Kaba Mas 1F Operating Instructions Manual - Sing
9
U
SING
THE
X-09
If you have not read the section on “Dialing the X-09”, it is important that
you do so before proceeding.
SINGLE COMBINATION MODE
In this mode the X-09 functions much like a standard combination lock. It will open any time
the three-number combination is correctly dialed.
1. Dial left (CCW) until lock is “powered”.
2. Dial the combination in the correct manner to open the lock; i.e., left (CCW) to dial
the fi rst number, right (CW) to dial the second number, left (CCW) to dial the third
number.
EXAMPLE: Combination = 30-60-90
Dial left to the fi rst number, 30. Stop.
Dial right to second number, 60. Stop.
Dial left to third number, 90. Stop.
3. Dial
right (CW). After OP with a right arrow (OPen right) is displayed, continue dialing
to the right to retract the lock bolt.
Note: If at any time the dial remains stationary for more than 40 seconds, the
lock will reset (LCD will go blank) requiring the operator to redial the entire
combination.
DUAL COMBINATION MODE
In this mode, two combinations must be correctly and consecutively entered to open the
lock. Either combination may be entered fi rst; however, the second combination must be
started within 40 seconds after the fi rst combination is completed.
First Operator:
1. Dial left (CCW) until lock is “powered”.
2. Dial the fi rst combination in the correct manner to open the lock; i.e., left (CCW) to
dial the fi rst number, right (CW) to dial the second number, left (CCW) to dial the third
number.
EXAMPLE: Combination = 25-50-75
Dial left to fi rst number, 25. Stop.
Dial right to second number, 50. Stop.
Dial left to third number, 75. Stop.
3. Dial to the right (CW) until C2 (enter Combination 2) is displayed.
Second Operator:
4. Dial
the
second combination in the correct manner to open the lock; i.e., left (CCW)
to dial the fi rst number, right (CW) to dial the second number, left (CCW) to dial the
third number.
EXAMPLE: Combination = 30-60-90
Dial left to fi rst number, 30. Stop.
Dial right to second number, 60. Stop.
Dial left to third number, 90. Stop.
5. Dial
right (CW). After OP with a right arrow (OPen right) is displayed, continue dialing
to the right to retract the lock bolt.