Karcher HDS 1000 De Handbuch - II. Important Notes
6
HDS 1000 DE
II. Important notes
Unpacking the machine
– Should you find that damage has occurred during transport, inform your dealer immediately.
Fitting accessories
– Connect high-pressure hose to handgun and spray lance and connect to high-pressure outlet of the
pump. Attach nozzle to the spray lance. Please refer to the diagram for positions.
Check the oil level of the high-pressure pump
– Check the oil level at the oil sight-glass. Do not put the machine into operation if the oil level has sunk
below “MIN”. Top up with oil as required (see Technical Data).
Engine
– Before using the machine for the first time, read the operating instructions provided by the engine
manufacturer and take special note of the safety instructions.
– Check the oil level of the engine. Do not put the machine into operation if the oil level has sunk below
“MIN”. Top up with oil as required.
Care of the battery
– The battery has been filled and charged at the factory. If the acid level in the battery approaches
the “MIN” mark, fill with distilled water up to the “MAX” mark.
Water supply
Fit a water hose of at least 3/4" and connect it to the water tap. A suitable 3/4" water hose is available
from Kärcher under Order no. 4.440-222.
– The water supply must yield at least 16 litres per minute.
– Observe the regulations of your water supply company.
– The machine is fitted with a strainer at the pump inlet. Check the strainer regularly for contamination.
Fuel supply
Fuel tank for burner
Fill the fuel tank for the burner with a light fuel oil or diesel oil.
Caution!
Even when operating with cold water, fill the fuel tank until the indicator light showing “fuel tank
empty” goes out. Dry-running will damage the fuel pump.