced seat belt use reminder system (beltalert 威 ) . . . . . . . . . . . . . . . . . . . . . . . . . 65 ▫ seat belt lock out . . . . . . . . . . . . . . . . . . . . 66 ▫ seat belts ...

  • Page 18

    A word about your keys your vehicle uses a keyless ignition system. This system consists of a key fob with remote keyless entry (rke) transmitter and a wireless ignition node (win) with integral ignition switch. You can insert the key fob into the ignition switch with either side up. Keyless enter-n...

  • Page 19

    Key fob the key fob operates the ignition switch. Insert the square end of the key fob into the ignition switch located on the instrument panel and rotate to the desired posi- tion. It also contains the remote keyless entry (rke) transmitter and an emergency key, which stores in the rear of the key ...

  • Page 20

    To remove the emergency key, slide the mechanical latch at the top of the key fob sideways with your thumb and then pull the key out with your other hand. Note: you can insert the double-sided emergency key into the lock cylinders with either side up. Removing key fob from ignition place the shift l...

  • Page 21

    • the power window switches, radio, power sunroof (if equipped), and power outlets will remain active for up to 10 minutes after the ignition switch is turned to the off position. Opening either front door will cancel this feature. The time for this feature is programmable. Refer to “electronic vehi...

  • Page 22

    Warning! (continued) • do not leave the key fob in or near the vehicle, and do not leave keyless enter-n-go in the acc or on/run mode. A child could operate power win- dows, other controls, or move the vehicle. • do not leave children or animals inside parked vehicles in hot weather. Interior heat b...

  • Page 23

    Vehicle can be used to start and operate the vehicle. The system will shut the engine off in two seconds if an invalid key fob is used to start the engine. After turning the ignition switch to the on/run posi- tion, the vehicle security light will turn on for three seconds for a bulb check. If the l...

  • Page 24

    Caution! • always remove the key fobs from the vehicle and lock all doors when leaving the vehicle unat- tended. • with keyless enter-n-go, always remember to place the ignition in off. At the time of purchase, the original owner is provided with a four-digit personal identification number (pin). Ke...

  • Page 25

    Audio and visual signals, the horn will sound, the head- lights will turn on, park lamps and/or turn signals will flash repeatedly for three minutes. If the disturbance is still present (driver’s door, passenger door, other doors, ignition) after three minutes, the headlights, park lamps and/or turn...

  • Page 26

    Exterior zone (refer to ⬙ keyless enter-n-go ⬙ in ⬙ things to know before starting your vehicle ⬙ for further informa- tion). • press the lock button on the remote keyless entry (rke) transmitter. 3. If any doors are open, close them. To disarm the system the vehicle security alarm can be disarmed u...

  • Page 27

    • when the vehicle security alarm is armed, the interior power door lock switches will not unlock the doors. The vehicle security alarm is designed to protect your vehicle; however, you can create conditions where the system will give you a false alarm. If one of the previ- ously described arming se...

  • Page 28

    Note: • the front courtesy overhead console and door cour- tesy lights will turn on if the dimmer control is in the ⬙ dome on ⬙ position (extreme top position). • the illuminated entry system will not operate if the dimmer control is in the “dome defeat” position (extreme bottom position). Remote ke...

  • Page 29

    To unlock the doors press and release the unlock button on the rke transmitter once to unlock the driver’s door or twice to unlock all doors. The turn signal lamps will flash to acknowledge the unlock signal. The illuminated entry system will also turn on. Refer to “keyless enter-n-go” under “things...

  • Page 30

    To lock the doors press and release the lock button on the rke transmit- ter to lock all doors. The turn signal lamps will flash and the horn will chirp to acknowledge the signal. Refer to “keyless enter-n-go” under “things to know before starting your vehicle” for further information. Sound horn wi...

  • Page 31

    Note: • perchlorate material — special handling may apply. See www.Dtsc.Ca.Gov/hazardouswaste/perchlorate • do not touch the battery terminals that are on the back housing or the printed circuit board. 1. Remove the emergency key by sliding the mechanical latch at the top of the rke transmitter side...

  • Page 32

    2. Insert the tip of the emergency key or a #2 flat blade screwdriver into the slot and gently pry the two halves of the rke transmitter apart. Make sure not to damage the seal during removal. 3. Remove and replace the battery. When replacing the battery, match the + sign on the battery to the + sig...

  • Page 33

    4. To assemble the rke transmitter case, snap the two halves together. General information this device complies with part 15 of the fcc rules and rss 210 of industry canada. Operation is subject to the following conditions: • this device may not cause harmful interference. • this device must accept ...

  • Page 34

    How to use remote start all of the following conditions must be met before the engine will remote start: • shift lever in park • doors closed • hood closed • liftgate/flipper glass closed • hazard switch off • brake switch inactive (brake pedal not pressed) • ignition key removed from ignition switc...

  • Page 35

    • remote start aborted — door ajar • remote start aborted — hood ajar • remote start aborted — fuel low • remote start aborted — liftgate ajar • remote start disabled — start vehicle to reset the evic message stays active until the ignition is turned to the on/run position. To enter remote start mod...

  • Page 36

    To exit remote start mode without driving the vehicle press and release the remote start button one time or allow the engine to run for the entire 15 minute cycle. Note: to avoid unintentional shutdowns, the system will disable the one time press of the remote start button for two seconds after rece...

  • Page 37

    Remote start is activated. These features will stay on through the duration of remote start or until the ignition switch is turned to the on/run position. The remote start comfort system can be activated and deactivated through the electronic vehicle information center (evic). For more information o...

  • Page 38

    Warning! • for personal security and safety in the event of an accident, lock the vehicle doors when you drive, as well as when you park and leave the vehicle. • when leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. • never leave children alone in a vehicle, or...

  • Page 39

    If the lock knob is down when the door is closed, the door will lock. Therefore, make sure the key fob is not inside the vehicle before closing the door. If you press the door lock switch while the key fob is in the ignition switch and the driver’s door is open, the doors will not lock. If a rear do...

  • Page 40

    3. Repeat steps 1 and 2 for the opposite rear door. Child-protection door lock location child-protection door lock function 36 things to know before starting your vehicle.

  • Page 41

    Warning! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child-protection locks are engaged (locked). Note: for emergency exit from the rear seats when the child-protection door lock system is engaged, manually raise the do...

  • Page 42

    Door handle to unlock the driver’s door automatically. The interior door panel lock knob will raise when the door is unlocked. Note: if “unlock all doors 1st press” is programmed all doors will unlock when you grab hold of the driver’s front door handle. To select between “unlock driver door 1st pre...

  • Page 43

    Passive entry system is equipped with an automatic door unlock feature which will function if there is no key fob present in the ignition. If one of the vehicle doors is open and the door panel switch is used to lock the vehicle, once all open doors have been closed the vehicle checks the inside and...

  • Page 44

    Note: if “unlock all doors 1st press” is programmed in evic, all doors will unlock when you push the button on the liftgate. If ⬙ unlock driver door 1st press ⬙ is programmed in evic, the liftgate and flipper glass will unlock when you press the button on the liftgate for further information, refer ...

  • Page 45

    Note: • after pressing the door handle lock button, you must wait two seconds before you can lock or unlock the doors, using either passive entry door handle. This is done to allow you to check if the vehicle is locked by pulling the door handle, without the vehicle reacting and unlocking. • the pas...

  • Page 46

    Warning! Never leave children in a vehicle with the key in the ignition switch or leave a vehicle with keyless enter- n-go in the acc or on/run position. Occupants, particularly unattended children, can become en- trapped by the windows while operating the power window switches. Such entrapment may ...

  • Page 47

    During auto up. If this happens, pull the switch lightly to the first detent and hold it to close the window manually. Warning! There is no anti-pinch protection when the window is almost closed. Be sure to clear all objects from the window before closing. Resetting the auto up feature should the au...

  • Page 48

    Wind buffeting wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions. This is a normal occur- rence and ...

  • Page 49

    Liftgate flipper glass the liftgate flipper glass is also unlocked when the liftgate is unlocked. To open the flipper glass, push up on the window switch located on the liftgate. Note: the liftgate flipper glass will not open if the liftgate is ajar. Once the liftgate flipper glass has been opened, ...

  • Page 50

    Power liftgate — if equipped the power liftgate may be opened by pulling up on the liftgate handle or by pressing the liftgate button on the remote keyless entry (rke) transmitter. Press the liftgate button on the rke transmitter twice within five seconds, to open the power liftgate. Once the liftga...

  • Page 51

    Warning! During power operation, personal injury or cargo damage may occur. Ensure the liftgate travel path is clear. Make sure the liftgate is closed and latched before driving away. Note: • the power liftgate will not operate if the liftgate flipper glass is open. • the power liftgate buttons will...

  • Page 52

    • if the liftgate handle is pulled while the power liftgate is opening, the liftgate motor will disengage to allow manual operation. • if the power liftgate encounters multiple obstructions within the same cycle, the system will automatically stop and the liftgate must be opened or closed manu- ally...

  • Page 53

    Occupant restraints some of the most important safety features in your vehicle are the restraint systems: • three-point lap and shoulder belts for the driver and all passengers • advanced front air bags for driver and front passen- ger • supplemental active head restraints (ahr) located on top of th...

  • Page 54

    If you will be carrying children too small for adult-sized seat belts, the seat belts or the lower anchors and tether for children (latch) feature also can be used to hold infant and child restraint systems. For more information on latch, refer to lower anchors and tether for children (latch). Note:...

  • Page 55

    If a child from 1 to 12 years old (not in a rear facing child seat) must ride in the front passenger seat, move the seat as far back as possible and use the proper child restraint. (refer to “child restraints”) you should read the instructions provided with your child restraint to make sure that you...

  • Page 56

    Warning! (continued) • being too close to the steering wheel or instrument panel during advanced front air bag deployment could cause serious injury, including death. Air bags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel. • supplemen...

  • Page 57

    Collision the belt will lock and reduce the risk of you striking the inside of the vehicle or being thrown out. Warning! • wearing a seat belt incorrectly is dangerous. Seat belts are designed to go around the large bones of your body. These are the strongest parts of your body and can take the forc...

  • Page 58

    Lap/shoulder belt operating instructions 1. Enter the vehicle and close the door. Sit back and adjust the seat. 2. The seat belt latch plate is above the back of your seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to make the belt go aroun...

  • Page 59

    3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” warning! • a belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your bel...

  • Page 60

    Warning! (continued) • a belt that is worn under your arm is dangerous. Your body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury. A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones. Wear the belt over your s...

  • Page 61

    5. Position the shoulder belt on your chest so that it is comfortable and not resting on your neck. The retractor will withdraw any slack in the belt. 6. To release the belt, push the red button on the buckle. The belt will automatically retract to its stowed position. If necessary, slide the latch ...

  • Page 62

    Lap/shoulder belt untwisting procedure use the following procedure to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180 degrees to create a fold ...

  • Page 63

    Button, verify the shoulder belt anchorage is latched by pulling downward on the shoulder belt anchorage until it is locked into position. Note: the adjustable upper shoulder belt anchorage is equipped with an easy up feature. This feature allows the shoulder belt anchorage to be adjusted in the upw...

  • Page 64

    Automatic locking retractor mode (alr) — if equipped in this mode, the shoulder belt is automatically pre- locked. The belt will still retract to remove any slack in the shoulder belt. The automatic locking mode is avail- able on all passenger-seating positions with a combina- tion lap/shoulder belt...

  • Page 65

    Energy management feature this vehicle has a safety belt system with an energy management feature in the front seating positions to help further reduce the risk of injury in the event of a head-on accident. This safety belt system has a retractor assembly that is designed to release webbing in a con...

  • Page 66

    How the active head restraints (ahr) work the occupant restraint controller (orc) determines whether the severity, or type of rear impact will require the active head restraints (ahr) to deploy. If a rear impact requires deployment, both the driver and front passenger seat ahrs will be deployed. Whe...

  • Page 67

    Caution! All occupants, including the driver, should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision. Note: for more information on properly adjusting and positi...

  • Page 68

    2. Position the hands on the top of the deployed ahr at a comfortable position. 3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. 4. The ahr front soft foam and trim half should lock into the back decorative plastic half. 1 — downward movement 2 — ...

  • Page 69

    Note: • if you have difficulties or problems resetting the active head restraints, see an authorized dealer. • for safety reasons, have the active head restraints checked by a qualified specialist at an authorized dealer. Enhanced seat belt use reminder system (beltalert 姞 ) beltalert 威 is a feature...

  • Page 70

    Unbuckled while traveling at speeds greater than 5 mph (8 km/h), beltalert 威 will provide both audio and visual notification. The front passenger seat beltalert 威 is not active when the front passenger seat is unoccupied. Beltalert 威 may be triggered when an animal or heavy object is on the front pa...

  • Page 71

    Extender should be used only if the existing belt is not long enough. When it is not required, remove the ex- tender and store it. Warning! Using a seat belt extender when not needed can increase the risk of injury in a collision. Only use when the lap belt is not long enough when it is worn low and...

  • Page 72

    The advanced front air bags have a multistage inflator design. This allows the air bag to have different rates of inflation based on the severity and type of collision. This vehicle may be equipped with driver and/or front passenger seat track position sensors that may adjust the inflation rate of t...

  • Page 73

    • instrument panel • knee impact bolster • driver advanced front air bag • passenger advanced front air bag • supplemental seat-mounted side air bags (sab) • supplemental side air bag inflatable curtains (sabic) • front and side impact sensors • front seat belt pretensioners, seat belt buckle switch...

  • Page 74

    Warning! (continued) • do not put anything on or around the air bag covers or attempt to open them manually. You may damage the air bags and you could be injured because the air bags may no longer be functional. The protective covers for the air bag cushions are designed to open only when the air ba...

  • Page 75

    Supplemental side air bag inflatable curtain (sabic) sabic air bags may offer side-impact and vehicle roll- over protection to front and rear seat outboard occupants in addition to that provided by the body structure. Each air bag features inflated chambers placed adjacent to the head of each outboa...

  • Page 76

    Note: • air bag covers may not be obvious in the interior trim, but they will open during air bag deployment. • being too close to the sab and sabic air bags during deployment could cause you to be severely injured or killed. • should a vehicle rollover occur, the pretensioners and/or sab and sabic ...

  • Page 77

    Warning! (continued) • your vehicle is equipped with sabic air bags, do not have any accessory items installed which will alter the roof, including adding a sunroof to your vehicle. Do not add roof racks that require perma- nent attachments (bolts or screws) for installation on the vehicle roof. Do ...

  • Page 78

    Advanced front air bags are designed to provide addi- tional protection by supplementing the seat belts in certain frontal collisions depending on the severity and type of collision. Advanced front air bags are not expected to reduce the risk of injury in rear, side, or rollover collisions. The adva...

  • Page 79

    Also, the orc turns on the air bag warning light in the instrument panel for approxi- mately four to eight seconds for a self-check when the ignition is first turned on. After the self-check, the air bag warning light will turn off. If the orc detects a malfunction in any part of the system, it turn...

  • Page 80

    Are possible, based on the collision type and severity. The steering wheel hub trim cover and the upper right side of the instrument panel separate and fold out of the way as the air bags inflate to their full size. The air bags fully inflate in about 50 to 70 milliseconds. This is about half of the...

  • Page 81

    A quantity of non-toxic gas is generated to inflate the sabic. The inflating sabic pushes the outside edge of the headliner out of the way and covers the window. The sabic inflates in about 30 milliseconds (about one- quarter of the time that it takes to blink your eyes) with enough force to injure ...

  • Page 82

    • unlock the doors automatically. If a deployment occurs the advanced front air bags are designed to deflate immediately after deployment. Note: front and/or side air bags will not deploy in all collisions. This does not mean something is wrong with the air bag system. If you do have a collision whi...

  • Page 83

    Warning! Deployed air bags and seat belt pretensioners cannot protect you in another collision. Have the air bags, seat belt pretensioners, and the front seat belt retrac- tor assemblies replaced by an authorized dealer im- mediately. Also, have the occupant restraint con- troller (orc) system servi...

  • Page 84

    Warning! (continued) • do not attempt to modify any part of your air bag system. The air bag may inflate accidentally or may not function properly if modifications are made. Take your vehicle to an authorized dealer for any air bag system service. If your seat, includ- ing your trim cover and cushio...

  • Page 85

    Note: if the speedometer, tachometer, or any engine related gauges are not working, the occupant restraint controller (orc) may also be disabled. The air bags may not be ready to inflate for your protection. Promptly check the fuse block for blown fuses. Refer to the label located on the inside of t...

  • Page 86

    To read data recorded by an edr, special equipment is required, and access to the vehicle or the edr is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equip- ment, can read the information if they have access to the vehicle or the edr. ...

  • Page 87

    Facing child safety seat. Two types of child restraints can be used rearward-facing: infant carriers and convertible child seats. The infant carrier is only used rearward-facing in the vehicle. It is recommended for children from birth until they reach the weight or height limit of the infant carrie...

  • Page 88

    Here are some tips for getting the most out of your child restraint: • before buying any restraint system, make sure that it has a label certifying that it meets all applicable safety standards. Chrysler group llc also recommends that you try a child restraint in the vehicle seats where you will use...

  • Page 89

    Note: for additional information, refer to www.Seatcheck.Org or call 1–866–seatcheck. Canadian residents should refer to transport canada’s website for additional information: http://www.Tc.Gc.Ca/ roadsafety/safedrivers/childsafety/index.Htm older children and child restraints children who are two y...

  • Page 90

    • check belt fit periodically. A child’s squirming or slouching can move the belt out of position. • if the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle. Never allow a child to put the shoulder belt under an arm or behind the back. Lower anchors and tet...

  • Page 91

    Note: when using the latch attaching system to install a child restraint, please ensure that all seat belts not being used for occupant restraints are stowed and out of reach of children. Remind all children in the vehicle that the seat belts are not toys and should not be played with, and never lea...

  • Page 92

    Installing the latch-compatible child restraint system we urge you to carefully follow the directions of the manufacturer when installing your child restraint. Not all child restraint systems will be installed as described here. Again, carefully follow the installation instructions that were provide...

  • Page 93

    In addition, there are top tether strap anchorages behind each rear seating position located on the back of the seat. To access the top tether strap anchorages behind the rear seat, pull the carpeted floor panel away from the seat back, this will expose the top tether strap anchorages. Warning! Do n...

  • Page 94

    Many, but not all, restraint systems will be equipped with separate straps on each side, with each having a hook or connector for attachment to the lower anchorage and a means of adjusting the tension in the strap. Forward- facing toddler restraints and some rear-facing infant restraints will also b...

  • Page 95

    Installing child restraints using the vehicle seat belts the seat belts in the passenger seating positions are equipped with an automatic locking retractor (alr) to secure a child restraint system (crs). These types of seat belts are designed to keep the lap portion of the seat belt tight around the...

  • Page 96

    To attach a child restraint tether strap: for rearward facing infant seats secured in the center seat position with the vehicle seat belts, the rear center seat position has an armrest tether that secures the arm rest in the upward position. To access the center seat arm rest tether first lower the ...

  • Page 97

    For center seating position route the tether strap over the seatback and headrest then attach the hook to the tether anchor located on the back of the seat. For the outboard seating positions, route the tether under the head re- straints, and attach the hook to the top tether anchor located on the b...

  • Page 98

    Top tether strap anchorage (located on seatback) top tether strap mounting 94 things to know before starting your vehicle.

  • Page 99

    Warning! • an incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly be- hind the child seat to secure a child restraint top tether strap. • do not use the cargo tie downs located on the load floor. Improper usag...

  • Page 100

    While cruising, brief full-throttle acceleration within the limits of local traffic laws contributes to a good break-in. Wide-open throttle acceleration in low gear can be detri- mental and should be avoided. The engine oil installed in the engine at the factory is a high-quality energy conserving t...

  • Page 101

    Warning! (continued) • do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • be sure everyone in your vehicle is in a seat and using a seat belt properly. Exhaust gas warning! Exhaust gases can injure or kill. They contain carbon monoxide (co), whi...

  • Page 102

    Whenever a change is noticed in the sound of the exhaust system, when exhaust fumes can be detected inside the vehicle, or when the underside or rear of the vehicle is damaged, have a competent mechanic inspect the com- plete exhaust system and adjacent body areas for broken, damaged, deteriorated, ...

