KanexPro MX-HDBASE4x4-4k User Manual - Kanexpro
Manual is about: 4K HDBaseT 4x4
of
43
KANEXPRO
MX-HDBASE4x4-4k
26 |
P a g e
segment to the same as the MX-HDBASE4X4-4K’s.
Controlled by PC(s) in LAN
Connect MX-HDBASE4X4-4K, a router and several PCs to setup a LAN (as shown in
the following figure). Set the network segment of MX-HDBASE4X4-4K to the same as
the router’s, then PCs within the LAN are able to control MX-HDBASE4X4-4K.
Follow these steps to connect the devices:
Step1.
Connect the TCP/IP port of the MX-HDBASE4X4-4K to Ethernet port of PC
with twisted pair.
Step2.
Set the PC’s network segment to the same as the MX-HDBASE4X4-4K’s. Do
Router
Internet
PC
TCP IP Port
/
Same network
segment as the
switcher