KAL-FIRE Heat Pure Series 105T Installation & User Manual - page 45
of
72
5. Lighting the fireplace
42
5.5.3
Igniting the Heat Pure 105 Tunnel
Place a log on the base of the
appliance with some finely chopped
wood on both sides.
Place 2 logs diagonally on top of the
wood, together with a few firelighters.
Use the operating key to open the air
regulation completely. (position on
the extreme right).
Ignite the firelighters using a long
match. Leave the door slightly open
(1-2 cm) for a couple of minutes.
When there is a glowing bed,
distribute the glowing ashes using a
poker. Now add more wood (see
section 5.6.