  • Page 103

    Floor mat safety information always use floor mats designed to fit the footwell of your vehicle. Use only floor mats that leave the pedal area unobstructed and that are firmly secured so that they cannot slip out of position and interfere with the pedals or impair safe operation of your vehicle in o...

  • Page 104

    Warning! (continued) • always make sure that objects cannot fall into the driver footwell while the vehicle is moving. Ob- jects can become trapped under the brake pedal and accelerator pedal causing a loss of vehicle control. • if required, mounting posts must be properly installed, if not equipped...

  • Page 105: Contents

    Understanding the features of your vehicle contents 䡵 mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 ▫ inside day/night mirror . . . . . . . . . . . . . . . 108 ▫ automatic dimming mirror — if equipped . . 108 ▫ outside mirrors . . . . . . . . . . . . . . . . . . . . . 109 ▫ o...

  • Page 106

    ▫ phone call features . . . . . . . . . . . . . . . . . . 130 ▫ uconnect™ phone features . . . . . . . . . . . . . 133 ▫ advanced phone connectivity . . . . . . . . . . . 138 ▫ things you should know about your uconnect™ phone . . . . . . . . . . . . . . . . . . . . 140 ▫ general information . . . ....

  • Page 107

    ▫ setting memory positions and linking remote keyless entry transmitter to memory . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 ▫ memory position recall . . . . . . . . . . . . . . . . 176 ▫ to disable a rke transmitter linked to memory . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 108

    ▫ flash-to-pass . . . . . . . . . . . . . . . . . . . . . . . 188 ▫ high/low beam switch . . . . . . . . . . . . . . . 189 䡵 windshield wipers and washers . . . . . . . . . . 189 ▫ windshield wiper operation . . . . . . . . . . . . 190 ▫ intermittent wiper system . . . . . . . . . . . . . . 190 ▫ wi...

  • Page 109

    ▫ to turn off . . . . . . . . . . . . . . . . . . . . . . . . 208 ▫ to resume speed . . . . . . . . . . . . . . . . . . . . 208 ▫ to vary the speed setting . . . . . . . . . . . . . . 209 ▫ setting the following distance in acc . . . . 210 ▫ adaptive cruise control (acc) menu . . . . . 213 ▫ display...

  • Page 110

    ▫ sunglass bin door . . . . . . . . . . . . . . . . . . . 241 䡵 garage door opener — if equipped . . . . . . . . 242 ▫ before you begin programming homelink 威 . . 243 ▫ programming a rolling code . . . . . . . . . . . 244 ▫ programming a non-rolling code . . . . . . . . 246 ▫ canadian/gate operator ...

  • Page 111

    ▫ opening power shade — express . . . . . . . . . 256 ▫ opening power shade — manual mode . . . . 256 ▫ closing power shade — express . . . . . . . . . 256 ▫ closing power shade — manual mode . . . . . 256 ▫ pinch protect feature . . . . . . . . . . . . . . . . . 257 ▫ pinch protect override . . . ....

  • Page 112

    Mirrors inside day/night mirror a two-point pivot system allows for horizontal and vertical adjustment of the mirror. Adjust the mirror to center on the view through the rear window. The mirror should be adjusted while set in the day position (toward the windshield). Headlight glare can be reduced b...

  • Page 113

    In the button will illuminate to indicate when the dim- ming feature is activated. The mirror is twisted on the windshield button counterclockwise and requires no tools for mounting. Note: this feature is disabled when the vehicle is moving in reverse. Caution! To avoid damage to the mirror during c...

  • Page 114

    Warning! Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side convex mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or...

  • Page 115

    Power mirror preselected positions can be controlled by the optional memory seat feature. Refer to “driver memory seat” in “understanding the features of your vehicle” for further information. Heated mirrors — if equipped these mirrors are heated to melt frost or ice. This feature is activated whene...

  • Page 116

    Note: the tilt mirrors in reverse feature is not en- abled when delivered from the factory. The tilt mirrors in reverse feature can be enabled or disabled in the elec- tronic vehicle information center (evic). Refer to “elec- tronic vehicle information center (evic)/customer- programmable features” ...

  • Page 117

    Blind spot monitoring — if equipped the blind spot monitoring (bsm) system uses two radar- based sensors, located inside the rear bumper fascia, to detect highway licensable vehicles (automobiles, trucks, motorcycles, etc.) that enter the blind spot zones from the rear/front/side of the vehicle. Whe...

  • Page 118

    • the bsm system detection zone does not change if your vehicle is towing a trailer. Therefore, visually verify the adjacent lane is clear for both your vehicle and trailer before making a lane change. If the trailer or other object (i.E., bicycle, sports equipment) extends beyond the side of your v...

  • Page 119

    The bsm system monitors the detection zone from three different entry points (side, rear, front) while driving to see if an alert is necessary. The bsm system will issue an alert during these types of zone entries. Entering from the side vehicles that move into your adjacent lanes from either side o...

  • Page 120

    Entering from the rear vehicles that come up from behind your vehicle on either side and enter the rear detection zone with a relative speed of less than 30 mph (48 km/h). Overtaking traffic if you pass another vehicle slowly (with a relative speed less than 10 mph (16 km/h) and the vehicle remains ...

  • Page 121

    The bsm system is designed not to issue an alert on stationary objects such as guardrails, posts, walls, foliage, berms, etc. However, occasionally the system may alert on such objects. This is normal operation and your vehicle does not require service. Overtaking/passing stationary objects 3 unders...

  • Page 122

    The bsm system will not alert you of objects that are traveling in the opposite direction of the vehicle in adjacent lanes. Warning! The blind spot monitoring system is only an aid to help detect objects in the blind spot zones. The bsm system is not designed to detect pedestrians, bicy- clists, or ...

  • Page 123

    Rcp monitors the rear detection zones on both sides of the vehicle, for objects that are moving toward the side of the vehicle with a minimum speed of approximately 1 to 2 mph (1 km/h to 3 km/h), to objects moving a maxi- mum of approximately 10 mph (16 km/h), such as in parking lot situations. Note...

  • Page 124

    Modes of operation three selectable modes of operation are available in the electronic vehicle information center (evic). Refer to “electronic vehicle information center (evic)/personal settings (customer-programmable features)” in “under- standing your instrument panel” for further information. Bli...

  • Page 125

    Blind spot alert off when the bsm system is turned off there will be no visual or audible alerts from either the bsm or rcp systems. Note: the bsm system will store the current operating mode when the vehicle is shut off. Each time the vehicle is started the previously stored mode will be recalled a...

  • Page 126

    Uconnect™ phone allows you to transfer calls between the system and your mobile phone as you enter or exit your vehicle and enables you to mute the system’s microphone for private conversation. The uconnect™ phone is driven through your bluetooth 威 “hands-free profile” mobile phone. Uconnect™ featur...

  • Page 127

    Voice command button actual button location may vary with the ra- dio. The individual buttons are described in the “operation” section. The uconnect™ phone can be used with any hands-free profile certified bluetooth 威 mobile phone. See the uconnect™ website for supported phones. Refer to your mobile...

  • Page 128

    Example, you can use the compound form voice command “phonebook new entry”, or you can break the compound form command into two voice com- mands: “phonebook” and “new entry”. Please re- member, the uconnect™ phone works best when you talk in a normal conversational tone, as if speaking to someone si...

  • Page 129

    • when prompted, after the beep, say “pair a device” and follow the audible prompts. • you will be asked to say a four-digit personal identi- fication number (pin), which you will later need to enter into your mobile phone. You can enter any four-digit pin. You will not need to remember this pin aft...

  • Page 130

    • the uconnect™ phone will confirm the phone number and then dial. The number will appear in the display of certain radios. Call by saying a name • press the button to begin. • after the “ready” prompt and the following beep, say “call”. • the system will prompt you to say the name of the person you...

  • Page 131

    • when prompted, enter the number designation (e.G., “home”, “work”, “mobile”, or “other”). This will allow you to store multiple numbers for each phone- book entry, if desired. • when prompted, recite the phone number for the phonebook entry that you are adding. After you are finished adding an ent...

  • Page 132

    • depending on the maximum number of entries down- loaded, there may be a short delay before the latest downloaded names can be used. Until then, if avail- able, the previously downloaded phonebook is avail- able for use. • only the phonebook of the currently connected mobile phone is accessible. • ...

  • Page 133

    After you are finished editing an entry in the phonebook, you will be given the opportunity to edit another entry in the phonebook, call the number you just edited, or return to the main menu. “phonebook edit entry” can be used to add another phone number to a name entry that already exists in the p...

  • Page 134

    Delete/erase “all” uconnect™ phonebook entries • press the button to begin. • after the “ready” prompt and the following beep, say “phonebook erase all”. • the uconnect™ phone will ask you to verify that you wish to delete all the entries from the phonebook. • after confirmation, the phonebook entri...

  • Page 135

    Mobile service plan. For example, if your mobile service plan provides three-way calling, this feature can be accessed through the uconnect™ phone. Check with your mobile service provider for the features that you have. Answer or reject an incoming call — no call currently in progress when you recei...

  • Page 136

    Place/retrieve a call from hold to put a call on hold, press the button until you hear a single beep. This indicates that the call is on hold. To bring the call back from hold, press and hold the button until you hear a single beep. Toggling between calls if two calls are in progress (one active and...

  • Page 137

    • after the “ready” prompt and the following beep, say “redial”. • the uconnect™ phone will call the last number that was dialed from your mobile phone. Note: this may not be the last number dialed from the uconnect™ phone. Call continuation call continuation is the progression of a phone call on th...

  • Page 138

    After selecting one of the languages, all prompts and voice commands will be in that language. Note: after every uconnect™ phone language change operation, only the language-specific 32-name phone- book is usable. The paired phone name is not language- specific and is usable across all languages. Em...

  • Page 139

    Warning! To use your uconnect™ phone system in an emer- gency, your mobile phone must be: • turned on, • paired to the uconnect™ system, • and have network coverage. Towing assistance if you need towing assistance: • press the button to begin. • after the “ready” prompt and the following beep, say “...

  • Page 140

    Working with automated systems this method is used in instances where one generally has to press numbers on the mobile phone keypad while navigating through an automated telephone system. You can use your uconnect™ phone to access a voice mail system or an automated service, such as a paging service...

  • Page 141

    Barge in — overriding prompts the “voice command” button can be used when you wish to skip part of a prompt and issue your voice command immediately. For example, if a prompt is asking “would you like to pair a phone, clear a...,” you could press the button and say, “pair a phone” to select that opt...

  • Page 142

    Note: certain brands of mobile phones do not send the dial ring to the uconnect™ phone to play it on the vehicle audio system, so you will not hear it. Under this situa- tion, after successfully dialing a number the user may feel that the call did not go through even though the call is in progress. ...

  • Page 143

    If you would like to connect or disconnect the bluetooth 威 connection between your mobile phone and the uconnect™ phone system, follow the instructions de- scribed in your mobile phone user’s manual. List paired mobile phone names • press the button to begin. • after the “ready” prompt and the follo...

  • Page 144

    • after the “ready” prompt and the following beep, say “setup phone pairing”. • at the next prompt, say “delete” and follow the prompts. • you can also press the button at any time while the list is being played, and then choose the phone you wish to delete. Things you should know about your uconnec...

  • Page 145

    This procedure may be repeated with a new user. The system will adapt to the last trained voice only. Reset • press the button. • after the “ready” prompt, and the following beep, say “setup”, then “reset”. This will delete all phone pairing, phone book entries, and other settings in all language mo...

  • Page 146

    • when navigating through an automated system such as voice mail, or when sending a page, at the end of speaking the digit string, make sure to say “send”. • storing names in the phonebook when the vehicle is not in motion is recommended. • it is not recommended to store similar sounding names in th...

  • Page 147

    • echo at the phone far end can sometimes be reduced by lowering the in-vehicle audio volume. • in a convertible vehicle, system performance may be compromised with the convertible top down. Recent calls if your phone supports “automatic phonebook down- load”, uconnect™ phone can list your outgoing,...

  • Page 148

    To send a message, press the button while the system is listing the message and say “send.” uconnect™ phone will prompt you to say the name or number of the person you wish to send the message to. List of preset messages: 1. Yes 2. No 3. Where are you? 4. I need more direction. 5. L o l 6. Why 7. I ...

  • Page 149

    Turn sms incoming announcement on/off turning the sms incoming announcement off will stop the system from announcing the new incoming mes- sages. • press the button. • after the “ready” prompt and the following beep, say “setup, sms incoming message announcement,” you will then be given a choice to ...

  • Page 150

    146 understanding the features of your vehicle.

  • Page 151

    3 understanding the features of your vehicle 147.

  • Page 152

    148 understanding the features of your vehicle.

  • Page 153

    Voice commands primary alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all voice commands primary alternate(s) call cancel confirmation prompts continue delete dial download edit emergency english erase all espanol francais help home 3 understa...

  • Page 154

    Voice commands primary alternate(s) language list names list phones mobile mute mute off new entry no other pair a phone phone pairing pairing phonebook phone book previous record again redial voice commands primary alternate(s) return to main menu return or main menu select phone select send set up...

  • Page 155

    General information this device complies with part 15 of the fcc rules and rss 210 of industry canada. Operation is subject to the following conditions: • changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment....

  • Page 156

    Note: if you do not say a command within a few seconds, the system will present you with a list of options. If you ever wish to interrupt the system while it lists options, press the voice command button, listen for the beep, and say your command. Pressing the voice command button while the system i...

  • Page 157

    Changing the volume 1. Start a dialogue by pressing the voice command button. 2. Say a command (e.G., “help”). 3. Use the on/off volume rotary knob to adjust the volume to a comfortable level while the voice command system is speaking. Please note the volume setting for voice command is different th...

  • Page 158

    • “next station” (to select the next station) • “previous station” (to select the previous station) • “menu radio” (to switch to the radio menu) • “main menu” (to switch to the main menu) satellite radio to switch to satellite radio mode, say “sat” or “satellite radio”. In this mode, you may say the...

  • Page 159

    • “new memo” (to record a new memo) — during the recording, you may press the voice command button to stop recording. You proceed by saying one of the following commands: − “save” (to save the memo) − “continue” (to continue recording) − “delete” (to delete the recording) • “play memos” (to play pre...

  • Page 160

    • “voice training” note: keep in mind that you have to press the voice command button first and wait for the beep before speaking the “barge in” commands. Voice training for users experiencing difficulty with the system recog- nizing their voice commands or numbers the uconnect™ voice “voice trainin...

  • Page 161

    Power seats — if equipped some models may be equipped with eight-way power driver and front passenger seats. The power seat switches are located on the outboard side of the seat. There are two switches that control the movement of the seat cushion and the seatback. Power seat switches 1 — seatback s...

  • Page 162

    Adjusting the seat forward or rearward the seat can be adjusted both forward and rearward. Push the seat switch forward or rearward, the seat will move in the direction of the switch. Release the switch when the desired position has been reached. Adjusting the seat up or down the height of the seats...

  • Page 163

    Warning! (continued) • do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death. Caution! Do not place any article under a power seat or impede its abili...

  • Page 164

    Warning! • adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could...

  • Page 165

    Manual front seats forward/rearward adjustment some models may be equipped with manual front driver or passenger seats. The seats can be adjusted forward or rearward by using a bar located by the front of the seat cushion, near the floor. While sitting in the seat, lift up on the bar located under t...

  • Page 166

    Warning! • adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could...

  • Page 167

    Front passenger seat fold-flat feature — if equipped to fold the seatback to the flat load-floor position, lift the recline lever and push the seatback forward. To return to the seating position, raise the seatback and lock it into place. Heated seats — if equipped on some models, the front and rear...

  • Page 168

    Warning! (continued) • do not place anything on the seat that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat. Sitting in a seat that has been overheated could cause serious burns due to the increased surface temperature of the seat. Vehicles equipped...

  • Page 169

    The system will automatically switch to low-level after a maximum of 50 minutes of continuous operation. At that time, the number of illuminated leds changes from two to one, indicating the change. The low-level setting will turn off automatically after a maximum of 45 minutes. Rear heated seats on ...

  • Page 170

    Press the switch once to select high-level heating. Press the switch a second time to select low-level heating. Press the switch a third time to shut the heating elements off. Note: once a heat setting is selected, heat will be felt within two to five minutes. When the high-level setting is selected...

  • Page 171

    Note: the engine must be running for the ventilated seats to operate. Vehicles equipped with remote start on models that are equipped with remote start, the driver’s ventilated seat can be programmed to come on during a remote start. Refer to “remote starting system — if equipped” in “things to know...

  • Page 172

    When ahrs deploy during a rear impact, the front half of the head restraint extends forward to minimize the gap between the back of the occupant’s head and the ahr. This system is designed to help prevent or reduce the extent of injuries to the driver and front passenger in certain types of rear imp...

  • Page 173

    For comfort the active head restraints can be tilted forward and rearward. To tilt the head restraint closer to the back of your head, pull forward on the bottom of the head restraint. Push rearward on the bottom of the head restraint to move the head restraint away from your head. Active head restr...

  • Page 174

    Note: • the head restraints should only be removed by quali- fied technicians, for service purposes only. If either of the head restraints require removal, see your autho- rized dealer. • in the event of deployment of an active head re- straint, refer to “occupant restraints/resetting active head re...

  • Page 175

    The center head restraint has limited adjustment. Lift upward on the head restraint to raise it, or push down- ward on the head restraint to lower it. Warning! Sitting in a seat with the head restraint in its lowered position could result in serious injury or death in a collision. Always make sure t...

  • Page 176

    Note: be sure that the front seats are fully upright and positioned forward. This will allow the rear seatback to fold down easily. 1. Pull upward on the release lever to release the seat. Note: • do not fold the 60% rear seat down with the left outboard or rear center seat belt buckled. • do not fo...

  • Page 177

    To raise rear seat raise the rear seatback and lock it into place. If interfer- ence from the cargo area prevents the seatback from fully locking, you will have difficulty returning the seat to its proper position. Warning! • be certain that the seatback is securely locked into position. If the seat...

  • Page 178

    Reclining rear seat to recline the seatback, lift the lever located on the outboard side of the seat, lean back and release the lever at the desired position. To return the seatback, lift the lever, lean forward and release the lever. Warning! Do not ride with the seatback reclined so that the shoul...

  • Page 179

    Your vehicle is equipped with two rke transmitters. One or both rke transmitters can be linked to either memory position. The memory system can accommodate up to four rke transmitters, each one linked to either of the two memory positions. Setting memory positions and linking remote keyless entry tr...

  • Page 180

    5. Turn on the radio and set the radio station presets (up to 12 am and 12 fm stations can be set). 6. Turn the ignition switch to the lock/off position and remove the key. 7. Press and release the s (set) button located on the driver’s door. 8. Within five seconds, press and release memory button 1...

  • Page 181

    To recall the memory setting for driver two, press memory button number 2 on the driver’s door, or the unlock button on the rke transmitter linked to memory position 2. A recall can be cancelled by pressing any of the memory buttons on the drivers door during a recall (s, 1, or 2). When a recall is ...

  • Page 182

    Easy entry/exit seat this feature provides automatic driver’s seat positioning which will enhance driver mobility out of and into the vehicle. There are two possible easy entry/exit adjustments available: • the seat cushion will move rearward approximately 2.5 in (60 mm), if the starting position of...

  • Page 183

    To open and close the hood to open the hood, two latches must be released. 1. Pull the release lever located below the instrument panel and in front of the driver’s door. 2. Reach under the hood, move safety latch to the left and lift the hood. Caution! To prevent possible damage, do not slam the ho...

  • Page 184

    Warning! Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death. Lights headlight switch the headlight switch is located...

  • Page 185

    Note: • your vehicle is equipped with plastic headlight and fog light (if equipped) lenses that are lighter and less susceptible to stone breakage than glass lights. Plastic is not as scratch resistant as glass and therefore differ- ent lens cleaning procedures must be followed. • to minimize the po...

  • Page 186

    Information center (evic)/customer-programmable features” in “understanding your instrument panel” for further information. If your vehicle is equipped with a “rain sensitive wiper system” and it is activated, the headlights will automati- cally turn on after the wipers complete five wipe cycles wit...

  • Page 187

    Note: this system will not activate until the vehicle is at or above 20 mph (32 km/h). To deactivate 1. Pull the multifunction lever toward you (or rearward in car) to manually deactivate the system (normal opera- tion of low beams). 2. Push back on the multifunction lever once again to reactivate t...

