Kaffee Konzepte OLC1 Series ‘Lucia’ Users Handbooks - Dispenser Calibrate Mode:
OC Series - Automatic coffee machines
- 7 -
6. Press the ‘STOP’ button to step to the coffee strength setting
The display will show
Strength =
XX : 1
XX is a number between 10 and 50
The strength is expressed as a ratio of water to coffee concentrate e.g.
25:1 equals 25 parts water to 1 part coffee concentrate.
Press the ‘CUP’ button (-) to lower the ratio which will increase the
strength of the drink dispensed, or the ‘MUG’ button (+) to increase the
ratio which will decrease the strength of the drink dispensed.
For example 20:1 is stronger than 30:1
Dispenser Calibrate mode:
1. Switch on the dispenser and let it run until the heaters turn off and the
water is hot.
2. Switch off the dispenser with the red power button on the rear of the
dispenser,
3. Wait 2 seconds, then press and hold down the ‘STOP’ button and
switch the dispenser back on again.
The display will show
Setup
Press Selection
4. Press the ‘Jug’ Button
The display will show
Jug enabled
Set to Jug enabled
Release the Stop button
and the display will change
to:-
Pressing the ‘Jug’ button
toggles between enabled
and disabled.