KAL-FIRE Heat Pure Series 105T Installation & User Manual - page 5
2. Safety
2
2
Safety
2.1
CE-marking
The appliance has been approved according to the CE standard EN-
13229-A2.
Every appliance that leaves the factory has been tested for functionality
according to the Kal-fire quality standards.
National and local building and fire regulations apply to the
Heat Pure. Both local and national requirements must be
respected.
The relevant local authorities must be notified before
adding the external elements to the fireplace insert in
order to verify the quality of the installation.
2.2
Safety instructions installer
•
An authorised installer will connect the Heat Pure in
compliance with the national and/or local applicable
regulations.
•
Check if the Heat Pure functions correctly immediately
after the installation.
•
Take the necessary preventive measures, by using non-
combustible material, in order to prevent overheating of
floor, boards or walls close to the Heat Pure.