  • Page 188

    On, and then the headlight switch is cycled off. Headlight delay can be cancelled by either turning the headlight switch on then off, or by turning the ignition on. The headlight delay time is programmable on vehicles equipped with an electronic vehicle information center (evic). Refer to “electroni...

  • Page 189

    Turn off when the switch is pushed a second time, when the headlight switch is rotated to the off position, or the high beam is selected. Interior lights courtesy and dome lights are turned on when the front doors are opened, when the dimmer control (rotating wheel on the right side of the headlight...

  • Page 190

    Lights-on reminder if the headlights, parking lights, or cargo lights are left on after the ignition is turned off, a chime will sound when the driver’s door is opened. Battery saver to protect the life of your vehicle’s battery, load shedding is provided for both the interior and exterior lights. I...

  • Page 191

    Each light can be turned on by pressing a switch on either side of the console. These buttons are backlit for night time visibility. To turn the lights off, press the switch a second time. The lights will also turn on when the unlock button on the remote keyless entry (rke) is pressed. Ambient light...

  • Page 192

    Multifunction lever the multifunction lever is located on the left side of the steering column. Turn signals move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights. Note: if either light re...

  • Page 193

    High/low beam switch push the multifunction lever toward the instrument panel to switch the headlights to high beam. Pulling the multifunction back toward the steering wheel will turn the low beams back on, or shut the high beams off. Windshield wipers and washers the windshield wiper/washer control...

  • Page 194

    Windshield wiper operation rotate the end of the lever to one of the first four detent positions for intermittent settings, the fifth detent for low wiper operation and the sixth detent for high wiper operation. Caution! Always remove any buildup of snow that prevents the windshield wiper blades fro...

  • Page 195

    Note: if the vehicle is moving less than 10 mph (16 km/h), delay times will be doubled. Windshield washer operation to use the washer, push on the end of the lever (toward the steering wheel) and hold while spray is desired. If the lever is pushed while in the intermittent setting, the wipers will t...

  • Page 196

    Warning! Sudden loss of visibility through the windshield could lead to a collision. You might not see other vehicles or other obstacles. To avoid sudden icing of the windshield during freezing weather, warm the windshield with the defroster before and during windshield washer use. Mist use the mist...

  • Page 197

    From the windshield washers of the vehicle ahead. Rotate the end of the multifunction lever to one of four settings to activate this feature. The sensitivity of the system can be adjusted with the multifunction lever. Wiper delay position 1 is the least sensitive, and wiper delay position 4 is the m...

  • Page 198

    • transmission in neutral position — when the ignition is on, and the transmission is in the neu- tral position, the rain sensing system will not operate until the wiper switch is moved, vehicle speed is greater than 5 mph (8 km/h), or the shift lever is moved out of the neutral position. Tilt/teles...

  • Page 199

    To unlock the steering column, push the lever downward (toward the floor). To tilt the steering column, move the steering wheel upward or downward as desired. To lengthen or shorten the steering column, pull the steering wheel outward or push it inward as desired. To lock the steering column in posi...

  • Page 200

    To tilt the steering column, move the lever up or down as desired. To lengthen or shorten the steering column, pull the lever toward you or push the lever away from you as desired. Note: for vehicles equipped with driver memory seat, you can use your remote keyless entry (rke) transmitter or the mem...

  • Page 201

    The heated steering wheel switch is located on the switch bank below the climate controls. Press the switch to turn on the heated steering wheel. The light on the switch will illuminate to indicate the steering wheel heater is on. Pressing the switch a second time will turn off the heated steering w...

  • Page 202

    The electronic speed control buttons are located on the right side of the steering wheel. Note: in order to ensure proper operation, the elec- tronic speed control system has been designed to shut down if multiple speed control functions are operated at the same time. If this occurs, the electronic ...

  • Page 203

    To set a desired speed turn the electronic speed control on. When the vehicle has reached the desired speed, press the set (-) button and release. Release the accelerator and the vehicle will operate at the selected speed. Note: the vehicle should be traveling at a steady speed and on level ground b...

  • Page 204

    Decrease until the button is released. Release the button when the desired speed is reached, and the new set speed will be established. Pressing the set (-) button once will result in a 1 mph (1.6 km/h) decrease in set speed. Each subsequent tap of the button results in a decrease of 1 mph (1.6 km/h...

  • Page 205

    Acc will allow you to keep cruise control engaged in light to moderate traffic conditions without the constant need to reset your cruise control. Acc utilizes a radar sensor designed to detect a vehicle directly ahead of you. Note: • if the sensor does not detect a vehicle ahead of you, acc will mai...

  • Page 206

    Warning! (continued) − cannot take street, traffic, and weather conditions into account, and may be limited upon adverse sight distance conditions. − does not predict the lane curvature or the move- ment of preceding vehicles and will not compensate for such changes. − does not always fully recogniz...

  • Page 207

    The cruise control system has two control modes: • adaptive cruise control mode for maintaining an appropriate distance between vehicles. • normal (fixed speed) cruise control mode for cruising at a constant preset speed. For additional information, refer to “normal (fixed speed) cruise control mode...

  • Page 208

    Note: any chassis/suspension modifications to the vehicle will effect the performance of the adaptive cruise control. Activating adaptive cruise control (acc) you can only activate acc if the vehicle speed is above 20 mph (32 km/h). When the system is turned on and in the ready state, the electronic...

  • Page 209

    To activate push and release the on/off button. The acc menu in the evic displays “adaptive cruise ready.” to turn the system off, push and release the on/off button again. At this time, the system will turn off and the evic will display “adaptive cruise control off.” warning! Leaving the adaptive c...

  • Page 210

    To set a desired acc speed when the vehicle reaches the speed desired, push the set - button and release. The evic will display the set speed. Remove your foot from the accelerator pedal. If you do not, the vehicle may continue to accelerate beyond the set speed. If this occurs: • the message “drive...

  • Page 211

    To cancel the system will disable acc without erasing the memory if: • you softly tap the brake pedal. • you depress the brake pedal. • you press the cancel switch. • an anti-lock brake system (abs) event occurs. • a trailer sway control (tsc) event occurs. • if the transmission is shifted into neut...

  • Page 212

    Note: if acc is resumed or set with the esc/tcs off, esc will automatically be re-engaged. To turn off the system will turn off and erase the set speed in memory if: • you push the on/off button. • you turn off the ignition. • you switch to four-wheel drive low. To resume speed press the res + butto...

  • Page 213

    To vary the speed setting while acc is set, you can increase the set speed by pressing and holding the res + button. If the button is continually pressed, the set speed will continue to in- crease in 5 mph (8 km/h) increments until the button is released. The increase in set speed is reflected in th...

  • Page 214

    Setting the following distance in acc the specified following distance for acc can be set by varying the distance setting between 3 (long), 2 (me- dium), and 1 (short). Using this distance setting and the vehicle speed, acc calculates and sets the distance to the vehicle ahead. This distance setting...

  • Page 215

    To change the distance setting, press the distance button and release. Each time the button is pressed, the distance setting adjusts between long, medium, and short. If there is no vehicle ahead, the vehicle will maintain the set speed. If a slower moving vehicle is detected in the same lane, the ev...

  • Page 216

    The maximum braking applied by acc is limited; how- ever, the driver can always apply the brakes manually, if necessary. Note: the brake lights will illuminate whenever the acc system applies the brakes. A proximity warning will alert the driver if acc predicts that its maximum braking level is not ...

  • Page 217

    Adaptive cruise control (acc) menu the evic displays the current acc system settings. The evic is located in the upper part of the instrument cluster between the speedometer and the tachometer. The information it displays depends on acc system status. Press the menu button (located on the steer- ing...

  • Page 218

    The acc screen will display once again if any acc activity occurs, which may include any of the following: • set speed change • distance setting change • system cancel • driver override • system off • acc proximity warning • acc unavailable warning the evic will return to the last display selected a...

  • Page 219

    Note: if the acc “clean radar sensor in front of vehicle” warning is active normal (fixed speed) cruise control is still available. For additional information refer to “normal (fixed speed) cruise control mode” in this section. If weather conditions are not a factor, the driver should examine the se...

  • Page 220

    • do not attach or install any accessories near the sensor, including transparent material or aftermarket grilles. Doing so could cause an acc system failure or malfunction. When the condition that deactivated the system is no longer present, the system will return to the “adaptive cruise control of...

  • Page 221

    Note: do not change the adjustment fasteners or pull the sensor off of the bracket. Doing so may misalign the sensor. Store the sensor and bracket assembly in a safe location. The wiring and connector must be stowed properly after the sensor and bracket assembly is removed. A connector plug is stowe...

  • Page 222

    Service acc warning if the system turns off, and the evic displays “acc/ fcw unavailable service radar sensor”, it indicates there is an internal system fault. Although the vehicle is still drivable under normal conditions, have the system checked by an authorized dealer. Precautions while driving w...

  • Page 223

    Offset driving acc may not detect a vehicle in the same lane that is offset from your direct line of travel. There will not be sufficient distance to the vehicle ahead. The offset vehicle may move in and out of the line of travel, which can cause your vehicle to brake or accelerate unexpectedly. Tur...

  • Page 224

    Using acc on hills when driving on hills, acc may not detect a vehicle in your lane. Depending on the speed, vehicle load, traffic conditions, and the steepness of the hills, acc perfor- mance may be limited. Lane changing acc will not detect a vehicle until it is completely in the lane in which you...

  • Page 225

    Narrow vehicles some narrow vehicles traveling near the outer edges of the lane or edging into the lane are not detected until they have moved fully into the lane. There will not be suffi- cient distance to the vehicle ahead. Stationary objects and vehicles acc does not react to stationary objects a...

  • Page 226

    General information fcc requirements for vehicular radar systems classification specifications: 47 c.F.R. Part 15 47 c.F.R part 15.515 normal (fixed speed) cruise control mode in addition to adaptive cruise control mode, a normal (fixed speed) cruise control mode is available for cruis- ing at fixed...

  • Page 227

    To vary the speed setting there are two ways to change the set speed: • use the accelerator pedal to adjust the vehicle to the desired speed and press the set - button. • tap the res + or set - button to increase or decrease the set speed in 1 mph (1.6 km/h) increments respec- tively. Hold the res +...

  • Page 228

    Forward collision warning — if equipped forward collision warning (fcw) warns the driver of a potential collision with the vehicle in front of you and prompts the driver to take action in order to avoid the collision. Fcw monitors the information from the forward looking sensor as well as the electr...

  • Page 229

    Guard rails or sign posts based on the course predic- tion. This is expected and is a part of normal fcw activation and functionality. Warning! Forward collision warning (fcw) is not intended to avoid a collision on its own, nor can fcw detect every type of potential collision. The driver has the re...

  • Page 230

    Changing the fcw status to the “near” setting, allows the system to warn you of a possible collision with the vehicle in front of you when you are much closer. This setting provides less reaction time than the “far” setting, which allows for a more dynamic driving experience. Changing the fcw status...

  • Page 231

    Note: in the “off” setting fcw off will be displayed in the evic. Note: • the system will retain the last setting selected by the driver after ignition shut down. • fcw will not react to irrelevant objects such as over- head objects, ground reflections, objects not in the path of the car, stationary...

  • Page 232

    Service fcw warning if the system turns off, and the evic displays “acc/ fcw unavailable service radar sensor”, it indicates there is an internal system fault. Although the vehicle is still drivable under normal conditions, have the system checked by an authorized dealer. Parksense 姞 rear park assis...

  • Page 233

    Parksense 姞 sensors the four parksense 威 sensors, located in the rear fascia/ bumper, monitor the area behind the vehicle that is within the sensors’ field of view. The sensors can detect obstacles from approximately 12 in (30 cm) up to 79 in (200 cm) from the rear fascia/bumper in the horizontal di...

  • Page 234

    Parksense 姞 display when the vehicle is in reverse, the warning display will turn on indicating the system status. Park assist system on park assist system off 230 understanding the features of your vehicle.

  • Page 235

    The system will indicate a detected obstacle by showing three solid arcs and will produce a one-half second tone. As the vehicle moves closer to the object the evic display will show fewer arcs and the sound tone will change from slow, to fast, to continuous. Slow tone fast tone 3 understanding the ...

  • Page 236

    The vehicle is close to the obstacle when the evic display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle: continuous tone 232 understanding the features of your vehicle.

  • Page 237

    Warning alerts rear distance (in/cm) greater than 79 in (200 cm) 79-39 in (200-100 cm) 39-25 in (100-65 cm) 25-12 in (65-30 cm) less than 12 in (30 cm) audible alert chime none single 1/2 second tone slow fast continuous display message park assist system on warning object detected warning object de...

  • Page 238

    Enabling and disabling parksense 姞 parksense 威 can be enabled and disabled with a switch located in the switch bank of the instrument panel or through the customer-programmable features section of the evic. The available choices are: off, sound only, or sound and display. Refer to “electronic vehicl...

  • Page 239

    If “clean park assist sensors” appears in the electronic vehicle information center (evic) make sure the rear fascia/bumper is clean and clear of snow, ice, mud, dirt or other obstruction and then cycle the ignition. If the message continues to appear see an authorized dealer. If “service park assis...

  • Page 240

    • parksense 威 , when on, will mute the radio when it is sounding a tone. • clean the parksense 威 sensors regularly, taking care not to scratch or damage them. The sensors must not be covered with ice, snow, slush, mud, dirt or debris. Failure to do so can result in the system not working properly. T...

  • Page 241

    Warning! • drivers must be careful when backing up even when using the parksense 威 rear park assist sys- tem. Always check carefully behind your vehicle, look behind you, and be sure to check for pedes- trians, animals, other vehicles, obstructions, and blind spots before backing up. You are respons...

  • Page 242

    Parkview 姞 rear back up camera — if equipped your vehicle may be equipped with the parkview 威 rear back up camera that allows you to see an on-screen image of the rear surroundings of your vehicle whenever the shift lever is put into reverse. The image will be displayed on the navigation/multimedia ...

  • Page 243

    Warning! Drivers must be careful when backing up even when using the parkview 威 rear back up camera. Always check carefully behind your vehicle, and be sure to check for pedestrians, animals, other vehicles, ob- structions, or blind spots before backing up. You are responsible for the safety of your...

  • Page 244

    4. Enable or disable the rear camera feature by selecting the “enable rear camera in reverse” soft-key. 5. Press the “save” soft-key. Turning parkview 姞 on or off — without navigation/multimedia radio 1. Press the “menu” hard-key. 2. Select “system setup” soft-key. 3. Enable or disable the rear came...

  • Page 245

    To turn the lights off, press the switch a second time. The lights also turn on when a door is opened. The lights will also turn on when the unlock button on the rke is pressed. Sunglass bin door at the front of the console a compartment is provided for the storage of a pair of sunglasses. The stora...

  • Page 246

    Garage door opener — if equipped homelink 威 replaces up to three hand-held transmitters that operate devices such as garage door openers, motor- ized gates, lighting or home security systems. The homelink 威 unit is powered by your vehicles 12 volt battery. The homelink 威 buttons, located on either t...

  • Page 247

    Note: homelink 威 is disabled when the vehicle secu- rity alarm is active. Before you begin programming homelink 姞 be sure that your vehicle is parked outside of the garage before you begin programming. For more efficient programming and accurate transmis- sion of the radio-frequency signal it is rec...

  • Page 248

    Programming a rolling code for programming garage door openers that were manu- factured after 1995. These garage door openers can be identified by the “learn” or “train” button located where the hanging antenna is attached to the garage door opener. It is not the button that is normally used to open...

  • Page 249

    1. Turn the ignition switch to the on/run position. 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the homelink 威 button you wish to program while keeping the homelink 威 indicator light in view. 3. Simultaneously press and hold both the homelink 威 button you want to program and t...

  • Page 250

    Reprogramming a single homelink 威 button to reprogram a channel that has been previously trained, follow these steps: 1. Turn the ignition switch to the on/run position. 2. Press and hold the desired homelink 威 button until the indicator light begins to flash after 20 seconds. Do not release the but...

  • Page 251

    • if the indicator light stays on constantly, program- ming is complete and the garage door/device should activate when the homelink 威 button is pressed. • to program the two remaining homelink 威 buttons, repeat each step for each remaining button. Do not erase the channels. Reprogramming a single h...

  • Page 252

    3. Continue to press and hold the homelink 威 button, while you press and release (“cycle”), your hand-held transmitter every two seconds until homelink 威 has successfully accepted the frequency signal. The indicator light will flash slowly and then rapidly when fully trained. 4. Watch for the homeli...

  • Page 253

    Using homelink 姞 to operate, press and release the programmed homelink 威 button. Activation will now occur for the programmed device (i.E., garage door opener, gate opera- tor, security system, entry door lock, home/office light- ing, etc.,). The hand-held transmitter of the device may also be used ...

  • Page 254

    Warning! • your motorized door or gate will open and close while you are programming the universal trans- ceiver. Do not program the transceiver if people, pets or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” fea...

  • Page 255

    Power sunroof — if equipped the power sunroof switch is located between the sun visors on the overhead console. Warning! • never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating t...

  • Page 256

    Opening sunroof — express press the switch rearward and release it within one-half second and the sunroof will open automatically from any position. The sunroof will open fully and stop automati- cally. This is called “express open”. During express open operation, any movement of the sunroof switch ...

  • Page 257

    Note: if three consecutive sunroof close attempts re- sult in pinch protect reversals, the fourth close attempt will be a manual close movement with pinch protect disabled. Venting sunroof — express press and release the vent button within one half second and the sunroof will open to the vent positi...

  • Page 258

    Ignition off operation the power sunroof switches remain active for up to approximately ten minutes after the ignition switch has been turned off. Opening either front door will cancel this feature. The time is programmable. Refer to “elec- tronic vehicle information center (evic)/personal set- ting...

  • Page 259

    Warning! • never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death. • in a collision, there is a gre...

  • Page 260

    Position. The sunroof will close fully and stop automati- cally. This is called “express close”. During express close operation, any movement of the switch will stop the sunroof. Closing sunroof — manual mode to close the sunroof, press and hold the switch in the forward position. Any release of the...

  • Page 261

    Movement and the shade will remain in a partially closed condition until the switch is pushed and held forward again. Pinch protect feature this feature will detect an obstruction in the opening of the sunroof during express close operation. If an ob- struction is detected, the sunroof will automati...

  • Page 262

    Ignition off operation the power sunroof switches can be programmed to remain active for up to approximately ten minutes after the ignition switch has been turned off. Refer to “elec- tronic vehicle information center (evic)/customer- programmable features (system setup)” in “under- standing your in...

  • Page 263

    • to ensure proper operation a mopar 威 knob and element must be used. Caution! Power outlets are designed for accessory plugs only. Do not insert any other object in the power outlets as this will damage the outlet and blow the fuse. Improper use of the power outlet can cause damage not covered by y...

  • Page 264

    In addition to the front power outlet, there is also a power outlet located in the storage area of the center console. The rear power outlet is located in the right rear cargo area. Note: the rear power outlet can be switched to “battery” powered all the time by switching the power outlet right rear...

  • Page 265

    Power outlet right rear quarter panel fuse power outlet fuse locations 1 — m7 fuse 20 a yellow power outlet right rear quarter panel 2 — m6 fuse 20 a yellow cigar lighter instrument panel 3 — m36 fuse 20 a yellow power outlet console bin 3 understanding the features of your vehicle 261.

  • Page 266

    Warning! To avoid serious injury or death: • only devices designed for use in this type of outlet should be inserted into any 12 volt outlet. • do not touch with wet hands. • close the lid when not in use and while driving the vehicle. • if this outlet is mishandled, it may cause an electric shock a...

  • Page 267

    Power inverter — if equipped there is a 115 volt, 150 watt inverter outlet located on the back of the center console to convert dc current to ac current. This outlet can power cellular phones, electron- ics and other low power devices requiring power up to 150 watts. Certain high-end video games, su...

  • Page 268

    The power inverter is designed with built-in overload protection. If the power rating of 150 watts is exceeded, the power inverter will automatically shut down. Once the electrical device has been removed from the outlet the inverter should automatically reset. If the power rating exceeds approximat...

  • Page 269

    Cupholders there are two cupholders for the front seat passengers located in the center console. There are two cupholders for the rear seat passengers located in the fold-down center armrest. Front cupholder location rear cupholders 3 understanding the features of your vehicle 265.

