KAM Laserscan 300 3D Instruction Manual - page 8
DMX Channels Chart
Channel
Value
Function
CH 1 – Mode
000-063 Laser OFF
064-127
Auto mode
128-191 Sound mode
192-255 DMX MODE
CH 2 - Group
000-051 1 Group Patterns.
052-103 2 Group Patterns.
104-155 3 Group Patterns.
156-207 4 Group Patterns.
208-255 5 Group Patterns.
CH 3 - Pattern
000-255 Every 16 for 1 Group, total 80 patterns.
CH 4 - Colour
000-007 Original pre-programmed colour
008-015 Red
016-023 Green
024-031 Yellow
032-039 Blue
040-047
Purple
048-055 Light Blue
056-063 White
064-111 Colour Rolling
112-159 Colour Jumping
160-127 Colour Moving
208-255 Strobing
CH 5 - Clipping
000
Full pattern without clipping
001-127 0%~99% fixed pattern clipped
128-255 Clipping Speed
CH 6 - Zooming
000-127 100%-5% fixed pattern zoomed
128-169 Zooming IN
170-209 Zooming OUT
210-255 Alternately Zooming
CH 7 – Zoom speed
000-255 Fast to Slow
CH 8 – Y Axis rolling
000-127 0 -359 degree fixed Y axis rolled
128-191 Clockwise rolling
192-255 Anticlockwise rolling
CH 9 – Roll speed
0-255
Fast to Slow
CH 10 – X Axis rolling
000-127 0 -359 degree fixed X axis rolled
128-191 Clockwise rolling
192-255 Anticlockwise rolling
CH 11 – Roll speed
0-255
Fast to Slow
CH 12 – Z Axis Rolling
000-127 0 -359 degree fixed Z axis rolled
128-191 Clockwise rolling
192-255 Anticlockwise rolling
CH 13 – Roll speed
0-255
Fast to Slow
CH 14 – Y Axis moving
000-127 128 different fixed position on X axis
128-191 Clockwise moving
192-255 Anticlockwise moving
CH 15 – Move speed
0-255
Fast to Slow
CH 16 – X Axis moving
000-127 128 different fixed position on Y axis
128-191 Clockwise moving
192-255 Anticlockwise moving
CH 17 – Move speed
0-255
Fast to Slow