KAM Laserscan 300 3D Instruction Manual - page 6
DMX address
Each unit uses 17 DMX channels. To select the desired DMX address press the menu button until DMX mode is displayed, then
press the enter button to access the DMX channel menu.
This example shows how to set the start address to 001 but use the same formula to set address at different numbers.
At the top of the menu address #*** is displayed, use the up down buttons until 001 is shown and press the enter button to confirm.
Now this unit has the DMX starting address of 001. If all units are to be controlled exactly the same set all units to address 001.
If individual control of units is required each unit must have its own starting address and must be at least 17 channels apart . None
of the channels must cross. E.g. Set the first unit to 001 the second unit to 018 and so on each unit is 17 channels apart. Now the
DMX controller will control all the units seperatley.
SLAVE MODE
Press FUNC to enter the MODE selection
Use the up/down buttons to select SLA for Slave mode
Press ENTER to confirm the setting
Now the laser is working in SLAVE MODE. Connect the MASTER laser with several SLAVE lasers using a DMX cable. The SLAVE
lasers will produce exactly the same laser show as MASTER laser.
REM MODE (Remote Optional)
Press FUNC to enter the MODE selection
Use the up/down buttons to select REM for Remote mode
Press ENTER to confirm the setting
Please check Remote Instruction for remote control details.
Note: In any standalone mode (except REM and SLA), press ON/OFF for 2 seconds to activate the remote function.
PATTERN MIRROR REVERSE SETTING
This has no real purpose on this type of image laser
FIG.A>
Press FUNC to enter the MODE selection
Use the up/down buttons to set the LED display to
Match Fig A.
Press ENTER to confirm the setting.
FIG.B>
Using the up/down buttons, set the LED display to match
Fig. B. This will rotate the graphic in the X direction.
FIG.C>
Using the up/down buttons, set the LED display to match
Fig. C. This will flip the graphic in the Y direction.