  • Page 270

    Storage glove compartment the glove compartment is located on the right side of the instrument panel. To open the glove compartment, pull outward on the latch and lower the glove box door. Glove compartment opened glove compartment 266 understanding the features of your vehicle.

  • Page 271

    Door storage large storage areas are built into the door panels for easy access. Center console the center console contains both an upper and a lower storage area. Door panel storage storage compartment 3 understanding the features of your vehicle 267.

  • Page 272

    To open the upper storage compartment, pull upward on the small latch located on the lid. Lift upward on the larger of the latches to access the lower storage compartment. Storage compartment latches lower storage compartment 268 understanding the features of your vehicle.

  • Page 273

    Warning! Do not operate this vehicle with a console compart- ment lid in the open position. Cellular phones, music players, and other handheld electronic devices should be stowed while driving. Use of these devices while driving can cause an accident due to distrac- tion, resulting in death or injur...

  • Page 274

    To operate the flashlight, press the switch once for high, twice for low, and a third time to return to off. Cargo storage bins there are four removable storage bins located in the rear cargo area. There are two storage bins located on either side of the cargo area. Three-press switch rear storage b...

  • Page 275

    Two additional storage bins are located under the load floor. To access the lower storage bins, raise the load floor and attach the tether hook (attached to the bottom of the load floor) to the liftgate opening. Tether strap lower storage bins 3 understanding the features of your vehicle 271.

  • Page 276

    Retractable cargo area cover — if equipped note: the purpose of this cover is for privacy, not to secure loads. It will not prevent cargo from shifting or protect passengers from loose cargo. To cover the cargo area: 1. Grasp the cover at the center handle. Pull it over the cargo area. 2. Insert the...

  • Page 277

    Warning! In a collision, a loose cargo cover in the vehicle could cause injury. It could fly around in a sudden stop and strike someone in the vehicle. Do not store the cargo cover on the cargo floor or in the passenger compart- ment. Remove the cover from the vehicle when taken from its mounting. D...

  • Page 278

    Warning! • to help protect against personal injury, passengers should not be seated in the rear cargo area. The rear cargo space is intended for load carrying purposes only, not for passengers, who should sit in seats and use seat belts. • cargo tie-down hooks are not safe anchors for a child seat t...

  • Page 279

    Rear window features rear window wiper/washer the rear wiper/washer is controlled by a rotary switch located on the control lever. The control lever is located on the left side of the steering column. Rotate the center portion of the lever upward to the first detent for intermittent operation and to...

  • Page 280

    If the rear wiper is operating when the ignition is turned off, the wiper will automatically return to the “park” position. If the liftgate flipper glass is open, the rear window wiper/washer functionality is interrupted and the wiper stops at that “park” position. When the liftgate flipper glass is...

  • Page 281

    Roof luggage rack — if equipped the crossbars and siderails are designed to carry the weight on vehicles equipped with a luggage rack. The load must not exceed 150 lbs (68 kg), and should be uniformly distributed over the luggage rack crossbars. Note: if not equipped with crossbars, your authorized ...

  • Page 282

    Caution! • to prevent damage to the roof of your vehicle, do not carry any loads on the roof rack without the crossbars installed. The load should be secured and placed on top of the crossbars, not directly on the roof. If it is necessary to place the load on the roof, place a blanket or some other ...

  • Page 283

    Warning! Cargo must be securely tied before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in per- sonal injury or property damage. Follow the roof rack cautions when carrying cargo on your roof rack. 3 understanding the features of you...

  • Page 285: Contents

    Understanding your instrument panel contents 䡵 instrument panel features . . . . . . . . . . . . . . . 285 䡵 instrument cluster . . . . . . . . . . . . . . . . . . . . 286 䡵 instrument cluster descriptions . . . . . . . . . . . 287 䡵 electronic vehicle information center (evic) . . 296 ▫ electronic ...

  • Page 286

    ▫ turn menu off . . . . . . . . . . . . . . . . . . . . . . 319 ▫ keyless enter-n-go display — if equipped . . . 319 ▫ compass / temperature display . . . . . . . . . 319 ▫ customer-programmable features (system setup) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321 䡵 media center 730n/4...

  • Page 287

    ▫ operating instructions (uconnect™ phone) — if equipped . . . . . . . . . . . . . . . . . . . . . . 355 䡵 ipod 威 /usb/mp3 control — if equipped . . . . . 355 ▫ connecting the ipod 威 or external usb device . . . . . . . . . . . . . . . . . . . . . . . . . . . . 356 ▫ using this feature . . . . . . ....

  • Page 288

    ▫ unwired 威 stereo headphone lifetime limited warranty . . . . . . . . . . . . . . . . . . . . 380 ▫ system information . . . . . . . . . . . . . . . . . . . 382 䡵 steering wheel audio controls . . . . . . . . . . . . 396 ▫ radio operation . . . . . . . . . . . . . . . . . . . . . 396 ▫ cd player . ...

  • Page 289

    Instrument panel features 1 — air outlet 6 — lower switch bank 11 — hood release 2 — instrument cluster 7 — hazard switch 12 — fuel door release 3 — radio 8 — storage bin 13 — headlight switch 4 — glove compartment 9 — esc button 14 — dimmer control 5 — climate controls 10 — ignition switch 4 unders...

  • Page 290

    Instrument cluster 286 understanding your instrument panel.

  • Page 291

    Instrument cluster descriptions 1. Tachometer indicates the engine speed in revolutions per minute (rpm x 1000). 2. Air bag warning light this light will turn on for four to eight seconds as a bulb check when the ignition switch is first turned to the on/run position. If the light is either not on d...

  • Page 292

    Warning! A malfunctioning catalytic converter, as referenced above, can reach higher temperatures than in normal operating conditions. This can cause a fire if you drive slowly or park over flammable substances such as dry plants, wood, cardboard, etc. This could result in death or serious injury to...

  • Page 293

    5. Tow/haul indicator light — if equipped this light will illuminate when the tow/ haul button has been selected. The tow/ haul button is located in the center of the instrument panel (below the climate controls). 6. Turn signal indicator the arrows will flash with the exterior turn signals when the...

  • Page 294

    As it was before the repair or service. If s/he cannot do so, then the odometer must be set at zero, and a sticker must be placed in the door jamb stating what the mileage was before the repair or service. It is a good idea for you to make a record of the odometer reading before the repair/ service,...

  • Page 295

    Maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the tpms low tire pressure telltale. Your vehicle has also been equipped with a tpms malfunction indicator to indicate when the system is not operating properly. The tpms malfunction indicato...

  • Page 296

    12. Park/headlight on indicator — if equipped this indicator will illuminate when the park lights or headlights are turned on. 13. Seat belt reminder light when the ignition switch is first turned to the on/run position, this light will turn on for four to eight seconds as a bulb check. During the b...

  • Page 297

    The dual brake system provides a reserve braking capac- ity in the event of a failure to a portion of the hydraulic system. A leak in either half of the dual brake system is indicated by the brake warning light, which will turn on when the brake fluid level in the master cylinder has dropped below a...

  • Page 298

    The light also will turn on when the parking brake is applied with the ignition switch in the on/run posi- tion. Note: this light shows only that the parking brake is applied. It does not show the degree of brake application. 15. Anti-lock brake (abs) light this light monitors the anti-lock brake sy...

  • Page 299

    18. Fuel door reminder the fuel pump symbol points to the side of the vehicle where the fuel door is located. 19. Fuel gauge the pointer shows the level of fuel in the fuel tank when the ignition switch is in the on/run position. 20. Electronic vehicle information center (evic) white telltale area t...

  • Page 300

    25. Temperature gauge the temperature gauge shows engine coolant tempera- ture. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily. The gauge pointer will likely indicate a higher tempera- ture when driving in hot weather, up mountain grades, or ...

  • Page 301

    The evic consists of the following: • fuel economy • acc: (if equipped) • vehicle speed • trip info • terrain: (if equipped) • tire psi: (if equipped) • vehicle info • messages • units: setting • system setup • turn menu off electronic vehicle information center (evic) display 4 understanding your i...

  • Page 302

    The system allows the driver to select information by pressing the following buttons mounted on the steering wheel: up button press and release the up button to scroll up- ward through the main menus (fuel economy, vehicle info, tire psi, cruise, messages, units, system setup, vehicle speed, trip in...

  • Page 303

    Back button press the back button to scroll back to a previous menu or sub-menu. Electronic vehicle information center (evic) displays the evic display consists of three sections: 1. The top line where compass direction, odometer line and outside temperature are displayed. 2. The main display area w...

  • Page 304

    Of this message type are ⬙ turn signal on ⬙ (if a turn signal is left on) and ⬙ lights on ⬙ (if driver leaves the vehicle). • unstored messages until run these messages deal primarily with the remote start feature. This message type is displayed until the ignition is in the run state. Examples of th...

  • Page 305

    • liftglass open • left front turn signal lamp out • right front turn signal lamp out • left rear turn signal lamp out • right rear turn signal lamp out • low tire pressure • esc system off • service blind spot system • blind spot detection unavailable • blind spot system off • blind spot system una...

  • Page 306

    • sensed vehicle indicator — the system detects a slower moving vehicle in the same lane. Refer to “adaptive cruise control (acc)” in “understanding the features of your vehicle” (if equipped). • driver override — if you apply the accelerator after setting the desired speed in the acc system. Refer ...

  • Page 307

    To “adaptive cruise control (acc)” in “understand- ing the features of your vehicle” (if equipped). • cruise off when park brake is on • acc cancelled below min. Speed. • coolant low • service air suspension system • oil change due • key in ignition • lights on • key in ignition lights on • ignition...

  • Page 308

    • memory 1 profile recall • memory 2 profile recall • press brake pedal and push button to start • wrong key • damaged key • key not programmed • function currently unavailable — power liftgate • unlock to operate — power liftgate • put in park to operate — power liftgate • automatic high beams on •...

  • Page 309

    • raising vehicle ride height (with icon) • lowering vehicle ride height (with icon) • normal vehicle ride height — this message is dis- played (for 5 seconds) when the vehicle has achieved the normal vehicle ride height. • off road ride height level 1 — this message is displayed (for 5 seconds) whe...

  • Page 310

    • selected ride height not permitted — the vehicle speed is too high to enter one of the preset levels (entry/exit level/off road ride height level 1/off road ride height level 2). • air suspension system cooling down – please wait — this message is displayed if the compressor tempera- ture level is...

  • Page 311

    • electronic speed control set this light will turn on when the electronic speed control is set. For further information, refer to “electronic speed control” in “under- standing the features of your vehicle.” • adaptive cruise control (acc) on this light will turn on when the acc is on. For further ...

  • Page 312

    Note: • even if power steering assistance is no longer opera- tional, it is still possible to steer the vehicle. Under these conditions there will be a substantial increase in steering effort, especially at very low vehicle speeds and during parking maneuvers. • if the condition persists, see your a...

  • Page 313

    Will display in the telltale display area. Tighten the fuel filler cap properly and press the select button to turn off the message. If the problem continues, the message will appear the next time the vehicle is started. A loose, improperly installed, or damaged fuel filler cap may also turn on the ...

  • Page 314

    • oil pressure warning light this telltale indicates low engine oil pressure. If the light turns on while driving, stop the vehicle and shut off the engine as soon as possible. A chime will sound for four minutes when this light turns on. Do not operate the vehicle until the cause is corrected. This...

  • Page 315

    Required. You may experience reduced performance, an elevated/rough idle or engine stall and your vehicle may require towing. • engine temperature warning light this light warns of an overheated engine condi- tion. As temperatures rise and the gauge ap- proaches h, this indicator will illuminate and...

  • Page 316

    Warning! If the transmission temperature warning light is illuminated and you continue operating the vehicle, in some circumstances you could cause the fluid to boil over, come in contact with hot engine or exhaust components and cause a fire. Engine oil change indicator system oil change due your v...

  • Page 317

    Vehicles not equipped with keyless enter-n-go 1. Turn the ignition switch to the on/run position (do not start the engine.) 2. Fully depress the accelerator pedal, slowly, three times within 10 seconds. 3. Turn the ignition switch to the off/lock position. Note: if the indicator message illuminates ...

  • Page 318

    (mds) (if equipped) allows the engine to operate on four cylinders, or if you are driving in a fuel efficient manner. This feature allows you to monitor when you are driving in a fuel efficient manner, and it can be used to modify driving habits in order to increase fuel economy. Distance to empty (...

  • Page 319

    Cruise control press and release the up or down button until ⬙ acc ⬙ (if equipped with adaptive cruise control) or ⬙ cruise ⬙ is highlighted in the evic. Status of the acc or cruise is displayed in the menu line also. Press and release the select (right arrow) button to display the following informa...

  • Page 320

    Trip info press and release the up or down button until “trip info” displays highlighted in the evic and press the select button. Press and release the up/down but- tons until one of the following trip functions displays in the evic: • trip a • trip b • elapsed time press the up/down buttons to cycl...

  • Page 321

    Down until the preferred setting is highlighted, then press and release the select button until a check-mark appears next to the setting, showing that the setting has been selected. Vehicle info (customer information features) press and release the up or down button until “vehicle info” displays in ...

  • Page 322

    • tire pressure monitor system (shows the current pres- sure of all four road tires). For additional information, refer to “tire pressure monitor system” in “starting and operating”. Note: • tires heat up during normal driving conditions. Heat will cause the tire pressure to increase from 2 to 6 psi...

  • Page 323

    Turn menu off select from main menu using the down button. Press- ing the select button blanks the menu display. Pressing any one of the four steering wheel buttons brings the menu back. Keyless enter-n-go display — if equipped when the engine start/stop button is pressed to change ignition switch p...

  • Page 324

    Metallic objects) until the cal indicator displayed in the evic turns off. The compass will now function normally. Note: a good calibration requires a level surface and an environment free from large metallic objects such as buildings, bridges, underground cables, railroad tracks, etc. Compass varia...

  • Page 325

    3. Press the down button until the “compass variance” message is displayed in the evic, then press the select button. The last variance zone number displays in the evic. 4. Press and release the select button until the proper variance zone is selected, according to the map. 5. Press and release the ...

  • Page 326

    Out of park or the vehicle begins moving, a warning message setup not available, is followed in three seconds by, vehicle not in park. Press and release the up or down button until setup displays in the evic. Use the up or down button to display one of the following choices. Select language when in ...

  • Page 327

    Remote unlock sequence when unlock driver door only on 1st press is selected, only the driver’s door will unlock on the first press of the rke transmitter unlock button. When driver door 1st press is selected, you must press the rke transmitter unlock button twice to unlock the passenger’s doors. Wh...

  • Page 328

    Removed showing the system has been deactivated. Refer to “driver memory seat” in “understanding the fea- tures of your vehicle.” remote start comfort sys. When this feature is selected and the remote start is activated, the heated steering wheel and driver heated seat features will automatically tu...

  • Page 329

    With or without the sound horn on lock feature selected. To make your selection, press and release the select button until a check-mark appears next to the feature showing the system has been activated or the check-mark is removed showing the system has been deactivated. Headlamp off delay when this...

  • Page 330

    Feature showing the system has been activated or the check-mark is removed showing the system has been deactivated. Note: the seat will return to the memorized seat location (if recall memory with remote key unlock is set to on) when the rke transmitter is used to unlock the door. Refer to “driver m...

  • Page 331

    Selection, scroll up or down until the preferred setting is highlighted, then press and release the select button until a check-mark appears next to the setting, showing that the setting has been selected. Display fuel saver — if equipped the “eco” message is located in the compass/ temperature disp...

  • Page 332

    Next to the feature showing the system has been activated or the check-mark is removed showing the system has been deactivated. When this feature is deactivated, the system reverts to the standard intermittent wiper operation. Hill start assist (hsa) when this feature is selected, the hsa system is ...

  • Page 333

    Forward collision warning the forward collision warning (fcw) feature can be can be set to far, set to near or turned off. The default status of fcw is the far setting. This means the system will warn you of a possible collision with the vehicle in front of you when you are farther away. This gives ...

  • Page 334

    Liftgate chime when this feature is selected the chime will sound when the liftgate is in operation, signaling that the liftgate is in operation. To make your selection, press and release the select button until a check-mark appears next to the feature showing the system has been activated or the ch...

  • Page 335

    Media center 130 (sales code res) note: the radio sales code is located on the lower right side of the radio faceplate. Operating instructions — radio mode note: the ignition switch must be in the on or acc position to operate the radio. Power switch/volume control (rotary) push the on/volume contro...

  • Page 336

    Seek buttons press and release the seek buttons to search for the next listenable station in am/fm mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations wit...

  • Page 337

    Push the rotary tune/scroll control knob a second time and mid will display. Turn the tune/scroll control knob to the right or left to increase or decrease the mid-range tones. Push the rotary tune/scroll control knob a third time and treble will display. Turn the tune/scroll control knob to the rig...

  • Page 338

    Set 2 in both am and fm. This allows a total of 12 am and 12 fm stations to be stored into pushbutton memory. The stations stored in set 2 memory can be selected by pressing the pushbutton twice. Every time a preset button is used, a corresponding button number will display. Buttons 1 - 6 these butt...

  • Page 339

    If you insert a disc with the ignition on and the radio on, the unit will switch from radio to cd mode and begin to play when you insert the disc. The display will show the track number, and index time in minutes and seconds. Play will begin at the start of track 1. Caution! • this cd player will ac...

  • Page 340

    Rw/ff press and hold the ff (fast forward) button and the cd player will begin to fast forward until ff is released, or rw or another cd button is pressed. The rw (reverse) button works in a similar manner. Am/fm button press the button to select either am or fm mode. Set/rnd button (random play but...

  • Page 341

    • maximum number of files: 255 • maximum number of folders. (the radio display of file names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to display the file name and folder name, and will assign a number instead. With a maximum number of files, exc...

  • Page 342

    Mpeg specifi- cation sampling fre- quency (khz) bit rate (kbps) mpeg-1 audio layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 112, 96, 80, 64, 56, 48, 40, 32 mpeg-2 audio layer 3 24, 22.05, 16 160, 128, 144, 112, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 id3 tag information for artist, song title, and...

  • Page 343

    Operation instructions - auxiliary mode the auxiliary (aux) jack is an audio input jack, which allows the user to plug in a portable device, such as an mp3 player, or cassette player, and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers. Pressing the dis...

  • Page 344

    Operating instructions — radio mode note: the ignition switch must be in the on/run or acc position to operate the radio. Power switch/volume control (rotary) push the on/volume control knob to turn on the radio. Push the on/volume control knob a second time to turn off the radio. Electronic volume ...

  • Page 345

    Phone button uconnect™ phone — if equipped press this button to operate the uconnect™ phone feature (if equipped). Refer to “uconnect™ phone” in the uconnect™ user manual located on the dvd for further details. If your vehicle is not equipped with or this feature is not available on your vehicle, a ...

  • Page 346

    Info button press the info button for an rds station (one with call letters displayed). The radio will return a radio text message broadcast from an fm station (fm mode only). Rw/ff pressing the rw (rewind) or ff (fast forward) buttons causes the tuner to search for the next frequency in the directi...

  • Page 347

    Push the rotary tune/scroll control knob again to exit setting tone, balance, and fade. Music type button pressing this button once will turn on the music type mode for five seconds. Pressing the music type button or turning the tune/scroll control knob within five seconds will allow the program for...

  • Page 348

    Program type 16-digit character display soft soft soft rock soft rck soft rhythm and blues soft r&b sports sports talk talk top 40 top 40 weather weather by pressing the seek button when the music type icon is displayed, the radio will be tuned to the next frequency station with the same selected mu...

  • Page 349

    Window. Select the button (1–6) you wish to lock onto this station and press and release that button. If a button is not selected within five seconds after pressing the set/ rnd button, the station will continue to play but will not be stored into pushbutton memory. You may add a second station to e...

  • Page 350

    Inserting compact disc(s) gently insert one cd into the cd player with the cd label facing up. The cd will automatically be pulled into the cd player and the cd icon will illuminate on the radio display. If a cd does not go into the slot more than 1.0 in (2.5 cm), a disc may already be loaded and mu...

  • Page 351

    Seek button press the right seek button for the next selection on the cd. Press the left seek button to return to the beginning of the current selection, or return to the beginning of the previous selection if the cd is within the first second of the current selection. Pressing and holding the seek ...

  • Page 352

    Supported medium formats (file systems) the medium formats supported by the radio are iso 9660 level 1 and level 2 and includes the joliet extension. When reading discs recorded using formats other than iso 9660 level 1 and level 2, the radio may fail to read files properly and may be unable to play...

