Karcher HDS 551 C Eco Manual - Maintenance Works
English
31
Figure 1 - Pos. 9
è
Take out sieve.
è
Clean in water and reinstall.
Figure 8
è
Loosen covering nut and take off hose.
Figure 9
è
Take out sieve.
Note
If necessary turn in screw M8 appr. 5 mm in-
wards and therewith pull out sieve.
è
Clean sieve in water.
è
Push sieve inwards.
è
Put on hose.
è
Tighten covering nut firmly.
Figure 10
è
Take out detergent suck hose.
è
Clean filter in water and reinstall.
Figure 11
è
Ready a catch bin for appr. 1 Liter oil.
è
ready catch gutter.
è
loosen release screw.
Kärcher Hint: Use a sliced RM 110 bottle as
a catch gutter.
è
Release oil over the catch gutter into the
catch bin.
è
Tighten release screw.
è
Fill oil slowly up to the MAX marking.
Note
Air pockets must be able to leak out.
For oil type refer to technical specificati-
ons.
Figure 2 - Pos. 2
– Fuel tank empty
è
Refill.
Figure 2 - Pos. 4
– Engine overload/overheat
è
Turn device switch on "0" and let engine
cool off for min. 5 minutes.
è
If malfunction still occurs, have device
checked by customer service.
Figure 2 - Pos. 3
– Liquid softener tank is empty, due to
technical reasons a remainder stays in
the tank.
è
Refill.
– Electrodes in the tank are dirty
è
Clean the electrodes.
Figure 2 - Pos. 5
– Detergent tank is empty.
è
Refill.
Maintenance Works
Clean the sieve in the water connec-
tion
Clean sieve in the water shortage
safe guard
Clean filter at the detergent suck
hose
Oil change
Dispose of old oil ecologically or turn in
at a gathering point.
Faults
Indicator lamp fuel shortage glows
HDS 558.../698.../798...only
Indicator lamp "Ready for use"
turns off
Indicator lamp liquid softener glows
HDS 558.../698.../798...only
Indicator light Chemistry glows
HDS 558.../698.../798...only