1. DL manuals
  2. KAM
  3. DJ Equipment
  4. KSM Vegas LED
  5. Instruction Manual

KAM KSM Vegas LED Instruction Manual

Summary of KSM Vegas LED

  • Page 1

    Ksm vegas led high power smoke machine with multicolour led fx due to continuous product development, please ensure that you have downloaded the latest instruction manual for this product from the kam website at www.Kam.Co.Uk m a n u a l v e r s i o n 1 . 0 1 8 - 1 0 - 1 3 for the latest updates and...

  • Page 2

    Thank you for purchasing this kam product, we are sure that it will serve you for many years to come. To optimise the performance of this product, please read these operating instructions carefully to familiarise yourself with the basic operations of this unit. Please retain them for future referenc...

  • Page 3

    Safety instructions please read the following notes carefully because they include important safety information regarding this product. 1. Always plug in the power plug last and disconnect from the mains when the device is not in use or before cleaning. 2. Do not install and operate the device in ra...

  • Page 4

    Remote control pairing if for some reason the remote control and smoke machine aren’t ‘communicating’ you may need to re-pair the two. Start by turning the smoke machine off for ten seconds, then turn on the unit, whilst the unit is starting up, press and hold down either button on the remote contro...

  • Page 5

    Dmx512 operation the smoke machine is equipped with 8 control channels. To be able to operate the machine with a dmx controller, the dmx starting address must be set for the first dmx channel. To achieve this, press the button menu so many times until “addr“ is indicated in the display. Then press e...

  • Page 6

    Fluid sensor on and off to protect the pump, the machine uses a infrared fluid sensor to test if there is smoke fluid in the tube. If the sensor detects that there is not enough fluid in the tube, the machine will enter a protection mode after about 20 seconds and it will shut the pump down. The dis...

  • Page 7

    Trouble shooting symptom solution no power check mains power. Check external fuse. Check internal fuse. No smoke output check fluid level. Check remote. If using wireless remote contol, check batteries. Breaker/fuse keeps blowing possible electrical short. Contact retailer/distributor for further in...