  • Page 353

    Supported mp3 file formats the radio will recognize only files with the *.Mp3 exten- sion as mp3 files. Non-mp3 files named with the *.Mp3 extension may cause playback problems. The radio is designed to recognize the file as an invalid mp3 and will not play the file. When using the mp3 encoder to co...

  • Page 354

    Loading times for playback of mp3 files may be affected by the following: • media - cd-rw media may take longer to load than cd-r media • medium formats - multisession discs may take longer to load than non-multisession discs • number of files and folders - loading times will increase with more file...

  • Page 355

    Operation instructions - auxiliary mode the auxiliary (aux) jack is an audio input jack which allows the user to plug in a portable device such as an mp3 player or cassette player and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers. Pressing the aux but...

  • Page 356

    Information, call the toll-free number 888-539-7474, or visit the sirius web site at www.Sirius.Com, or at www.Siriuscanada.Ca for canadian residents. Electronic serial number/sirius identification number (esn/sid) please have the following information available when calling: 1. The electronic seria...

  • Page 357

    Reception quality satellite reception may be interrupted due to one of the following reasons: • the vehicle is parked in an underground parking structure or under a physical obstacle. • dense tree coverage may interrupt reception in the form of short audio mutes. • driving under wide bridges or alon...

  • Page 358

    Additional three seconds will make the radio display the song title all of the time (press and hold again to return to normal display). Rw/ff pressing the rw (rewind) or ff (fast forward) buttons causes the tuner to search for the next channel in the direction of the arrows. Tune control (rotary) tu...

  • Page 359

    Set button – to set the pushbutton memory when you are receiving a channel that you wish to commit to pushbutton memory, press the set button. The symbol set 1 will now show in the display window. Select the button (1-6) you wish to lock onto this channel and press and release that button. If a butt...

  • Page 360

    This feature allows an ipod 威 or external usb device to be plugged into the usb port, located in the center console or glove compartment. Ipod 威 control supports mini, 4g, photo, nano, 5g ipod 威 and iphone 威 devices. Some ipod 威 software versions may not fully support the ipod 威 control features. Pl...

  • Page 361

    Note: the center console will have a position where the ipod 威 or consumer electronic audio device cable can be routed through without damaging the cable when closing the lid. A factory cut out space for the cable to be routed may be located in the base of the center console on either the front or s...

  • Page 362

    On the radio faceplate or press the vr button and say ⬙ usb ⬙ or ⬙ switch to usb ⬙ . Once in the ipod 威 /usb/mp3 control mode, audio tracks (if available from audio device) start playing over the vehicle’s audio system. Play mode when switched to ipod 威 /usb/mp3 control mode, the ipod 威 or external ...

  • Page 363

    • while a track is playing, press the info button to see the associated metadata (artist, track title, album, etc.) for that track. Pressing the info button again jumps to the next screen of data for that track. Once all screens have been viewed, the last info button press will go back to the play m...

  • Page 364

    Press the tune control knob to select and start playing the track. Turning the tune control knob fast will scroll through the list faster. During fast scroll, a slight delay in updating the information on the radio display may be noticeable. • during all list modes, the ipod 威 displays all lists in ...

  • Page 365

    • music type button: the music type button is another shortcut button to the genre listing on your audio device. Caution! • leaving the ipod 威 or external usb device (or any supported device) anywhere in the vehicle in extreme heat or cold can alter the operation or damage the device. Follow the dev...

  • Page 366

    Play mode when switched to btsa mode, some audio devices can start playing music over the vehicle’s audio system, but some devices require the music to be initiated on the device first, then it will get streamed to the uconnect™ phone system. Seven devices can be paired to the uconnect™ phone system...

  • Page 367

    Uconnect™ multimedia video entertainment system (ves)™ — if equipped getting started • screen located in the overhead console : unfold the overhead lcd screen by pushing the button on the overhead console behind the screen. • with the ignition switch in the on or acc position, turn the radio on by p...

  • Page 368

    Single video screen note: typically there are two different ways to operate the features of the video entertainment system (ves)™. • the remote control • the touch-screen radio (if equipped) play a dvd 1. Press the open/close or load hard-key on the radio faceplate (touch-screen). Or press the load ...

  • Page 369

    Note: the ves™ system will retain the last setting when turned off. Using the touch-screen radio controls 1. Press the menu hard-key on the radio faceplate. 2. Touch the rear ves soft-key to display the rear ves controls. If a channel list appears on the right side of the screen, touch the hide list...

  • Page 370

    3. Touch the 1 soft-key and then the disc soft-key in the media column. To exit touch the back arrow soft-key at the top left of the screen. Note: the “1” and “2” soft-keys are displayed for the headphone channels. Touch 1 or 2 based on which channel you want to change, select the new mode from the ...

  • Page 371

    Note: • to view a dvd on the radio press the radio/media hard-key, on the radio faceplate, then touch the disc tab soft-key and then the view video soft-key. • viewing a dvd on the touch-screen radio screen is not available in all states/provinces, and the vehicle must be stopped, and the shift leve...

  • Page 372

    When connecting an external source to the aux input, be sure to follow the standard color coding for the ves™ jacks: note: certain high-end video games, such as playsta- tion3 and xbox360 will exceed the power limit of the vehicle’s power inverter. Refer to the power inverter section in your vehicle...

  • Page 373

    2. Touch the rear ves soft-key to display the rear ves controls. If a channel list is displayed, press the hide list soft-key to display the rear ves controls screen. 3. Touch the 1 or 2 based on the headphone channel you want to change. To exit press the back arrow soft-key at the top of the screen...

  • Page 374

    Listen to an audio source on channel 2 while a video is playing on channel 1 ensure the remote control and headphone switch is on channel 2. Using the remote control 1. Press the mode button on the remote control and the mode select screen will display, unless a video is playing then only a small ba...

  • Page 375

    2. Touch the rear ves soft-key to display the rear ves controls. If a channel list is displayed, press the hide list soft-key to display the rear ves controls screen. 3. To listen to an audio source on channel 2 while a video is playing on channel 1, touch the 2 soft-key and choose an audio source. ...

  • Page 376

    Important notes for single video screen system • ves™ is able to transmit two channels of stereo audio simultaneously. • in split screen mode the left side equates to channel 1 and right side equates to channel 2. • if a video source is selected on channel 1, then channel 2 is for audio only. Select...

  • Page 377

    Note: • channel/screen 1 select mode information is shown on the left side of the screen. • channel/screen 2 select mode information is shown on the right side of the screen. Using the touch-screen radio controls 1. Press the menu hard-key on the radio faceplate. 2. Touch the rear ves soft-key to di...

  • Page 378

    3. Touch the 1 or 2 soft-key based on the channel you want to change and then the disc soft-key in the media column. To exit touch the back arrow at the top left of the screen. Note: • to view a dvd on the radio press the radio/media hard-key, on the radio faceplate, then touch the disc tab soft-key...

  • Page 379

    2. Channel selector indicators – when a button is pressed, the currently affected channel or channel button is illuminated momentarily. 3. Light – turns the remote control backlighting on or off. The remote backlighting turns off automatically after five seconds. 4. Channel/screen selector switch - ...

  • Page 380

    Disc in a radio with a multiple-disc changer, prog up selects the next disc and prog down selects the previ- ous disc. 11. Mute – press to mute the headphone audio output for the selected channel. 12. Slow – press to slow playback of a dvd disc. Press play ( 䉴 ) to resume normal play. 13. Status – p...

  • Page 381

    Remote control storage the video screen(s) come with a built in storage compart- ment for the remote control which is accessible when the screen is opened. To remove the remote, use your index finger to pull and rotate the remote towards you. Do not try to pull the remote straight down as it will be...

  • Page 382

    Vehicle is not equipped with a dvd player, follow the radio’s instructions to turn video lock on. The radio and the video screen(s) indicate when video lock is active. • pressing the video lock again or turning the ignition off turns video lock off and allows remote control operation of the ves™. Re...

  • Page 383

    Controls the headphone power indicator and controls are located on the right ear cup. Note: the rear video system must be turned on before sound can be heard from the headphones. To conserve battery life, the headphones will automatically turn off approximately three minutes after the rear video sys...

  • Page 384

    3. If the video screen is displaying a video source (such as a dvd video), pressing status shows the status on a popup banner at the bottom of the screen. Pressing the mode button will advance to the next mode. When the mode is in an audio only source (such as fm), the mode selection menu appears on...

  • Page 385

    What does this warranty cover? Except as specified below, this warranty covers any product that in normal use is defective in workmanship or materials. What does this warranty not cover? This warranty does not cover any damage or defect that results from misuse, abuse or modification of the product ...

  • Page 386

    You may register your unwired 威 wireless headphones online at www.Unwiredtechnology.Com or by phone at 1-888-293-3332. System information shared modes this allows the ves™ to output radio sources to the headphones and the radio to output ves™ sources to the vehicle speakers. When the radio and ves™ ...

  • Page 387

    Information mode display 1. Channel 1 mode 2. Channel 1 shared status 3. Channel 1 audio only/mute 4. Channel 2 mode 5. Channel 2 shared status 6. Channel 2 audio only/mute 7. Channel 1 enter button action 8. Channel 2 enter button action 9. Clock 10. Video lock 11. Not available / error 12. Disc ch...

  • Page 388

    Numeric keypad menu when the display for either channel 1 or channel 2 shows direct tune, pressing the remote control’s enter button activates a numeric keypad menu. This screen makes it easy to enter a specific tuner frequency, satellite channel, or track number. To enter the desired digit: 1. Pres...

  • Page 389

    Station list menu when listening to satellite audio, pressing the remote control’s menu button displays a list of all available channels. Navigate this list using the remote control’s navigation buttons ( 䉱 , 䉲 ) to find the desired station, press the remote control’s enter button to tune to that st...

  • Page 390

    Display settings when watching a video source (dvd video with the disc in play mode, aux video, sirius backseat tv™, etc.), pressing the remote control’s setup button activates the display settings menu. These settings control the appear- ance of the video on the screen. The factory default settings...

  • Page 391

    • close the video screen. • to change the current audio mode, press the remote control’s mode button. This will automatically select the next available audio mode without using the mode select menu. • when the screen is reopened, the video screen will automatically turn back on and show the appropri...

  • Page 392

    Dvd audio support when a dvd-audio disc is inserted in the ves™ dvd player, the dvd-audio title on the disc is played by default (most dvd-audio discs also have a video title, but the video title is ignored). All multi-channel program material is automatically mixed down to two channels, which may r...

  • Page 393

    • mixed media recordable dvd formats will only play the video_ts portion of the disc. If you are still having trouble writing a disc that is playable in the ves™ dvd player, check with the disc recording software publisher for more information about burning playable discs. The recommended method for...

  • Page 394

    Between 64 and 192kbps. Variable bit rates are also supported. For both formats, the recommended sample rate is either 44.1khz or 48khz. • to change the current file, use the remote control’s or dvd player’s 䉱 button to advance to the next file, or the 䉲 button to return to the start of the current ...

  • Page 395

    Display other language setup all of the language settings have a special ⬙ other ⬙ setting to accommodate languages other than japanese or eng- lish. These languages are selected using a special four- digit code. To enter a new language code, activate the dvd setup menu and follow these additional i...

  • Page 396

    • when the entire four-digit code is entered, press the remote control’s enter button. If the language code is not valid, the numbers all change back to ⬙ * ⬙ . If the digits are visible after this step, then the language code is valid. Here is an abbreviated list of language codes. For more languag...

  • Page 397

    To set the password, activate the dvd setup menu and follow these additional instructions: • using the remote control left and right cursor but- tons, select the rating tab. • highlight ⬙ change password ⬙ , and then press the remote control’s enter button. • enter the current password. Select a dig...

  • Page 398

    • after the four-digit password is entered, press the remote control’s enter button to accept the change. To set the rating, activate the dvd setup menu and follow these additional instructions: • using the remote control’s left and right cursor buttons, select the rating tab. • highlight ⬙ change r...

  • Page 399

    • using the remote control’s up and down cursor buttons, select the new rating level, and then press the remote control’s enter button to accept the change. Product agreement this product incorporates copyright protection technol- ogy that is protected by u.S. Patents and other intellec- tual proper...

  • Page 400

    Steering wheel audio controls the remote sound system controls are located on the rear surface of the steering wheel. Reach behind the wheel to access the switches. The right-hand control is a rocker-type switch with a pushbutton in the center and controls the volume and mode of the sound system. Pr...

  • Page 401

    The button located in the center of the left-hand control will tune to the next preset station that you have pro- grammed in the radio preset pushbutton. Cd player pressing the top of the switch once will go to the next track on the cd. Pressing the bottom of the switch once will go to the beginning...

  • Page 402

    Note: if you experience difficulty in playing a particu- lar disc, it may be damaged (i.E., scratched, reflective coating removed, a hair, moisture or dew on the disc) oversized, or have protection encoding. Try a known good disc before considering disc player service. Radio operation and mobile pho...

  • Page 403

    Blower control rotate this control to regulate the amount of air forced through the ven- tilation system in any mode. The blower speed increases as you move the control to the right from the “o” (off) position. There are seven blower speeds. Temperature controls • driver temperature control rotate t...

  • Page 404

    Mode control (air direction) push the mode control buttons to choose from several patterns of air distribution. Panel air is directed through the outlets in the instrument panel. These outlets can be adjusted to direct airflow. Note: the center instrument panel outlets can be aimed so that they are ...

  • Page 405

    Note: • in floor, mix and defrost modes a small amount of air will flow through the outboard panel outlets for occupant comfort. • the air conditioning compressor operates in mix, defrost, or a blend of these modes, even if the air conditioning (a/c) button is not pressed. This dehu- midifies the ai...

  • Page 406

    Air conditioning control press this button to engage the air conditioning. A light will illuminate when the air conditioning system is engaged. Rotating the dial left into the blue area of the scale indicates cooler temperatures, while rotating right into the red area indicates warmer tem- peratures...

  • Page 407

    1. A/c button press and release to change the current air conditioning (a/c) setting, the indicator illuminates when a/c is on. Performing this function will cause the atc to switch into manual mode. 2. Recirculation control button press and release to change the current setting, the indicator illum...

  • Page 408

    Will cause the atc to switch into manual mode. The blower will engage immediately if the defrost mode is selected. 8. Passenger temperature control up button provides the passenger with independent temperature control. Push the button for warmer temperature set- tings. 9. Passenger temperature contr...

  • Page 409

    15. Driver temperature control down button provides the driver with independent temperature con- trol. Push the button for cooler temperature settings. 16. Driver temperature control up button provides the driver with independent temperature con- trol. Push the button for warmer temperature settings...

  • Page 410

    Manual operation this system offers a full complement of manual override features. Note: each of these features operate independently from each other. If any one feature is controlled manually, temperature control will continue to operate automati- cally. There are seven fixed blower speeds. Use the...

  • Page 411

    Note: in many temperature positions, the bi-level mode is designed to provide cooler air out of the panel outlets and warmer air from the floor outlets. Floor mode air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. Mix mode air ...

  • Page 412

    Note: • if the system is in mix, floor or defrost mode, the a/c can be turned off, but the a/c system shall remain active to prevent fogging of the windows. • if fog or mist appears on the windshield or side glass, select defrost mode and increase blower speed. Recirculation control when outside air...

  • Page 413

    Regular cleaning of the inside of the windows with a non-filming cleaning solution (vinegar and water works very well) will help prevent contaminates (cigarette smoke, perfumes, etc.) from sticking to the windows. Contaminates increase the rate of window fogging. Summer operation note: in some cases...

  • Page 414

    Operating tips chart 410 understanding your instrument panel.

  • Page 415: Starting And Operating

    Starting and operating contents 䡵 starting procedures . . . . . . . . . . . . . . . . . . . . 417 ▫ automatic transmission . . . . . . . . . . . . . . . 417 ▫ keyless enter-n-go . . . . . . . . . . . . . . . . . . . 418 ▫ normal starting . . . . . . . . . . . . . . . . . . . . . 419 ▫ extreme cold w...

  • Page 416

    䡵 four-wheel drive operation . . . . . . . . . . . . . 444 ▫ quadra-trac i 威 operating instructions/ precautions – if equipped . . . . . . . . . . . . . . 444 ▫ quadra-trac ii 威 operating instructions/ precautions – if equipped . . . . . . . . . . . . . . 444 ▫ shift positions . . . . . . . . . . . ...

  • Page 417

    䡵 power steering . . . . . . . . . . . . . . . . . . . . . . . 464 ▫ 3.6l engine . . . . . . . . . . . . . . . . . . . . . . . . 464 ▫ 5.7l engine . . . . . . . . . . . . . . . . . . . . . . . . 465 ▫ power steering fluid check . . . . . . . . . . . . . 466 䡵 multi-displacement system (mds) (if equi...

  • Page 418

    䡵 tires — general information . . . . . . . . . . . . . 492 ▫ tire pressure . . . . . . . . . . . . . . . . . . . . . . . 492 ▫ tire inflation pressures . . . . . . . . . . . . . . . . 493 ▫ tire pressures for high speed operation . . . 495 ▫ radial-ply tires . . . . . . . . . . . . . . . . . . . . ...

  • Page 419

    ▫ e-85 usage in non-flex fuel vehicles . . . . . . 515 ▫ mmt in gasoline . . . . . . . . . . . . . . . . . . . . 516 ▫ materials added to fuel . . . . . . . . . . . . . . . 516 ▫ fuel system cautions . . . . . . . . . . . . . . . . . 517 ▫ carbon monoxide warnings . . . . . . . . . . . . 518 䡵 flexi...

  • Page 420

    ▫ towing requirements . . . . . . . . . . . . . . . . . 537 ▫ towing tips . . . . . . . . . . . . . . . . . . . . . . . . 542 䡵 snow plow . . . . . . . . . . . . . . . . . . . . . . . . . . 544 䡵 recreational towing (behind motorhome, etc.) . . 545 ▫ towing this vehicle behind another vehicle . . 54...

  • Page 421

    Starting procedures before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. Warning! • when leaving the vehicle, always remove the key fob from the ignition and lock your ve...

  • Page 422

    Caution! Damage to the transmission may occur if the follow- ing precautions are not observed: • shift into park only after the vehicle has come to a complete stop. • shift into or out of reverse only after the vehicle has come to a complete stop and the engine is at idle speed. • do not shift from ...

  • Page 423

    Installing and removing the engine start/stop button installing the button 1. Remove the key fob from the ignition switch. 2. Insert the engine start/stop button into the ignition switch with the lettering facing up and readable. 3. Press firmly on the center of the button to secure it into position...

  • Page 424

    To turn off the engine using engine start/stop button 1. Place the shift lever in park, then press and release the engine start/stop button. 2. The ignition switch will return to the off position. 3. If the shift lever is not in park, the engine start/ stop button must be held for two seconds and ve...

  • Page 425

    • press the engine start/stop button a third time to return the ignition switch to the off position (evic displays “ignition mode off”). Extreme cold weather (below –20°f or ⫺ 29°c) to ensure reliable starting at these temperatures, use of an externally powered electric engine block heater (avail- a...

  • Page 426

    And hold the brake pedal, push the accelerator pedal all the way to the floor and hold it, then press and release the engine start/stop button once. The starter motor will engage automatically, run for 10 seconds, and then disengage. Once this occurs, release the accelerator pedal and the brake peda...

  • Page 427

    The engine block heater must be plugged in at least one hour to have an adequate warming effect on the engine. Warning! Remember to disconnect the engine block heater cord before driving. Damage to the 110-115 volt electrical cord could cause electrocution. Automatic transmission caution! Damage to ...

  • Page 428

    Warning! • unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into park, and remove the key fob. Once the key f...

  • Page 429

    Key ignition park interlock this vehicle is equipped with a key ignition park inter- lock which requires the shift lever to be placed in park before the ignition switch can be turned to the lock/ off position. The key fob can only be removed from the ignition when the ignition is in the lock/off pos...

  • Page 430

    (ers)” in this section). Moving the shift lever to the left or right (-/+) while in the drive position will select the highest available transmission gear, and will display that gear in the instrument cluster as 4, 3, 2, 1. Gear ranges do not race the engine when shifting from park or neutral into a...

  • Page 431

    Warning! • never use the park position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. • your vehicle could move and injure you and others if it is not completely in park. Check by trying to move...

  • Page 432

    Warning! (continued) • unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into park, and remove the key fob. On...

