Jeep grand cherokee 2018 Quick Reference Manual - page 14
Memory Seats
The memory seat feature allows you to set two
different driver’s seating positions (excluding
lumbar position), outside mirrors, radio station
preset settings and tilt/telescoping steering col-
umn positions (if equipped). The memory seat
buttons are located on the driver’s door panel.
To Set A Memory Position:
1. Cycle the vehicle’s ignition to the ON/RUN
position (Do not start the engine).
2. Adjust all memory profile settings.
3. Push and release the S (set) button.
4. Push and release the 1 or 2 button within
five seconds.
To Program A Key Fob To The Memory Position:
1. Cycle the vehicle’s ignition to the OFF posi-
tion.
2. Select the desired memory profile, 1 or 2.
3. Push and release the S (set) button on the
memory switch, then within five seconds,
press and release the 1 or 2 button accord-
ingly.
4. Push and release the lock button on the key
fob within 10 seconds.
NOTE:
Memory seats can be programmed/stored while
the engine is running.
For further information, and applicable warn-
ings and cautions, please refer to the Owner’s
Manual
at
www.mopar.com/en-us/care/
owners-manual.html
(U.S.
Residents)
or
www.owners.mopar.ca (Canadian Residents).
Memory Seat Buttons
SEATS