KAM KSM Vegas LED Instruction Manual - page 7
Trouble shooting
Symptom
Solution
No Power
Check mains power.
Check external fuse.
Check internal fuse.
No smoke output
Check fluid level.
Check remote.
If using wireless remote contol, check batteries.
Breaker/fuse keeps blowing
Possible electrical short. Contact retailer/distributor for further instructions.
Low smoke output
Run a cleaning solution through the smoke machine.
Check that the smoke machine is plugged into the correct voltage.
Smoke machine is not heating up
Check the external fuse.
Check the internal fuse.
Possible faulty part. Contact your retailer/distributor for further instructions.
Remote control does not work
Check batteries in remote controller.
Try using another controller.
Possible faulty controller.
Check the internal fuse.
Check the external fuse.
Fluid indicator states no smoke
but the container if full
Try resetting the smoke machine by turning the power off and then on again.
Possible faulty part. Contact retailer/distributor for further instructions.
Specifications and features
Model
Kam KSM Vegas LED
Power supply
230V AC - 50Hz
Power
1500W
Fuse
F7A
Re-heat time
Approximately 4 minutes
Numbers of LEDs
21
LED type
3w
Output
40,000 CuFt per minute
DMX control channels
8
Tank capacity
2.5 Litres
Manual remote
Yes (optional)
Wireless remote
Yes
Gross weight
8.49kg