  • Page 433

    Caution! • before moving the shift lever out of park, you must turn the ignition switch from the lock/off position to the on/run position, and also press the brake pedal. Otherwise, damage to the shift lever could result. • do not race the engine when shifting from park or neutral into another gear ...

  • Page 434

    Warning! Do not coast in neutral and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. You might lose control of the vehicle and have a collision. Caution! Towing the vehicle, coasting, or driving for any oth...

  • Page 435

    Transmission limp home mode transmission function is monitored electronically for abnormal conditions. If a condition is detected that could result in transmission damage, transmission limp home mode is activated. In this mode, the transmission remains in the current gear until the vehicle is brough...

  • Page 436

    Lever is in the drive position. For example, if you shift the transmission into 3 (third gear), the transmission will never shift above third gear, but will shift down into second and first gear normally. You can switch between drive and ers mode at any vehicle speed. When the shift lever is in the ...

  • Page 437

    Note: to select the proper gear position for maximum deceleration (engine braking), simply press and hold the shift lever to the left (-). The transmission will shift to the range from which the vehicle can best be slowed down. Overdrive operation the automatic transmission includes an electronicall...

  • Page 438

    Right (-/+) while in the drive position will select the highest available transmission gear, and will display that gear in the instrument cluster as 6, 5, 4, 3, 2, 1. Gear ranges do not race the engine when shifting from park or neutral into another gear range. Park this range supplements the parkin...

  • Page 439

    Warning! • never use the park position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. • your vehicle could move and injure you and others if it is not completely in park. Check by trying to move...

  • Page 440

    Warning! (continued) • unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into park, and remove the key fob. On...

  • Page 441

    Caution! • before moving the shift lever out of park, you must turn the ignition switch from the lock/off position to the on/run position, and also press the brake pedal. Otherwise, damage to the shift lever could result. • do not race the engine when shifting from park or neutral into another gear ...

  • Page 442

    Warning! Do not coast in neutral and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. You might lose control of the vehicle and have a collision. Caution! Towing the vehicle, coasting, or driving for any oth...

  • Page 443

    These conditions, using a lower gear range will improve performance and extend transmission life by reducing excessive shifting and heat buildup. If the transmission operating temperature exceeds nor- mal operating limits, the powertrain controller will modify the transmission shift schedule and exp...

  • Page 444

    Transmission limp home mode transmission function is monitored electronically for abnormal conditions. If a condition is detected that could result in transmission damage, transmission limp home mode is activated. In this mode, the transmission remains in third gear regardless of which forward gear ...

  • Page 445

    The transmission into 3 (third gear), the transmission will never shift above third gear, but will shift down into second and first gear normally. Use of ers (or tow/haul mode) also enables an additional underdrive gear which is not normally used during through-gear accelerations. This additional ge...

  • Page 446

    Note: to select the proper gear position for maximum deceleration (engine braking), simply press and hold the shift lever to the left (-). The transmission will shift to the range from which the vehicle can best be slowed down. Overdrive operation the automatic transmission includes an electronicall...

  • Page 447

    The “tow/haul indicator light” will illuminate in the instrument cluster to indicate that tow/haul mode has been activated. Pressing the switch a second time restores normal operation. If the tow/haul mode is desired, the switch must be pressed each time the engine is started. Torque converter clutc...

  • Page 448

    Electronic range select (ers) feature, when the trans- mission is sufficiently warm, will demonstrate that the transmission is able to shift into and out of overdrive. • if the vehicle has not been driven for several days, the first few seconds of operation after shifting the trans- mission into gea...

  • Page 449

    When additional traction is required, the 4wd low position can be used to lock the front and rear driveshafts together and force the front and rear wheels to rotate at the same speed. The 4wd low position is intended for loose, slippery road surfaces only. Driving in the 4wd low position on dry, har...

  • Page 450

    Note: refer to “selec-terrain 威 – if equipped” in “start- ing and operating” for further information on the vari- ous positions and their intended usages. Neutral this range disengages both the front and rear driveshafts from the powertrain. It is to be used for flat towing behind another vehicle. R...

  • Page 451

    Note: if shift conditions/interlocks are not met, or a transfer case motor temperature protection condition exists, a “for 4x4 low slow below 3 mph or 5 kph put trans in n press 4 low” message will flash from the electronic vehicle information center (evic). Refer to “electronic vehicle information ...

  • Page 452

    “electronic vehicle information center (evic)” in “understanding your instrument panel” for further information. • shifting into or out of 4wd low is possible with the vehicle completely stopped; however, difficulty may occur due to the mating clutch teeth not being prop- erly aligned. Several attem...

  • Page 453

    5. Repeat steps 1 to 4 to shift out of neutral. Note: if shift conditions/interlocks are not met, a “to tow vehicle safely, read neutral shift procedure in owners manual” message will flash from the electronic vehicle information center (evic). Refer to “electronic vehicle information center (evic)”...

  • Page 454

    Selec-terrain™ — if equipped description selec-terrain™ combines the capabilities of the vehicle control systems, along with driver input, to provide the best performance for all terrains. Selec-terrain™ consists of the following positions: • sport – dry weather, on-road calibration. Only avail- abl...

  • Page 455

    With air suspension, the level will change to normal ride height (nrh) if the transfer case is in high range. The level will change to off-road 1 if the transfer case is in low range. • auto – fully automatic full time four-wheel drive operation can be used on and off road. Balances traction with se...

  • Page 456

    Quadra-lift™ — if equipped description the quadra-lift™ air suspension system provides full time load leveling capability along with the benefit of being able to adjust vehicle height by the push of a button. Selec-terrain™ switch 1 — up button 2 — down button 3 — park mode indicator lamp 4 — normal...

  • Page 457

    • normal ride height (nrh) – this is the standard position of the suspension and is meant for normal driving. • off-road 1 (or1) (raises the vehicle approximately 1.3 in (33 mm) – this position should be the default position for all off-road driving until or2 is needed. A smoother and more comfortab...

  • Page 458

    Selec-terrain™ knob is turned to the “sport” posi- tion. Turning the selec-terrain™ knob to the “auto” position will return the system to normal operation. • park mode (lowers the vehicle approximately 1.5 in (38 mm) – this position lowers the vehicle for easier passenger entry and exit as well as l...

  • Page 459

    After the engine is turned off, it may be noticed that the air suspension system operates briefly, this is normal. The system is correcting the position of the vehicle to ensure a proper appearance. To assist with changing a spare tire, the quadra-lift™ air suspension system has a feature which allo...

  • Page 460

    Operation the indicator lamps 3 through 6 will illuminate to show the current position of the vehicle. Flashing indicator lamps will show a position which the system is working to achieve. When raising, if multiple indicator lamps are flashing on the “up” button, the highest flashing indica- tor lam...

  • Page 461

    • normal ride height (nrh) – indicator lamp 4 will be illuminated when the vehicle is in this position. • park mode – indicator lamp 3 will be illuminated when the vehicle is in park mode. If park mode is requested while vehicle speed is between 15 mph (24 km/h) and 25 mph (40 km/h), indicator lamp ...

  • Page 462

    Off-road driving tips note: prior to off-road driving, remove the front air dam to prevent damage. The front air dam is attached to the lower front fascia with seven quarter turn fasteners and can be removed by hand. Front air dam 1 — front bumper 2 — front air dam fasteners 458 starting and operati...

  • Page 463

    Quadra-lift™ – if equipped when off-roading, it is recommended that the lowest useable vehicle height that will clear the current obstacle or terrain be selected. The vehicle height should then be raised as required by the changes in terrain. The selec-terrain™ switch will automatically change the v...

  • Page 464

    Streams. To maintain optimal performance of your vehi- cle’s heating and ventilation system it is recommended to switch the system into recirculation mode during water fording. Caution! When driving through water, do not exceed 5 mph (8 km/h). Always check water depth before entering, as a precautio...

  • Page 465

    Maintenance after driving through deep water, inspect your vehicle fluids and lubricants (engine oil, transmission oil, axle, transfer case) to assure the fluids have not been contami- nated. Contaminated fluid (milky, foamy in appearance) should be flushed/changed as soon as possible to pre- vent c...

  • Page 466

    Warning! If the engine stalls, you lose forward motion, or cannot make it to the top of a steep hill or grade, never attempt to turn around. To do so may result in tipping and rolling the vehicle. Always back care- fully straight down a hill in reverse gear. Never back down a hill in neutral using o...

  • Page 467

    • completely inspect the underbody of your vehicle. Check tires, body structure, steering, suspension, and exhaust system for damage. • inspect the radiator for mud and debris and clean as required. • check threaded fasteners for looseness, particularly on the chassis, drivetrain components, steerin...

  • Page 468

    Power steering 3.6l engine your vehicle is equipped with an electro-hydraulic power steering system that will give you good vehicle response and increased ease of maneuverability in tight spaces. The system will vary its assist to provide light efforts while parking and good feel while driving. If t...

  • Page 469

    Note: • even if power steering assistance is no longer opera- tional, it is still possible to steer the vehicle. Under these conditions there will be a substantial increase in steering effort, especially at very low vehicle speeds and during parking maneuvers. • if the condition persists, see your a...

  • Page 470

    Caution! Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and it should be avoided when possible. Damage to the power steering pump may occur. Power steering fluid check checking the power steering fluid level at a define...

  • Page 471

    If necessary, add fluid to restore to the proper indicated level. With a clean cloth, wipe any spilled fluid from all surfaces. Refer to “fluids, lubricants, and genuine parts” in “maintaining your vehicle” for further information. Multi-displacement system (mds) (if equipped) — 5.7l engine only thi...

  • Page 472

    When the parking brake is applied with the ignition switch in the on position, the “brake warning light” in the instrument cluster will illuminate. Note: • when the parking brake is applied and the transmis- sion is placed in gear, the “brake warning light” will flash. If vehicle speed is detected, ...

  • Page 473

    Warning! (continued) • do not leave the key fob in or near the vehicle, and do not leave keyless enter-n-go in the acc or on/run mode. A child could operate power win- dows, other controls, or move the vehicle. • be sure the parking brake is fully disengaged before driving; failure to do so can lead...

  • Page 474

    Also, your vehicle is equipped with trailer sway control (tsc), hill start assist (hsa), brake lock differential (bld), ready alert braking, rain brake support and, if it has four-wheel drive with the mp 3023 two-speed trans- fer case, hill descent control (hdc). Anti-lock brake system (abs) this sy...

  • Page 475

    Traction control system (tcs) this system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressure is applied to the slipping wheel(s) and engine power is reduced to provide enhanced acceleration and stability. A feature of the tcs system, brake limit...

  • Page 476

    Warning! The bas cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. The bas cannot prevent collisions, including those re- sulting from excessive speed in turns, driving on very slippery surfaces, or hydropl...

  • Page 477

    Warning! Many factors, such as vehicle loading, road condi- tions and driving conditions, influence the chance that wheel lift or rollover may occur. Erm cannot prevent all wheel lift or rollovers, especially those that involve leaving the roadway or striking objects or other vehicles. The capabilit...

  • Page 478

    Light” also flashes when the tcs is active. If the “esc activation/malfunction indicator light” begins to flash during acceleration, ease up on the accelerator and apply as little throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions. Warning! The electronic...

  • Page 479

    Partial off this mode is entered by momentarily pressing the “esc off” switch. When in “partial off” mode, the tcs portion of esc, except for the bld feature described in the tcs section, has been disabled and the “esc off indicator light” will be illuminated. All other stability features of esc fun...

  • Page 480

    Off” mode is overcome, turn esc back on by momen- tarily pressing the “esc off” switch. This may be done while the vehicle is in motion. 4wd low range partial off this is the normal operating mode for esc in 4wd low range. Whenever the vehicle is started in 4wd low range, or the transfer case (if eq...

  • Page 481

    Hill start assist (hsa) the hsa system is designed to assist the driver when starting a vehicle from a stop on a hill. Hsa will maintain the level of brake pressure the driver applied for a short period of time after the driver takes their foot off of the brake pedal. If the driver does not apply th...

  • Page 482

    Towing with hsa hsa will provide assistance when starting on a grade when pulling a trailer. Warning! • if you use a trailer brake controller with your trailer, your trailer brakes may be activated and deactivated with the brake switch. If so, when the brake pedal is released, there may not be enoug...

  • Page 483

    Ready alert braking – if equipped ready alert braking may reduce the time required to reach full braking during emergency braking situations. It anticipates when an emergency braking situation may occur by monitoring how fast the throttle is released by the driver. When the throttle is released very...

  • Page 484

    When hdc is enabled, the hdc icon will be illuminated in the instrument cluster. Hdc will automatically apply the brakes to control downhill speed to the selected level when necessary on grades greater than approximately 8%. It will usually not activate on level ground. The hdc speed may be adjusted...

  • Page 485

    Hdc is intended for low speed off-road driving only. At vehicle speeds above 20 mph (32 km/h), hdc will no longer function. When the vehicle speed drops below 20 mph (32 km/h), hdc function will automatically resume and the vehicle speed will return to the chosen set speed. Warning! Hdc is only inte...

  • Page 486

    Note: • the “esc activation/malfunction indicator light” and the “esc off indicator light” come on momen- tarily each time the ignition switch is turned on. • each time the ignition is turned on, the esc system will be on even if it was turned off previously. • the esc system will make buzzing or cl...

  • Page 487

    Note: • p (passenger) - metric tire sizing is based on u.S. Design standards. P-metric tires have the letter “p” molded into the sidewall preceding the size designa- tion. Example: p215/65r15 95h. • european-metric tire sizing is based on european design standards. Tires designed to this standard ha...

  • Page 488

    Tire sizing chart example: size designation: p = passenger car tire size based on u.S. Design standards ⴖ ....Blank.... ⴖ = passenger car tire based on european design standards lt = light truck tire based on u.S. Design standards t or s = temporary spare tire 31 = overall diameter in inches (in) 21...

  • Page 489

    Example: service description: 95 = load index — a numerical code associated with the maximum load a tire can carry h = speed symbol — a symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — the maximum speed corres...

  • Page 490

    Tire identification number (tin) the tin may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full tin, including the date code, located on the white sidewall side of the tire. Look for the tin on the outboard side of...

  • Page 491

    Tire terminology and definitions term definition b-pillar the vehicle b-pillar is the structural member of the body located behind the front door. Cold tire inflation pressure cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or ...

  • Page 492

    Tire loading and tire pressure tire and loading information placard location note: the proper cold tire inflation pressure is listed on the driver’s side b-pillar or the rear edge of the driver’s side door. Tire and loading information placard this placard tells you important information about the: ...

  • Page 493

    Loading the vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the tire and loading informati...

  • Page 494

    Available cargo and luggage load capacity is 650 lbs (295 kg) (since 5 x 150 = 750, and 1400 – 750 = 650 lbs [295 kg]). 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in ste...

  • Page 495

    5 starting and operating 491.

  • Page 496

    Warning! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. Tires — general information tire pressure proper tire inflation pressur...

  • Page 497

    Warning! (continued) • unequal tire pressures from one side of the ve- hicle to the other can cause the vehicle to drift to the right or left. • always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy improper inflation pressures can cause uneven wear patterns...

  • Page 498

    Caution! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage it. Inflation pressures specified on the placard are always cold tire inflation pressure. Cold tire inflation pressure...

  • Page 499

    Tire pressures for high speed operation the manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressure is very important. Increased tire pressure and ...

  • Page 500

    Vehicle. If your vehicle has this option refer to an authorized tire dealer for the recommended tire rotation pattern. If your vehicle is not equipped with an original equip- ment tire and wheel as a spare, a non-matching tempo- rary emergency use spare may be equipped with your vehicle. Temporary u...

  • Page 501

    Warning! Compact spares are for temporary emergency use only. With these spares, do not drive more than 50 mph (80 km/h). Temporary use spares have limited tread life. When the tread is worn to the tread wear indicators, the temporary use spare tire needs to be replaced. Be sure to follow the warnin...

  • Page 502

    Warning! Limited-use spares are for emergency use only. In- stallation of this limited-use spare tire affects vehicle handling. With this tire, do not drive more than the speed listed on the limit-use spare wheel. Keep inflated to the cold tire inflation pressure listed on your tire and loading info...

  • Page 503

    Tread wear indicators tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes 1/16 in (2 mm). When the tread is wo...

  • Page 504

    Warning! Tires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. You could lose control and have an collision resulting in serious injury or death. Keep dismounted tires in a cool, dry place wit...

  • Page 505

    Warning! • do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle. This can caus...

  • Page 506

    • due to limited clearance, use sae class “s” low profile cables or traction devices only. Security chain com- pany (scc) super z6 #sz 441 cables or equivalent are recommended. Warning! Using tires of different size and type (m+s, snow) between front and rear axles can cause unpredictable handling. ...

  • Page 507

    Caution! (continued) • observe the traction device manufacturer’s in- structions on the method of installation, operating speed, and conditions for use. Always use the suggested operating speed of the device manufac- turer’s if it is less than 30 mph (48 km/h). • do not use traction devices on a com...

  • Page 508

    These effects can be reduced by timely rotation of tires. The benefits of rotation are especially worthwhile with aggressive tread designs such as those on on/off-road type tires. Rotation will increase tread life, help to main- tain mud, snow, and wet traction levels, and contribute to a smooth, qu...

  • Page 509

    The outside temperature decreases, the tire pressure will decrease. Tire pressure should always be set based on cold inflation tire pressure. This is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after a three-hour pe...

  • Page 510

    Light will still be on. In this situation, the tire pressure monitoring telltale light will turn off only after the tires have been inflated to the vehicle’s recommended cold tire pressure value. Caution! • the tpms has been optimized for the original equipment tires and wheels. Tpms pressures have ...

  • Page 511

    • the tpms is not a substitute for proper tire mainte- nance, and it is the driver’s responsibility to maintain correct tire pressure using an accurate tire gauge, even if under-inflation has not reached the level to trigger illumination of the tire pressure monitoring telltale light. • seasonal tem...

  • Page 512

    Will automatically update and the tire pressure monitor- ing telltale light will extinguish, once the updated tire pressures have been received. The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) to receive this information. The tire pressure monitoring telltale light will...

  • Page 513

    For 75 seconds and then remain on solid. In addition, a “service tpm system” message will be displayed for a minimum of five seconds. For each subsequent ignition switch cycle, a chime will sound, a “service tpm system” message will be displayed for a minimum of five seconds, and the tire pressure m...

  • Page 514

    Tire pressure monitoring low pressure warnings the tire pressure monitoring telltale light will illuminate in the instrument cluster, and an au- dible chime will be activated, when one or more of the four active road tire pressures are low. In addition, the evic will display a “low tire pressure” me...

  • Page 515

    Once the updated tire pressure(s) have been received. The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) to receive this information. Service tpm system warning the tire pressure monitoring telltale light will flash on and off for 75 seconds, and remain on solid when a sys...

  • Page 516

    1. Jamming due to electronic devices or driving next to facilities emitting the same radio frequencies as the tpm sensors. 2. Installing some form of aftermarket window tinting that affects radio wave signals. 3. Lots of snow or ice around the wheels or wheel housings. 4. Using tire chains on the ve...

  • Page 517

    A ⬙ service tpm system ⬙ message for five seconds and then display dashes (- -) in place of the pressure value. Once you repair or replace the original road tire, and reinstall it on the vehicle in place of the spare tire, the tpms will update automatically. In addition, the tire pressure monitoring...

  • Page 518

    5.7l engine this engine is designed to meet all emis- sions regulations and provide satisfactory fuel economy and performance when us- ing high-quality unleaded gasoline having an octane range of 87 to 89. The manufac- turer recommends the use of 89 octane for optimum performance. The use of premium...

  • Page 519

    Gasoline/oxygenate blends some fuel suppliers blend unleaded gasoline with oxy- genates such as ethanol. Fuels blended with oxygenates may be used in your vehicle. Caution! Do not use gasoline containing methanol or gaso- line containing more than 10% ethanol. Use of these blends may result in start...

  • Page 520

    To fix a non-ffv vehicle inadvertently fueled once with e-85 perform the following: • change the engine oil and oil filter • disconnect and reconnect the battery • drain the fuel tank (see your authorized dealer) more extensive repairs will be required for prolonged exposure to e-85 fuel. Mmt in gas...

