KanexPro MX-HDBASE4x4-4k User Manual - Kanexpro
KANEXPRO
MX-HDBASE4x4-4k
7 |
P a g e
3.4
Connection Procedure
1)
Connect HDMI sources (e.g. DVD) to HDMI inputs of the MX-HDBASE4X4-4K with
HDMI cables.
2)
Connect auxiliary audio sources to the AUDIO IN ports with audio cables.
3)
Connect HDBaseT receivers (e.g. TPHD402PR) to the HDBaseT Output ports with
twisted pair.
4)
Connect HDMI displays (e.g. HDTV) to HDMI outputs of the MX-HDBASE4X4-4K or
the receivers with HDMI cables
5)
Connect speakers/earphones to AUDIO output ports
6)
Connect the RS232 port of control device (e.g. a PC) to the RS232 port of either
MX-HDBASE4X4-4K or far-end receivers. RS232 signal can be transmitted bi-
directionally between MX-HDBASE4X4-4K and far-end receivers.
7)
MX-HDBASE4X4-4K can collect IR signal sent by the included IR remote via its
built-in IR sensor or through external IR receiver connected to the IR IN/ IR EYE/ IR
ALL IN port. The IR signal can be transmitted bi-directionally between MX-
HDBASE4X4-4K and far-end receivers.
8)
Connect a DC 24V power adapter and the MX-HDBASE4X4-4K.
Note:
1.
Connect HDBT ports of MX-HDBASE4X4-4K and far-end receiver with straight-
through cable.
2.
IR receivers connected to IR IN& IR ALL IN should be with carrier. If not, send
command %0900. or %0901.to activate native carrier mode or force carrier mode
in the IR matrix launched between MX-HDBASE4X4-4K and far-end receivers.
3.5
Connection with HDBASE70POER
MX-HDBASE4X4-4K boasts 4 HDBaseT output ports which support PoC solution.
Connect the HDBT output ports of MX-HDBASE4X4-4K to HDBaseT Receivers
supporting PoC (like HDBASE70POER) via twisted pair. Plug a power supply to the
power port of MX-HDBASE4X4-4K, the HDBaseT Receivers will be energized
synchronously with PoC solution.