Karcher MC 6550(N) User Manual - page 25
EN | 25
EN
Equalizer
Pressing EQ shows the current adjusted sound effect.
Select the desired sound effect by repeated pressing of EQ:
“PASS” means that the equalizer function is deactivated.
Function selector
Each time you press FUNCTION, you can select a different operating mode, see below:
Radio
1.
Turn on the appliance by pressing the STANDBY/ON button and press repeatedly the FUNC-
TION button until “TUNER” is shown on the display.
2.
Select with the BAND button the frequency band “AM” or “FM”. On the display either “AM” or
“FM” is indicated.
Manual tuning
To tune for weak stations: Press
►►SKIP/TUN. UP or ◄◄SKIP/TUN. DOWN, until the correct fre-
quency is shown, or until you achieve the best reception quality.
Automatic tuning
1.
Press and hold
►►SKIP/TUN. UP or ◄◄SKIP/TUN. DOWN at least one second. Then release
the button. The tuner scans automatically for the first radio station with sufficient signal strength.
2.
To select another radio station, repeat the procedure above.
Mono/Stereo
This function can only be used in FM mode.
1.
If you cannot select a FM stereo station, press the ID3/MONO/ST. button. On the Display the
indication “STEREO” is shown. When you receive a FM stereo station the symbol “
” will ap-
pear on the display.
2.
If you press the ID3/MONO/ST. button again, the display will show “MONO” and the FM stereo
indication “
” will disappear. The appliance will switches to the FM mono operation mode.
Programming of preset radio stations
You can also store your favorite stations in the program memory (up to 10 AM and 30 FM stations).
1.
Toggle with BAND between “AM” and “FM”.
2.
Tune the desired radio station.
3.
Press the MEM/C-ADJ. button.
4.
Press the PRESET /FOLDER (◄ or ►) or PRESET FOL (UP or DN) on the remote control to
select the desired memory number.
5.
Press the MEM /C-ADJ. button again to confirm the selection.
6.
For storing additional radio stations, please repeat the steps 2 to 5.
7.
For replacing the stored radio stations, please repeat the steps 2 to 5.
Notes:
•
If within approx. 8 seconds no button is pressed, the storing mode will be canceled and the appli-
ance returns to the last mode.
•
Storing a new station into a preset location will erase the previously stored radio station in that
location.