  • Page 521

    Fuel system cautions caution! Follow these guidelines to maintain your vehicle’s performance: • the use of leaded gas is prohibited by federal law. Using leaded gasoline can impair engine perfor- mance and damage the emissions control system. • an out-of-tune engine or certain fuel or ignition malfu...

  • Page 522

    Carbon monoxide warnings warning! Carbon monoxide (co) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed area, such...

  • Page 523

    The other sections of this manual for information on features that are common between flexible fuel and gasoline-only powered vehicles. Caution! Only vehicles with the e-85 fuel filler door label can operate on e-85. E-85 fuel cap e-85 badge 5 starting and operating 519.

  • Page 524

    Ethanol fuel (e-85) e-85 is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline. Warning! Ethanol vapors are extremely flammable and could cause serious personal injury. Never have any smok- ing materials lit in or near the vehicle when remov- ing the fuel filler tube cap (gas cap)...

  • Page 525

    • some additives used in regular gasoline are not fully compatible with e-85 and may form deposits in your engine. To eliminate driveability issues that may be caused by these deposits, a supplemental gasoline additive, such as mopar 威 injector cleanup or techron may be used. Selection of engine oil...

  • Page 526

    Replacement parts many components in your flexible fuel vehicle (ffv) are designed to be compatible with ethanol. Always be sure that your vehicle is serviced with correct ethanol com- patible parts. Caution! Replacing fuel system components with non-ethanol compatible components can damage your veh...

  • Page 527

    1. Press the fuel filler door release switch (located under the headlamp switch). 2. Open the fuel filler door, and remove the fuel filler cap. Fuel filler door release switch fuel filler cap 5 starting and operating 523.

  • Page 528

    Caution! • damage to the fuel system or emission control system could result from using an improper fuel cap (gas cap). A poorly fitting cap could let impu- rities into the fuel system. Also, a poorly fitting aftermarket cap can cause the “malfunction indi- cator light (mil)” to illuminate, due to f...

  • Page 529

    Note: • when the fuel nozzle “clicks” or shuts off, the fuel tank is full. • tighten the gas cap about one-quarter turn until you hear one click. This is an indication that the cap is properly tightened. • if the gas cap is not tighten properly, the mil will come on. Be sure the gas cap is tightened...

  • Page 530

    Loose fuel filler cap message if the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a loose gascap indicator will display in the evic telltale display area. Refer to “electronic vehicle information center (evic)” in “understanding your instr...

  • Page 531

    Gross axle weight rating (gawr) the gawr is the maximum permissible load on the front and rear axles. The load must be distributed in the cargo area so that the gawr of each axle is not exceeded. Each axle’s gawr is determined by the components in the system with the lowest load carrying capacity (a...

  • Page 532

    Should then be determined separately to be sure that the load is properly distributed over front and rear axle. Weighing the vehicle may show that the gawr of either the front or rear axles has been exceeded, but the total load is within the specified gvwr. If so, weight must be shifted from front t...

  • Page 533

    Trailer towing in this section you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer, carefully review this information to tow your load as efficiently and safely as possible. To maintain warranty coverage, follow t...

  • Page 534

    Warning! If the gross trailer weight is 3,500 lbs (1 587 kg) or more, it is mandatory to use a weight-distributing hitch to ensure stable handling of your vehicle. If you use a standard weight-carrying hitch, you could lose control of your vehicle and cause a collision. Gross combination weight rati...

  • Page 535

    Trailer sway control the trailer sway control can be a mechanical telescoping link that can be installed between the hitch receiver and the trailer tongue that typically provides adjustable fric- tion associated with the telescoping motion to dampen any unwanted trailer swaying motions while traveli...

  • Page 536

    Warning! • an improperly adjusted weight-distributing hitch system may reduce handling, stability, and brak- ing performance, and could result in a collision. • weight-distributing hitch systems may not be compatible with surge brake couplers. Consult with your hitch and trailer manufacturer or a re...

  • Page 537

    With weight-distributing hitch (correct) improper adjustment of weight-distributing hitch (incorrect) 5 starting and operating 533.

  • Page 538

    Trailer hitch classification your vehicle may be factory equipped for safe towing of trailers weighing over 3,500 lbs (1 587 kg) with the optional trailer tow prep package. See your authorized dealer for package content. The following chart provides the industry standard for the maximum trailer weig...

  • Page 539

    Trailer towing weights (maximum trailer weight ratings) the following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/model model gcwr (gross combined wt. Rating) frontal area max. Gtw (gross trailer wt.) max. Trailer tongue wt. (see note) 3.6l 4x2 10,400 ...

  • Page 540

    Trailer and tongue weight always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the gross trailer weight (gtw) on the tow hitch of your vehicle. Loads balanced over the wheels, or heavier in the rear, can cause the trailer to sway severely side-to...

  • Page 541

    Consider the following items when computing the weight on the front/rear axles of the vehicle: • the trailer tongue weight of the trailer. • the weight of any other type of cargo or equipment put in or on your vehicle. • the weight of the driver and all passengers. Note: remember that everything put...

  • Page 542

    Warning! Improper towing can lead to a collision. Follow these guidelines to make your trailer towing as safe as possible: • make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may ...

  • Page 543

    Warning! (continued) 2. Gtw 3. Gawr 4. Trailer tongue weight rating for the trailer hitch utilized (this requirement may limit the ability to always achieve the 10% to 15% range of tongue weight as a percentage of total trailer weight). Towing requirements – tires − do not attempt to tow a trailer w...

  • Page 544

    − an electronically-actuated trailer brake controller is required when towing a trailer with electronically- actuated brakes. When towing a trailer equipped with a hydraulic surge-actuated brake system, an electronic brake controller is not required. − trailer brakes are recommended for trailers ove...

  • Page 545

    Towing requirements – trailer lights and wiring whenever you pull a trailer, regardless of the trailer size, stop lights and turn signals on the trailer are required for motoring safety. The trailer tow package includes a seven–pin connector at the rear of the vehicle and a four-pin harness located ...

  • Page 546

    Towing tips before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic. Automatic transmission the drive range can be selected when towing. How- ever, if frequent shifting occurs while in this range, the tow/haul mode (if equipped), or a lower...

  • Page 547

    The transmission fluid and filter should be changed if you regularly tow a trailer for more than 45 minutes of continuous operation. Refer to “maintenance sched- ule” for the proper maintenance intervals. Note: check the transmission fluid level before towing (5.7l engine). Electronic speed control ...

  • Page 548

    Snow plow snow plows, winches, and other aftermarket equipment should not be added to the front end of your vehicle. The airbag crash sensors may be affected by the change in the front end structure. The airbags could deploy unexpect- edly or could fail to deploy during a collision. Warning! Do not ...

  • Page 549

    Recreational towing (behind motorhome, etc.) towing this vehicle behind another vehicle towing condition wheel off the ground two-wheel drive models four-wheel drive models flat tow none not allowed see instructions • transmission in park • transfer case in neutral (n) • tow in forward direction dol...

  • Page 550

    Recreational towing – two-wheel drive models do not flat tow this vehicle. Damage to the drivetrain will result. Recreational towing (for two-wheel drive models) is allowed only if the rear wheels are off the ground. This may be accomplished using a tow dolly or vehicle trailer. If using a tow dolly...

  • Page 551

    Caution! Towing this vehicle in violation of the above require- ments can cause severe transmission and/or transfer case damage. Damage from improper towing is not covered under the new vehicle limited warranty. Recreational towing – quadra–trac ii 姞 /quadra–drive 姞 ii four-wheel drive models the tr...

  • Page 552

    Caution! (continued) • failure to follow these procedures can cause se- vere transmission and/or transfer case damage. Damage from improper towing is not covered under the new vehicle limited warranty. • do not use a bumper-mounted clamp-on tow bar on your vehicle. The bumper face bar will be damage...

  • Page 553

    Use the following procedure to prepare your vehicle for recreational towing. Caution! It is necessary to follow these steps to be certain that the transfer case is fully in neutral (n) before recreational towing to prevent damage to internal parts. 1. Bring the vehicle to a complete stop and shift t...

  • Page 554

    7. Using the point of a ballpoint pen or similar object, press and hold the recessed transfer case neutral (n) button (located by the selector switch) for four seconds, until the light behind the n symbol starts to blink, indicating shift in progress. The light will stop blinking (stay on solid) whe...

  • Page 555

    Caution! Damage to the transmission may occur if the trans- mission is shifted into park with the transfer case in neutral (n) and the engine running. With the transfer case in neutral (n) ensure that the engine is off prior to shifting the transmission into park. 15. Attach the vehicle to the tow v...

  • Page 556

    3. Turn the ignition switch to the on/run position, but do not start the engine. 4. Press and hold the brake pedal. 5. Shift the transmission into neutral. 6. Using the point of a ballpoint pen or similar object, press and hold the recessed transfer case neutral (n) button (located by the selector s...

  • Page 557

    8. After the neutral (n) button has been released, the transfer case will shift to the position indicated by the selector switch. 9. Shift the transmission into park. 10. Release the brake pedal. 11. Disconnect vehicle from the tow vehicle. 12. Start the engine. 13. Press and hold the brake pedal. 1...

  • Page 559: Contents

    What to do in emergencies contents 䡵 hazard warning flashers . . . . . . . . . . . . . . . . 556 䡵 if your engine overheats . . . . . . . . . . . . . . . . 556 䡵 jacking and tire changing . . . . . . . . . . . . . . . 557 ▫ jack location . . . . . . . . . . . . . . . . . . . . . . . 558 ▫ spare tire...

  • Page 560

    Hazard warning flashers the hazard warning flasher switch is located on the switch bank just above the climate controls. Press the switch to turn on the hazard warning flasher. When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emergency. ...

  • Page 561

    To high. This allows the heater core to act as a supplement to the radiator and aids in removing heat from the engine cooling system. Caution! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads hot (h), pull over and stop the vehicle. Idle the vehicle with th...

  • Page 562

    Warning! (continued) • being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never put any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be ra...

  • Page 563

    Spare tire stowage the spare tire is stowed under the load floor in the rear cargo area and is secured to the body with a special wing nut. Preparations for jacking 1. Park the vehicle on a firm, level surface. Avoid ice or slippery surfaces. Warning! Do not attempt to change a tire on the side of t...

  • Page 564

    7. For vehicle equipped with quadra-lift 威 refer to “quadra-lift — if equipped” in “starting and operat- ing” for further information on disabling automatic leveling. Jacking instructions warning! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle...

  • Page 565

    Caution! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the jacking instructions for this vehicle. 1. Remove the spare tire, jack, and tools from storage. 2. Loosen (but do not remove) the wheel lug nuts by turning them to the left, one turn, while the whee...

  • Page 566

    Caution! Do not attempt to raise vehicle by jacking on loca- tions other than those indicated in the jacking in- structions for this vehicle. 4. For the front axle, place the jack on the body flange just behind the front tire as indicated by the triangular lift point symbol on the sill molding. Do n...

  • Page 567

    5. For a rear tire, place the jack in the slot on the rear tie-down bracket, just forward of the rear tire (as indi- cated by the triangular lift point symbol on the sill molding). Do not raise the vehicle until you are sure the jack is fully engaged. Front jacking location lift point symbol on sill...

  • Page 568

    6. Raise the vehicle by turning the jack screw clockwise. Raise the vehicle only until the tire just clears the surface and enough clearance is obtained to install the spare tire. Minimum tire lift provides maximum stability. Warning! Raising the vehicle higher than necessary can make the vehicle le...

  • Page 569

    Warning! To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. 9. Lower the vehicle by turning the jack screw counter- clockwise, and remove the jack and wheel block...

  • Page 570

    12. Remove the small center cap and securely store the road wheel in the cargo area. 13. Have the aluminum road wheel and tire repaired as soon as possible, properly secure the spare tire with the special wing nut torqued to 3.7 ft-lbs (5 n·m), reinstall the jack and tool kit foam tray, and latch th...

  • Page 571

    Warning! To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. 3. Lower the vehicle to the ground by turning the jack handle counterclockwise. 4. Finish tightening t...

  • Page 572

    Caution! Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 volts or damage to the battery, starter motor, alternator or electrical system may occur. Warning! Do not attempt jump-starting if the battery is frozen. It could rupture or explode ...

  • Page 573

    Warning! • take care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on. You can be injured by moving fan blades. • remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. You could be s...

  • Page 574

    Caution! Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle. 1. Connect the positive (+) end of the jumper cable to the remote positive (+) post of the discharged vehicle. 2. Connect the opposite end of the positive (+) j...

  • Page 575

    8. Disconnect the opposite end of the positive (+) jumper cable from the positive (+) post of the booster battery. 9. Disconnect the positive (+) end of the jumper cable from the remote positive (+) post of the discharged vehicle. 10. Reinstall the protective cover over the remote posi- tive (+) bat...

  • Page 576

    Caution! Racing the engine or spinning the wheels may lead to transmission overheating and failure. Allow the en- gine to idle with the shift lever in neutral for at least one minute after every five rocking-motion cycles. This will minimize overheating and reduce the risk of transmission failure du...

  • Page 577

    Emergency tow hooks — if equipped if your vehicle is equipped with tow hooks, there will be one in the rear and two mounted on the front of the vehicle. The rear hook will be located on the driver’s side of the vehicle. Note: for off-road recovery, it is recommended to use both of the front tow hook...

  • Page 578

    4. Using a screwdriver or similar tool, carefully remove the shift lever override access cover, located on the bottom of the cupholder. 5. Press and maintain firm pressure on the brake pedal. 6. Using the screwdriver or similar tool, press and hold the shift lock lever down. 7. Move the shift lever ...

  • Page 579

    Note: vehicles equipped with quadra-lift™ must be lowered to the park (lowest) level, and have automatic leveling disabled, before tying them down (from the body) on a trailer or flatbed truck. Refer to the section on quadra-lift™ for more information. If the vehicle cannot be lowered to the park le...

  • Page 580

    Proper towing or lifting equipment is required to prevent damage to your vehicle. Use only tow bars and other equipment designed for the purpose, following equip- ment manufacturer’s instructions. Use of safety chains is mandatory. Attach a tow bar or other towing device to main structural members o...

  • Page 581

    If flatbed equipment is not available, and the transmis- sion is operable, the vehicle may be towed (with rear wheels on the ground) with the transmission in neu- tral . Speed must not exceed 30 mph (48 km/h) and the distance must not exceed 15 miles (24 km). Caution! Towing faster than 30 mph (48 k...

  • Page 582

    Caution! • front or rear wheel lifts should not be used. Internal damage to the transmission or transfer case will occur if a front or rear wheel lift is used when towing. • failure to follow these towing methods can cause severe damage to the transmission and/or transfer case. Such damage is not co...

  • Page 583: Maintaining Your Vehicle

    Maintaining your vehicle contents 䡵 engine compartment — 3.6l . . . . . . . . . . . . . 581 䡵 engine compartment — 5.7l . . . . . . . . . . . . . 582 䡵 onboard diagnostic system – obd ii . . . . . . . 583 ▫ loose fuel filler cap message . . . . . . . . . . . 583 䡵 emissions inspection and maintenanc...

  • Page 584

    ▫ cooling system . . . . . . . . . . . . . . . . . . . . . 600 ▫ brake system . . . . . . . . . . . . . . . . . . . . . . . 605 ▫ front/rear axle fluid . . . . . . . . . . . . . . . . . 607 ▫ transfer case . . . . . . . . . . . . . . . . . . . . . . . 608 ▫ automatic transmission . . . . . . . . . ....

  • Page 585

    Engine compartment — 3.6l 1 — totally integrated power module (fuses) 6 — air cleaner filter 2 — engine oil dipstick 7 — washer fluid reservoir 3 — engine oil fill 8 — coolant pressure cap (radiator) 4 — brake fluid reservoir 9 — engine coolant reservoir 5 — power steering fluid reservoir 7 maintain...

  • Page 586

    Engine compartment — 5.7l 1 — totally integrated power module (fuses) 6 — washer fluid reservoir 2 — automatic transmission dipstick 7 — engine oil dipstick 3 — engine oil fill 8 — coolant pressure cap (radiator) 4 — brake fluid reservoir 9 — engine coolant reservoir 5 — air cleaner filter 582 maint...

  • Page 587

    Onboard diagnostic system – obd ii your vehicle is equipped with a sophisticated onboard diagnostic system called obd ii. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide ex...

  • Page 588

    The select button to turn off the message. If the problem continues, the message will appear the next time the vehicle is started. A loose, improperly installed, or damaged fuel filler cap may also turn on the malfunction indicator light (mil). Emissions inspection and maintenance programs in some l...

  • Page 589

    4. Approximately 15 seconds later, one of two things will happen: a. The mil will flash for about 10 seconds and then return to being fully illuminated until you turn off the ignition or start the engine. This means that your vehicle’s obd ii system is not ready and you should not proceed to the i/m...

  • Page 590

    Your vehicle. Refer to these service manuals before attempting any procedure yourself. Note: intentional tampering with emissions control systems may void your warranty and could result in civil penalties being assessed against you. Warning! You can be badly injured working on or around a motor vehi...

  • Page 591

    Caution! (continued) • your vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or ...

  • Page 592

    Change engine oil the oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to “maintenance schedule” for further information. Note: under no circumstances should oil change intervals exceed 8,000 miles (13 000 km) or six months, whichev...

  • Page 593

    Engine oil viscosity – 3.6l engine sae 5w-30 engine oil is recommended for all operating temperatures. This engine oil improves low temperature starting and vehicle fuel economy. The engine oil filler cap also shows the recommended engine oil viscosity for your vehicle. For information on engine oil...

  • Page 594

    Materials added to engine oils do not add any supplemental materials, other than leak detection dyes, to your engine oil. Engine oil is an engineered product and its performance may be im- paired by supplemental additives. Disposing of used engine oil and oil filters care should be taken in disposin...

  • Page 595

    Warning! The air induction system (air cleaner, hoses, etc) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner, hoses, etc.) unless such removal is necessary for repair or maintenance. Make sure that no one is near the engine compa...

  • Page 596

    Warning! (continued) • battery gas is flammable and explosive. Keep flame or sparks away from the battery. Do not use a booster battery or any other booster source with an output greater than 12 volts. Do not allow cable clamps to touch each other. • battery posts, terminals, and related accessories...

  • Page 597

    Air conditioner maintenance for best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt condition should also be checked at t...

  • Page 598

    Note: use only manufacturer approved a/c system sealers, stop leak products, seal conditioners, compres- sor oil, and refrigerants. Refrigerant recovery and recycling r-134a air conditioning refrigerant is a hydrofluoro- carbon (hfc) that is endorsed by the environmental protection agency (epa) and ...

  • Page 599

    Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to remove salt or dirt from a dry windshield. Avoid using the wiper blades to wipe frost or ice from the windshield. Keep the blade rubber out of contact w...

  • Page 600

    3. Grab the bottom of the wiper blade and rotate it forward to unsnap the blade pivot pin from the wiper blade holder. 4. Install the wiper blade pivot pin into the wiper blade holder at the end of the wiper arm, and firmly press the wiper blade until it snaps into place. 5. Lower the wiper blade an...

  • Page 601

    Clean the wiper blades, this will help blade performance. To prevent freeze-up of your windshield washer system in cold weather, select a solution or mixture that meets or exceeds the temperature range of your climate. This rating information can be found on most washer fluid containers. Warning! Co...

  • Page 602

    Warning! • exhaust gases can injure or kill. They contain carbon monoxide (co), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing co, refer to “safety tips/exhaust gas” in “things to know before starting your vehicle” for further...

  • Page 603

    Under normal operating conditions, the catalytic con- verter will not require maintenance. However, it is im- portant to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst damage. Note: intentional tampering with emissions control systems can result in c...

  • Page 604

    Cooling system warning! You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator. If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool. Never try to open a cooling system pressure cap when the radiat...

  • Page 605

    Cooling system – drain, flush, and refill if the engine coolant (antifreeze) is dirty and contains a considerable amount of sediment, clean and flush with reliable cooling system cleaner. Follow with a thorough rinsing to remove all deposits and chemicals. Properly dispose of the old engine coolant ...

  • Page 606

    Caution! (continued) • this vehicle has not been designed for use with propylene glycol-based engine coolant (anti- freeze). Use of propylene glycol-based engine coolant (antifreeze) is not recommended. Adding coolant your vehicle has been built with an improved engine coolant (antifreeze) that allo...

