KAL-FIRE Heat Pure Series 105T Installation & User Manual - page 52
6. Maintenance
49
6.2
Cleaning the pane
Heat Pure 65 corner right and left
Heat Pure 90 corner right and left
1.
Before you are going to clean the glass,
it has to be completely cooled down, to
prevent damage.
2.
Press the complete lifting door down
firmly.
3.
To open the door use the lever (see
picture).
4.
Pull down the lever until it is in a
vertical position.
5.
The door is released and can be moved
forward (see image). Take hold of the
door on and gently pull it forward.
6.
Use a cloth or piece of paper to remove
the worst soiling from the glass.
7.
Spray the detergent onto a cloth or
piece of paper and wipe the glass clean.
Never spray the cleaning agent directly
onto the glass.
8.
Wipe over the glass with a damp cloth
afterwards, to remove all traces of the
detergent used.
9.
To close the door, gently push back the
glass. Turn back the lever in its original
horizontal position.
10.
Close the flap (see last picture).
lever
flap