Karcher MC 6550(N) User Manual - page 29
EN | 29
EN
3.
Press the RANDOM button again to terminate the random playback.
Intro (only on the remote control)
1.
Press once the INTRO button. The “INTRO” indication will light up (see figure F19).
2.
The device will play the first 10 seconds of each track.
3.
Press the INTRO button again to terminate the Intro playback.
Programming the CD player
Up to 32 tracks at an Audio CD or up to 64 tracks at a MP3/WMA CD can be programmed in a specific
sequence. The CD player must be in the stop mode.
Audio CD:
1.
Insert the CD to be programmed into the CD tray and invoke the programming mode with the
MEM/C-ADJ. button.
2.
On the display “MEMORY” and “P-01” will be shown (see figure F20).
3.
Press SKIP/TUN. UP or SKIP/TUN. DOWN to select the first track to be programmed.
4.
When the desired track is shown on the display, press the MEM/C-ADJ. button again.
5.
On the display “MEMORY” and “P-02” will be shown.
6.
Repeat these steps to store additional CD tracks into the program memory.
7.
Afterwards press the PLAY/PAUSE button.The player plays the first programmed track.
Notes:
•
When all tracks are played, the total number and total playback time of the Audio/MP3 CD titles
will be shown on the display.
•
If within approx. 8 seconds no key is pressed, the storing mode will be canceled and the appli-
ance returns to the last mode.
MP3/WMA CD:
1.
Insert the CD to be programmed into the CD tray and invoke with the MEM/C-ADJ. button the
programming mode.
2.
On the display “00”, “MEMORY” and “P-01” will be shown, the album number “00” flashes (see
figure F21).
3.
The album number can be changed by pressing PRESET/FOLDER (◄ or ►) or PRESET FOL
(UP or DN) on the remote control.
4.
Press the MEM/C-ADJ. button again, the track number flashes (see figure F22).
5.
Press SKIP/TUN. UP or SKIP/TUN. DOWN to select the first track to be programmed.
6.
When the desired track is shown on the display, press the MEM/C-ADJ. button again.
7.
On the display “00”, “MEMORY” and “P-02” will be shown.
8.
Repeat these steps to store additional CD tracks into the program memory.
9.
Afterwards press the PLAY/PAUSE button. The player plays the first programmed track.
Notes:
•
When all tracks are played, the total number and total playback time of the Audio/MP3 CD titles
will be shown on the display.
•
If within approx. 8 seconds no button is pressed, the storing mode will be canceled and the appli-
ance returns to the last mode.