  • Page 607

    Please note that it is the owner’s responsibility to main- tain the proper level of protection against freezing ac- cording to the temperatures occurring in the area where the vehicle is operated. Note: mixing engine coolant (antifreeze) types will decrease the life of the engine coolant (antifreeze...

  • Page 608

    Disposal of used engine coolant used ethylene glycol-based engine coolant (antifreeze) is a regulated substance requiring proper disposal. Check with your local authorities to determine the disposal rules for your community. To prevent ingestion by ani- mals and children, do not store ethylene glyco...

  • Page 609

    If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be safely driven. The vapor will soon dissipate. • do not overfill the coolant recovery bottle. • check engine coolant (antifreeze) freeze point in the radiator and in the coolant recovery bottl...

  • Page 610

    Warning! Riding the brakes can lead to brake failure and possibly a collision. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage. You would not have your full braking capacity in an emergency...

  • Page 611

    Warning! (continued) • to avoid contamination from foreign matter or moisture, use only new brake fluid or fluid that has been in a tightly closed container. Keep the master cylinder reservoir cap secured at all times. Brake fluid in a open container absorbs moisture from the air resulting in a lowe...

  • Page 612

    Front axle fluid level check the front axle oil level needs to be between 1/8 in (3 mm) below the bottom of the fill hole and the bottom of the fill hole. The front axle fill and drain plugs should be tightened to 22 to 29 ft lbs (30 to 40 n·m). Caution! Do not over tighten the plugs as it could dam...

  • Page 613

    Transfer case. The fluid level should be at the bottom edge of the filler plug hole when the vehicle is in a level position. Adding fluid add fluid at the filler hole, until it runs out of the hole, when the vehicle is in a level position. Drain first remove fill plug, then remove drain plug. Recom-...

  • Page 614

    Caution! Using a transmission fluid other than the manufac- turer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder. Using a transmission fluid other than the manufacturer’s recommended fluid will require more frequent fluid and filter changes....

  • Page 615

    Caution! • using a transmission fluid other than the manu- facturer’s recommended fluid may cause deterio- ration in transmission shift quality and/or torque converter shudder. Using a transmission fluid other than that recommended by the manufacturer will require more frequent fluid and filter chan...

  • Page 616

    6. Remove the dipstick again, and note the fluid level on both sides. The fluid level should be between the “hot” (upper) reference holes on the dipstick at normal operat- ing temperature. The fluid level is only valid if there is a solid coating of oil on both sides of the dipstick. If the fluid is...

  • Page 617

    Passable in snow and ice, and those that are sprayed on trees and road surfaces during other seasons, are highly corrosive to the metal in your vehicle. The following maintenance recommendations will enable you to obtain maximum benefit from the corrosion resistance built into your vehicle. What cau...

  • Page 618

    Caution! • do not use abrasive or strong cleaning materials such as steel wool or scouring powder, which will scratch metal and painted surfaces. • use of power washers exceeding 1,200 psi (8 274 kpa) can result in damage or removal of paint and decals. Special care • if you drive on salted or dusty...

  • Page 619

    Wheel and wheel trim care • all wheels and wheel trim, especially aluminum and chrome plated wheels, should be cleaned regularly with a mild soap and water to prevent corrosion. • to remove heavy soil and/or excessive brake dust, use mopar 威 wheel cleaner or equivalent or select a non-abrasive, non-...

  • Page 620

    Interior care use mopar 威 total clean or equivalent to clean fabric upholstery and carpeting. Interior trim should be cleaned starting with a damp cloth, a damp cloth with mopar 威 total clean or equiva- lent, then mopar 威 spot & stain remover or equivalent, if absolutely necessary. Do not use harsh ...

  • Page 621

    To minimize the possibility of scratching the lenses and reducing light output, avoid wiping with a dry cloth. To remove road dirt, wash with a mild soap solution fol- lowed by rinsing. Do not use abrasive cleaning components, solvents, steel wool or other aggressive material to clean the lenses. Gl...

  • Page 622

    Replace the belts if they appear frayed or worn or if the buckles do not work properly. Fuses totally integrated power module the totally integrated power module is located in the engine compartment. This center contains cartridge fuses and mini fuses. A description of each fuse and compo- nent may ...

  • Page 623

    Cavity cartridge fuse mini fuse description j03 30 amp pink trailer tow j04 25 amp natural driver door node j05 25 amp natural passenger door node j06 40 amp green antilock brakes pump/stability control system j07 30 amp pink antilock brakes valve/stability control system j08 40 amp green power seat...

  • Page 624

    Cavity cartridge fuse mini fuse description j18 20 amp blue powertrain control module/powertrain control module transmission range j19 60 amp yellow radiator fan motor hi/radiator fan motor low j20 30 amp pink front wiper j21 20 amp blue front/rear washer control j22 25 amp natural sunroof module m1...

  • Page 625

    Cavity cartridge fuse mini fuse description m11 10 amp red heating, ventilation & air conditioning (climate control system) m12 30 amp green radio/amplifier m13 20 amp yellow instrument cluster m14 20 amp yellow back up camera – if equipped cavity cartridge fuse mini fuse description m15 20 amp yell...

  • Page 626

    Cavity cartridge fuse mini fuse description m21 20 amp yellow automatic shut- down 3 m22 10 amp red horns (low/high) – right m23 10 amp red horns (low/high) – left m24 25 amp natural rear wiper m25 20 amp yellow fuel pump motor output/diesel lift pump (export only) m26 10 amp red driver door switch ...

  • Page 627

    Cavity cartridge fuse mini fuse description m33 10 amp red powertrain controller/ transmission con- troller m34 10 amp red park assist module/climate control system module/infra red sensor/compass module m35 15 amp blue left rear parklamps m36 20 amp yellow power outlet m37 10 amp red antilock brake...

  • Page 628

    Caution! (continued) • when replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system over- load. If a properly rated fuse continues to blow, it indicates a problem i...

  • Page 629

    Exterior lights bulb type headlamps (low beam) . . . . . . . . . . . . . . . . . . . H11 headlamps (high beam) . . . . . . . . . . . . . . . . . . 9005 headlamps (low beam) – high intensity discharge (hid) . . . . . . . . . . D1s (serviced at authorized dealer) front park/turn lamp . . . . . . . . ....

  • Page 630

    Note: on vehicles equipped with high intensity dis- charge (hid) headlamps, when the headlamps are turned on, there is a blue hue to the lamps. This dimin- ishes and becomes more white after approximately 10 seconds, as the system charges. Halogen headlamps – if equipped 1. Open the hood. 2. Turn th...

  • Page 631

    Caution! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. Front fog lamps 1. Reach through the cutout in the splash shield and disconnect the wiring harness from th...

  • Page 632

    6. Firmly and evenly push the bulb straight into the lamp housing until both tabs snap firmly into place and are fully engaged. 7. Connect the wiring harness to the front fog lamp connector. Rear tail, stop, turn signal, and backup lamps 1. Raise the liftgate. 2. Remove the two push-pins from the ta...

  • Page 633

    6. Replace the bulb, reinstall the socket, and reattach the lamp assembly. Rear liftgate mounted tail lamp 1. Raise the liftgate. 2. Use a fiber stick or flat blade screw driver to pry the lower trim from the liftgate. 3. Once lower trim is loose, close the liftgate. 4. Open the flipper glass. 5. Pu...

  • Page 634

    Center high-mounted stop lamp (chmsl) the center high-mounted stop lamp is an led assembly. See your authorized dealer for replacement. Rear license lamp 1. Use a screw driver to gently pry against the side of the snap tab to remove the license lamp lens. 2. Pull bulb from socket. 3. Replace bulb. 4...

  • Page 635

    Fluid capacities u.S. Metric fuel (approximate) all engines 24.6 gallons 93 liters engine oil with filter 3.6l engine (sae 5w-30, api certified) 6 quarts 5.6 liters 5.7l engine (sae 5w-20, api certified) 7 quarts 6.6 liters cooling system * 3.6l engine (mopar 威 engine coolant/antifreeze 5-year/100,0...

  • Page 636

    Fluids, lubricants, and genuine parts engine component fluid, lubricant, or genuine part engine coolant mopar 威 antifreeze/coolant 5 year/100,000 mile formula hoat (hy- brid organic additive technology) or equivalent. Engine oil – 3.6l engine use api certified sae 5w-30 engine oil, meeting the requi...

  • Page 637

    Chassis component fluid, lubricant, or genuine part automatic transmission mopar 威 atf+4 威 automatic transmission fluid or equivalent licensed atf+4 威 product. Transfer case – 3.6l engine shell automatic transmission fluid 3353 or equivalent. Transfer case – 5.7l engine mopar 威 atf+4 威 automatic tra...

  • Page 638

    Component fluid, lubricant, or genuine part power steering reservoir – 3.6l en- gine mopar 威 hydraulic fluid or equivalent meeting ms-11655, such as fuchs eg zh 3044 or pentosin chf 11s. Power steering reservoir – 5.7l en- gine mopar 威 power steering fluid +4, mopar 威 atf+4 威 automatic trans- missio...

  • Page 639: Maintenance Schedules

    Maintenance schedules contents 䡵 maintenance schedule . . . . . . . . . . . . . . . . . . 636 ▫ required maintenance intervals . . . . . . . . . . 638 8 m a i n t e n a n c e s c h e d u l e s.

  • Page 640

    Maintenance schedule the scheduled maintenance services listed in this manual must be done at the times or mileages specified to protect your vehicle warranty and ensure the best vehicle performance and reliability. More frequent main- tenance may be needed for vehicles in severe operating condition...

  • Page 641

    Note: • the oil change indicator message will not monitor the time since the last oil change. Change your vehicle’s oil if it has been six months since your last oil change, even if the oil change indicator message is not illuminated. • change your engine oil more often if you drive your vehicle off...

  • Page 642

    Once a month • check tire pressure and look for unusual wear or damage. • check the fluid levels of the coolant reservoir, brake master cylinder, power steering and transmission (5.7l only) and add as needed. • check all lights and other electrical items for correct operation. At each oil change • c...

  • Page 643

    8,000 miles (13,000 km) or 6 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 8,000 miles (13 000 km). Odometer reading date repair order # dealer code signature, authorized ser...

  • Page 644

    24,000 miles (39,000 km) or 18 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 24,000 miles (39 000 km). ❏ inspect the cv joints. ❏ inspect exhaust system. ❏ inspect the front ...

  • Page 645

    40,000 miles (65,000 km) or 30 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 40,000 miles (65 000 km). Odometer reading date repair order # dealer code signature, authorized ...

  • Page 646

    56,000 miles (91,000 km) or 42 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 56,000 miles (91 000 km). Odometer reading date repair order # dealer code signature, authorized ...

  • Page 647

    64,000 miles (104,000 km) or 48 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 64,000 miles (104 000 km). ❏ replace the engine air cleaner filter. ❏ replace the air conditioni...

  • Page 648

    72,000 miles (117,000 km) or 54 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 72,000 miles (117 000 km). ❏ inspect the cv joints. ❏ inspect exhaust system. ❏ inspect the fron...

  • Page 649

    88,000 miles (143,000 km) or 66 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 88,000 miles (143 000 km). Odometer reading date repair order # dealer code signature, authorize...

  • Page 650

    96,000 miles (156,000 km) or 72 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 96,000 miles (156 000 km). ❏ replace the engine air cleaner filter. ❏ replace the air conditioni...

  • Page 651

    104,000 miles (169,000 km) or 78 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 104,000 miles (169 000 km). ❏ flush and replace the engine coolant at 104,000 miles (169 000 km...

  • Page 652

    120,000 miles (195,000 km) or 90 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 120,000 miles (195 000 km). ❏ inspect the cv joints. ❏ inspect exhaust system. ❏ inspect the fr...

  • Page 653

    128,000 miles (208,000 km) or 96 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 128,000 miles (208 000 km). ❏ replace the engine air cleaner filter. ❏ replace the air conditio...

  • Page 654

    144,000 miles (234,000 km) or 108 months maintenance service schedule ❏ change the engine oil and engine oil filter. ❏ rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 144,000 miles (234 000 km). ❏ if using your vehicle for any of the following: dusty or off-roa...

  • Page 655

    Warning! • you can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. • failure to properly inspect and mai...

  • Page 657: Contents

    If you need consumer assistance contents 䡵 suggestions for obtaining service for your vehicle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 655 ▫ prepare for the appointment . . . . . . . . . . . 655 ▫ prepare a list . . . . . . . . . . . . . . . . . . . . . . 655 ▫ be reasonable with r...

  • Page 658

    䡵 department of transportation uniform tire quality grades . . . . . . . . . . . . . . . . . . . . . . . . 660 ▫ treadwear . . . . . . . . . . . . . . . . . . . . . . . . . 661 ▫ traction grades . . . . . . . . . . . . . . . . . . . . . 661 ▫ temperature grades . . . . . . . . . . . . . . . . . . 66...

  • Page 659

    Suggestions for obtaining service for your vehicle prepare for the appointment if you’re having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty. Discuss additional charges with the service manager. ...

  • Page 660

    This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • if for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealer- ship. They want to know if you need assistance. • if ...

  • Page 661

    Customer assistance for the hearing or speech impaired (tdd/tty) to assist customers who have hearing difficulties, the manufacturer has installed special tdd (telecommuni- cation devices for the deaf) equipment at its customer center. Any hearing or speech impaired customer, who has access to a tdd...

  • Page 662

    We appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience. You’ll be pleased with their sincere efforts to reso...

  • Page 663

    If nhtsa receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, nhtsa cannot become involved in individual problems between you, your authorized dealer, and the manufacturer. T...

  • Page 664

    Llc vehicles. A complete working knowledge of the vehicle, system, and/or components is written in straightforward language with illustrations, diagrams, and charts. • diagnostic procedure manuals diagnostic procedure manuals are filled with dia- grams, charts and detailed illustrations. These pract...

  • Page 665

    In each category is shown on the sidewall of the tires on your vehicle. All passenger car tires must conform to federal safety requirements in addition to these grades. Treadwear the treadwear grade is a comparative rating, based on the wear rate of the tire when tested under controlled conditions o...

  • Page 666

    Grade c corresponds to a level of performance, which all passenger car tires must meet under the federal motor vehicle safety standard no. 109. Grades b and a repre- sent higher levels of performance on the laboratory test wheel, than the minimum required by law. Warning! The temperature grade for t...

  • Page 667: Index

    Index 10

  • Page 668

    Adaptive cruise control (acc) (cruise control) . . 200 adding fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 522 additives, fuel . . . . . . . . . . . . . . . . . . . . . . . . . 516 air cleaner, engine (engine air cleaner filter) . . . 590 air conditioner maintenance . . . . . . . . . ....

  • Page 669

    Fluid level check . . . . . . . . . . . . . . . . . 610,611 fluid type . . . . . . . . . . . . . . . . . . . . . . . . . 609 special additives . . . . . . . . . . . . . . . . . . . . . 610 autostick . . . . . . . . . . . . . . . . . . . . . . . . . . . 431,440 auxiliary electrical outlet (power outl...

  • Page 670

    Cargo area features . . . . . . . . . . . . . . . . . . . . . . 269 cargo compartment . . . . . . . . . . . . . . . . . . . . . . 269 light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270 cargo light . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270 cargo tie-downs . . . . . ...

  • Page 671

    Coolant capacity . . . . . . . . . . . . . . . . . . . . . 631 coolant level . . . . . . . . . . . . . . . . . . . . . . . 604 disposal of used coolant . . . . . . . . . . . . . . . 604 drain, flush, and refill . . . . . . . . . . . . . . . . 601 inspection . . . . . . . . . . . . . . . . . . . . . ...

  • Page 672

    Electronic brake control system . . . . . . . . . . . . . 469 anti-lock brake system . . . . . . . . . . . . . . . . 470 brake assist system . . . . . . . . . . . . . . . . . . . 471 electronic roll mitigation . . . . . . . . . . . . . . . 472 traction control system . . . . . . . . . . . . . . . . ...

  • Page 673

    Temperature gauge . . . . . . . . . . . . . . . . . . . 296 engine oil viscosity . . . . . . . . . . . . . . . . . . . . . . 589 engine oil viscosity chart . . . . . . . . . . . . . . . . . 589 enhanced accident response feature . . . . . . . . . . 77 entry system, illuminated . . . . . . . . . . . ...

  • Page 674

    Fog lights . . . . . . . . . . . . . . . . . . . . . . . . . . 289,627 folding rear seat . . . . . . . . . . . . . . . . . . . . . . . . 171 forward collision warning . . . . . . . . . . . 224,308,329 four wheel drive . . . . . . . . . . . . . . . . . . . . . 444,450 operation . . . . . . . . . . . ...

  • Page 675

    Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 295 speedometer . . . . . . . . . . . . . . . . . . . . . . . . 294 tachometer . . . . . . . . . . . . . . . . . . . . . . . . . 287 gear ranges . . . . . . . . . . . . . . . . . . . . . . . . 426,434 gear select lever override . . . ....

  • Page 676

    Information center, vehicle . . . . . . . . . . . . . . . . . 296 inside rearview mirror . . . . . . . . . . . . . . . . . . . 108 instrument cluster . . . . . . . . . . . . . . . . . . . . 286,287 instrument panel and controls . . . . . . . . . . . . . . 285 instrument panel lens cleaning . . . . ....

  • Page 677

    Anti-lock . . . . . . . . . . . . . . . . . . . . . . . . . . 294 automatic headlights . . . . . . . . . . . . . . . . . 181 back-up . . . . . . . . . . . . . . . . . . . . . . . . . . . 628 brake assist warning . . . . . . . . . . . . . . . . . . 481 brake warning . . . . . . . . . . . . . . . . . ...

  • Page 678

    Loading vehicle . . . . . . . . . . . . . . . . . . . . . . . . . 526 tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 488 locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 automatic door . . . . . . . . . . . . . . . . . . . . . . 35 child protection . . . ...

  • Page 679

    New vehicle break-in period . . . . . . . . . . . . . . . . 95 occupant restraints . . . . . . . . . . . . . . . . . . . 49,73,78 occupant restraints (sedan) . . . . . . . . . . . 70,71,73,76 odometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289 trip . . . . . . . . . . . . . . . . ...

  • Page 680

    Pets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 pets, transporting . . . . . . . . . . . . . . . . . . . . . . . . 95 phone, cellular . . . . . . . . . . . . . . . . . . . . . . . . . 121 phone, hands-free (uconnect™) . . . . . . . . . . . . . 121 placard, tire and loadin...

  • Page 681

    Rear wiper/washer . . . . . . . . . . . . . . . . . . . . . . 275 rearview mirrors . . . . . . . . . . . . . . . . . . . . . . . . 108 reclining front seats . . . . . . . . . . . . . . . . . . . . . 162 recorder, event data . . . . . . . . . . . . . . . . . . . . . . 81 recreational towing . . . . ....

  • Page 682

    Child restraint . . . . . . . . . . . . . . . . . . . . . 82,91 extender . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 front seat . . . . . . . . . . . . . . . . . . . . . . . . . . 52 inspection . . . . . . . . . . . . . . . . . . . . . . . . . . 98 maintenance . . . . . . . . . . . . . ...

  • Page 683

    Snow chains (tire chains) . . . . . . . . . . . . . . . . . 501 snow plow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 544 snow tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . 503 spare tire . . . . . . . . . . . . . . . . . . . . . . . 496,497,559 specifications fuel (gasol...

  • Page 684

    Temperature control, automatic (atc) . . . . . . . . 402 temperature gauge, engine coolant . . . . . . . . . . 296 tether anchor, child restraint . . . . . . . . . . . . . . . 86 tie down hooks, cargo . . . . . . . . . . . . . . . . . . . 273 tilt steering column . . . . . . . . . . . . . . . . . . ...

  • Page 685

    Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 535 recreational . . . . . . . . . . . . . . . . . . . . . . . . 545 weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 535 towing assistance . . . . . . . . . . . . . . . . . . . . . . . 135 traction control . . . . . . . ....

  • Page 686

    Vehicle certification label . . . . . . . . . . . . . . . . . 526 vehicle identification number (vin) . . . . . . . . . . . . 8 vehicle loading . . . . . . . . . . . . . . . . . . . . . . 489,526 vehicle modifications/alterations . . . . . . . . . . . . . . 9 vehicle storage . . . . . . . . . . . . ...

  • Page 687

    Installation of radio transmitting equipment special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained personnel. The following must be obser...

  • Page 688

    Chrysler group llc 12 wk741-126-ad 4th edition p rinted in u.S.A..