KanexPro MX-HDBASE4x4-4k User Manual - Kanexpro
KANEXPRO
MX-HDBASE4x4-4k
1 |
P a g e
1. Introduction
1.1
Introduction to the MX-HDBASE4X4-4K
The KanexPro MX-HDBASE4X4-4K matrix switcher is a professional 4 HDMI input to 4
HDBaseT output switch with 2 HDMI mirrored outputs designed for routing 4K/60 Hz
applications supporting HDCP 2.2. For proficient audio capabilities, it includes 4 stereo
audios and 4 digital coax outputs for de-embedding to analog audio and HDMI digital
audio respectively. Audio sources can also be selected via RS232 commands. Selected
audio is sent via HDMI outputs & HDBaseT outputs and the audio output sockets.
The matrix switcher also features Ethernet port for controlling via web based GUI which
reduces installation time and complicated set-up as well as full control for the matrix.
The HDMI inputs from the matrix can be controlled via front panel buttons, IR, RS232,
or thru a web-based GUI using IP. The selected source is delivered to HDMI Output
1~2 (for HDMI input 1~2) & HDBaseT outputs 1~4 (easy extension to 70m at 1080p
and 35m at 4Kx2K on a single CAT5e/6 connection with optional PoE based HDBaseT
receivers) simultaneously.
Please note: The HDBASE70POER receivers are not included with this matrix switcher
please contact our sales team on ordering these to match your application.
The unit also supports bi-directional RS232& IR control.
1.2
Features
Ultra-fast 4x4 switching over HDBaseT with 4K/60
Distribute four HDBaseT outputs up to 4K/60Hz at 131 ft. (40m) or
Distribute four HDBaseT outputs up to 1080p/60Hz at 230 ft.(70m)
HDCP 2.2 compliant
4K@60Hz with sampling rate of: 4:2:2 & 4:2:0
Supports power over Ethernet (PoE) to all four receivers
Two HDMI mirrored outputs for local monitor support
Dedicated audio zones for digital and stereo audio
Audio De-embedding
Advanced EDID management
Control via Web based GUI &
Bi-directional IR & RS-232 control